buttons HYUNDAI I20 2014 Owners Manual

)' #10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
IInformation
Never place anything near the sensor
located to ensure better control of the
heating and cooling system.
Manual heating and air condition-
ingThe heating and cooling system can
be controlled manually by pressing
buttons other than the AUTO button.
In this case, the system works
sequentially according to the order of
buttons selected.
When pressing any button (or turning
any knob) except the AUTO button
while using automatic operation, the
functions not selected will be con-
trolled automatically.
1. Start the engine.
2. Set the mode to the desired posi- tion.
To improve the effectiveness of
heating and cooling:- Heating:
- Cooling: 3. Set the temperature control to the
desired position.
4. Set the air intake control to the outside (fresh) air position.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
7. Press the AUTO button in order to convert to full automatic control of
the system.
i
OIB044080

SSteering wheel audio control
(if equipped)The steering wheel audio control but-
ton is installed to promote safe driving.
Do not operate audio remote control
buttons simultaneously.VOLUME (VOL +/-) (1)• Press the up button (+) to increase volume.
• Press the down button (-) to decrease volume.SEEK/PRESET ( / ) (2)If the SEEK/PRESET button is
pressed for 0.8 second or more, it
will work as follows in each mode.RADIO modeIt will function as the AUTO SEEK
select button. It will SEEK until next
channel is reached.MEDIA modeIt will function as the FF/REW button. If the SEEK/PRESET button is
pressed for less than 0.8 second, it
will work as follows in each mode.
RADIO modeIt will function as the PRESET STA-
TION select buttons.MEDIA modeIt will function as the TRACK
UP/DOWN button.MODE (3)Press the MODE button to toggle
between available Media sources
like Radio, USB, iPod, BT Audio,
AUX(Auxiliary).MUTE (4, if equipped)• Press the button to mute the
sound.
• Press the button again to activate the sound.
Detailed information for audio control
buttons is included in the following
pages in this chapter.
NOTICE
!'%$&%" '&$#
OIB047037OIB047168
■ Type A
■ Type B

##!'%$&%" '&$
(( Continued)
• In case of product malfunction, please contact your place of pur-
chase or After Service ce nter.
• Placing the audio system within an electromagnetic environment may
result in noise interference.
• Prevent caustic solutions such as perfume and cosmetic oil from
contacting the dashboard because
they ma y cause damage or discol-
oration.
RadioRadio ModeChange Mode:
[RADIO
]button
• You can toggle between the radio modes using
[RADIO]
button.
• If
[SETUP/CLOCK]
 [Display] 
[Mode Popup] is turned [Off], then
each time you press the
[RADIO]
button, you can toggle between
radio modes (FM1 ➟ FM2 ➟AM ➟
DRM ➟FM1).
• The radio mode popup will not be displayed when
[SETUP/CLOCK]
button [Display] [Mode popup]
is turned [Off].
Search Frequency:
[SEEK/TRACK]
button• Searches the previous/next broad- cast frequencies.
- Short press of button: searchesthe previous/next available
broadcast frequency.
- Long press of button: Frequency is controlled by 1 step quickly.
When the button is released after
pressing and holding, searches
the previous/next available
broadcast frequency.Change Frequency:
TUNE
knob
Changes frequency by turning the
knob left/right. You can seek avail-
able frequencies manually.Saved Frequency:
[1] ~ [6]
(Preset)
buttons
• Pressing the button: Plays the fre-
quency saved in the corresponding
button.
• Pressing and holding the button (more than 1.0 second): Saves the
currently playing broadcast to the
selected button and sound a BEEP.

#
!'%$&%" '&$
FFM/AM ModeDisplays Menu Popup when pressing
the
[MENU]
button.
Auto StoreSaves broadcasts with superior
reception to
[1] ~ [6]
buttons. If no
frequencies are received, then the
most recently received frequency will
be broadcast.
ScanThe broadcast frequency increases
and previews each broadcast for 5
seconds each. After scanning all fre-
quencies, returns and plays the cur-
rent broadcast frequency.Sound SettingsMoves to Sound Settings.
DRM Mode❈ The actual features may differ
from the illustration.
❈ May change according to the
transmission content of DRM.
❈ No Signal: Represents there is no
broadcasting from the selected
DRM frequency.
Displays Menu Popup when pressing
the
[MENU]
button.
Weather/News Report (DRM only)Weather/News report feature On/Off.
Information
The availability of Weather/News
report information completely
depends on the DRM broadcasting
station.
PresetsDisplays saved presets.Service List (DRM only)• A broadcasting DRM station can have 1 ~ 4 Services depending on
the transmission.
- You can select the desired serv-ice from the list.Auto StoreSaves broadcasts with superior
reception to
[1] ~ [6]
buttons. If no
frequencies are received, then the
most recently received frequency will
be broadcast.
ScanThe broadcast frequency increases
and previews each broadcast for 5
seconds each. After scanning all fre-
quencies, returns and plays the cur-
rent broadcast frequency.Sound SettingsMoves to Sound Settings.
i

#
!'%$&%" '&$
IInformation- Using Bluetooth
®
(BT) Audio
(if equipped)
• Bluetooth
®Audio Mode can be used
only when a Bluetooth
®
phone has
been connected.
• Bluetooth
®
Audio Mode will not be
available when connecting mobile
phones that do not support this fea-
ture.
• If a Bluetooth
®
Phone is being used
to play music and receives an
incoming or outgoing phone call,
then the music will stop.
• Moving the Track up/down while playing Bluetooth®audio mode may
result in pop noises with some
mobile phones.
• Bluetooth
®
streaming audio may
not be supported in some mobile
phones.
• When returning to Bluetooth
®
Audio mode after ending a call, the
mode may not automatically restart
in some mobile phones.
• Receiving an incoming call or mak- ing an outgoing call while playing
Bluetooth
®
Audio may result in
audio interference.
Media ModeChange Mode:
[MEDIA]
button
• Each time the button is pressed, the media mode popup will be dis-
played or closed.
• The media mode popup will not be displayed when
[SETUP/CLOCK]
button [Display] [Mode popup]
is turned [Off].
You can select a menu in the mode
popup by using the
[1]
~
[6]
(Preset) buttons or
TUNE
knob.
• If media device(USB, AUX) is con- nected, then it will automatically
operate. Once it is disconnected,
the previous mode will be restored.
• The Audio/Bluetooth
®(BT) Audio*/
AUX volume can also be con-
trolled.
* if equipped
Information
When you connect an Apple device,
playback does not start automatically.
Repeat:
[1 RPT]
button
• Repeats the current song or repeats all songs within the current
folder.
•iPod
®
mode: Repeat Song ➟
Repeat Off
• USB mode: Repeat Song ➟
Repeat Folder ➟ Off
Shuffle:
[2 SHFL]
button
• Plays all songs within the current
folder(category) or play all songs in
random order.
•iPod
®
mode: Shuffle All ➟ Shuffle
Off
• USB mode: Shuffle Folder ➟
Shuffle All ➟ Off
i
i

##
!'%$&%" '&$
Hyundai iblue is a smart phone
remote control Application which
allows passengers to control car info-
tainment system functions such as
Radio, Media, Sound via BluetoothSS ystem requirements
:
Application name : Hyundai iblue
Available OS : Android
App Availability : Play store
Supported Mobiles : Android
mobiles with Version 4.4(Kitkat) &
above.
Main Features
:
Selection & Control of Media
Change of Radio stations with
Seek/Track buttons
Switch between different Media
sources: USB, iPod, Aux and
Bluetooth Audio etc
Standard media player functions:
Play/Pause track, Next/Previous
track
Control the volume: Increase,
decrease & mute
Change Sound Settings
Control of USB Video (if Infotainment
supports video feature)
Ensure that Bluetooth of mobile
device is ON before using application
For Remote Application working,
Infotainment System should be
paired with smart phone & connect-
ed to Hyundai iblue application.
(please note that remote control con-
nection establishment is different
from pairing the device)
The compatibility and features of this app may vary with vehicle variants.
Infotainment system can be con-
trolled by one mobile (via Hyundai
iblue application) at a time
Note that application doesn’t work
during Connectivity mode.
If connection is lost due to abnormal
conditions while a Remote control is
connected (communication range
exceeded, device power OFF, com-
munication errors, etc.), we need to
Establish the Connection again.
For Better experience, pair the
Mobile device with the Infotainment
system before using the application.
Don'ts
:
Please Don’t turn off mobile
Bluetooth while using Application
NOTICE
#&)*''*
)'*)
'*'#
*)
&$%(

#&)
%!!#(%*('
(
)&(!!)$