display HYUNDAI I20 2023 Workshop Manual

Page 262 of 649

5-121
05
Pausing/Resuming playback
To pause playback, press the [781(]
knob on the control panel. To resume
playback, press the [781(] knob again.
[You can also press the Mute button on
the steering wheel remote control.
Playing repeatedly
On the control panel, press the
[537] button. The repeat play mode
changes each time you press it. The
corresponding mode icon will be
displayed on the screen.
Playing in random order
On the control panel, press the
[6+)/] button. The shuffle play mode is
activated or deactivated each time you
press it. When you activate the shuffle
mode, the corresponding mode icon will
be displayed on the screen.
NOTICE
'HSHQGLQJRQWKHFRQQHFWHG%OXHWRRWK
GHYLFHRUPRELOHSKRQHUHSHDW 
UDQGRPRUGHUIHDWXUHVPD\QRWEH
VXSSRUWHG
NOTICE
[ 'HSHQGLQJRQWKHFRQQHFWHG
%OXHWRRWKGHYLFHPRELOHSKRQH
RUWKHPXVLFSOD\HU\RXDUHXVLQJ
SOD\EDFNFRQWUROVPD\GLIIHU
[ 'HSHQGLQJRQWKHPXVLFSOD\HU\RX
DUHXVLQJVWUHDPLQJPD\QRWEH
VXSSRUWHG
[ 'HSHQGLQJRQWKHFRQQHFWHG
%OXHWRRWKGHYLFHRUPRELOH
SKRQHVRPHIXQFWLRQVPD\QRWEH
VXSSRUWHG
[ ,ID%OXHWRRWKHQDEOHGSKRQHLVEHLQJ
XVHGWRSOD\PXVLFDQGLWUHFHLYHVRU
PDNHVDSKRQHFDOOWKHPXVLFZLOO
VWRS
[ 5HFHLYLQJDQLQFRPLQJFDOORUPDNLQJ
DQRXWJRLQJFDOOZKLOVWSOD\LQJ
%OXHWRRWKDXGLRPD\UHVXOWLQDXGLR
LQWHUIHUHQFH
[ ,I\RXXVHWKH%OXHWRRWKSKRQH
PRGHZKLOVWXVLQJ%OXHWRRWKDXGLR
SOD\EDFNPD\QRWDXWRPDWLFDOO\
UHVXPHDIWHU\RXHQGWKHFDOO
GHSHQGLQJRQWKHFRQQHFWHGPRELOH
SKRQH
[ 0RYLQJWKHWUDFNXSGRZQZKLOVW
SOD\LQJ%OXHWRRWKDXGLRPRGHPD\
UHVXOWLQSRSQRLVHVZLWKVRPH
PRELOHSKRQHV
[ 7KH5HZLQGLQJ)DVWIRUZDUGLQJ
IXQFWLRQLVQRWVXSSRUWHGLQWKH
%OXHWRRWKDXGLRPRGH
[ 7KHSOD\OLVWIHDWXUHLVQRWVXSSRUWHG
LQWKH%OXHWRRWKDXGLRPRGH
[ ,IWKH%OXHWRRWKGHYLFHLV
GLVFRQQHFWHG%OXHWRRWKDXGLRPRGH
ZLOOHQG

Page 268 of 649

5-127
05
The Pan-European eCall system is an
automatic emergency call service made
in event of a traffic accident or other
accidents on the roads.
SOS
Driver or passenger manually can
make an emergency call in the single
duty dispatch service, by pressing SOS
button to call the necessary emergency
services.
[Stops sound and SOS is displayed on
screen.
SOS Test (for Russia)
You can start the Pan-European eCall
test mode by pressing the SOS TEST
button.
[Stops sound and SOS TEST is
displayed on screen.
NOTICE
[ )RUPRUHLQIRUPDWLRQUHIHUWR
WKHU(PHUJHQF\VLWXDWLRQVVLQWKH
PDQXDO
[ 'HSHQGLQJRQ\RXUUHJLRQWKH
VHUYLFHPD\QRWEHVXSSRUWHG
[ 'HSHQGLQJRQ\RXUUHJLRQRUYHKLFOH
PRGHOWKHQDPHRIWKHEXWWRQPD\
YDU\
3$1

Page 269 of 649

5-128
Convenient features
Status icons appear at the top of the
screen to display the current system
status.
Familiarise yourself with the status icons
that appear when you perform certain
actions or functions and their meanings.
Bluetooth
,FRQ 'HVFULSWLRQ
Battery level of connected
Bluetooth device
Mobile phone or audio device
connected via Bluetooth
Bluetooth call in progress
Microphone turned off during
Bluetooth call
Downloading call history from
a mobile phone connected via
Bluetooth to the system
Downloading contacts from a
mobile phone connected via
Bluetooth to the system
Signal strength
,FRQ 'HVFULSWLRQ
Signal strength of the mobile
phone connected via Bluetooth
NOTICE
[ 7KHEDWWHU\OHYHOGLVSOD\HGRQWKH
VFUHHQPD\GLIIHUIURPWKHEDWWHU\
OHYHOGLVSOD\HGRQWKHFRQQHFWHG
GHYLFH
[ 7KHVLJQDOVWUHQJWKGLVSOD\HGRQWKH
VFUHHQPD\GLIIHUIURPWKHVLJQDO
VWUHQJWKGLVSOD\HGRQWKHFRQQHFWHG
PRELOHSKRQH
[ 'HSHQGLQJRQYHKLFOHPRGHOVDQG
VSHFLILFDWLRQVVRPHVWDWXVLFRQV
PD\QRWEHGLVSOD\HG
6<67(067$786,&216

Page 277 of 649

6-4
Driving your vehicle
Before entering the vehicle
[Be sure all windows, outside mirror(s),
and outside lights are clean and
unobstructed.
[Remove frost, snow, or ice.
[Visually check the tyres for uneven
wear and damage.
[Check under the vehicle for any sign
of leaks.
[Be sure there are no obstacles behind
you if you intend to back up.
Before starting
[Make sure the bonnet, the tailgate,
and the doors are securely closed and
locked.
[Adjust the position of the seat and
steering wheel.
[Adjust the inside and outside rearview
mirrors.
[Verify all the lights work.
[Fasten your seat belt. Check that all
passengers have fastened their seat
belts.
[Check the gauges and indicators in the
instrument panel and the messages
on the instrument display when the
ignition switch is in the ON position.
[Check that any items you are carrying
are stored properly or fastened down
securely.
WARNING
To reduce the risk of SERIOUS
INJURY or DEATH, take the following
precautions:
[ALWAYS wear your seat belt. All
passengers must be properly belted
whenever the vehicle is moving. For
more details, refer to “Seat Belts” in
chapter 3.
[Always drive defensively. Assume
other drivers or pedestrians may be
careless and make mistakes.
[Stay focused on the task of driving.
Driver distraction can cause
accidents.
[Leave plenty of space between you
and the vehicle in front of you.
WARNING
NEVER drink or take drugs and drive.
Drinking or taking drugs and driving
is dangerous and may result in an
accident and SERIOUS INJURY or
DEATH.
Drunk driving is the number one
contributor to the highway death
toll each year. Even a small amount
of alcohol will affect your reflexes,
perceptions and judgment. Just
one drink can reduce your ability to
respond to changing conditions and
emergencies and your reaction time
gets worse with each additional drink.
Driving whilst under the influence
of drugs is as dangerous or more
dangerous than driving under the
influence of alcohol.
You are much more likely to have a
serious accident if you drink or take
drugs and drive. If you are drinking or
taking drugs, don’t drive. Do not ride
with a driver who has been drinking
or taking drugs. Choose a designated
driver or call a taxi.
BEFORE DRIVING

Page 294 of 649

6-21
06
Transmission ranges
The indicator in the instrument cluster
displays the shift lever position when the
ignition switch is in the ON position.
3 3DUN 
Always come to a complete stop before
shifting into P (Park).
To shift from P (Park), you must depress
firmly on the brake pedal and make sure
your foot is off the accelerator pedal.
If you have done all of the above and
still cannot shift the lever out of P
(Park), see “Shift-Lock Release” in this
chapter.
The shift lever must be in P (Park) before
turning the engine off.
WARNING
[Shifting into P (Park) whilst the
vehicle is in motion may cause you to
lose control of the vehicle.
[After the vehicle has stopped, always
make sure the shift lever is in P (Park),
apply the parking brake, and turn the
engine off.
[When parking on an incline, place the
shift lever in P (Park) and apply the
parking brake to prevent the vehicle
from rolling downhill.
[For safety, always engage the parking
brake with the shift lever in the P
(Park) position except for the case of
emergency parking.
5 5HYHUVH 
Use this position to drive the vehicle
backward.
NOTICE
Always come to a complete stop before
shifting into or out of R (Reverse); you
may damage the transmission if you
shift into R (Reverse) whilst the vehicle
is in motion.
1 1HXWUDO 
The wheels and transmission are not
engaged.
Use N (Neutral) if you need to restart
a stalled engine, or if it is necessary to
stop with the engine ON. Shift into P
(Park) if you need to leave your vehicle
for any reason.
Always depress the brake pedal when
you are shifting from N (Neutral) to
another gear.
WARNING
Do not shift into gear unless your foot is
firmly on the brake pedal. Shifting into
gear when the engine is running at high
speed can cause the vehicle to move
very rapidly. You could lose control of
the vehicle and hit people or objects.
' 'ULYH 
This is the normal driving position. The
transmission will automatically shift
through a 6-gear sequence, providing
the best fuel economy and power.
For extra power when passing another
vehicle or driving uphill, depress the
accelerator fully. The transmission will
automatically downshift to the next
lower gear (or gears, as appropriate).

Page 301 of 649

6-28
Driving your vehicle
NOTICE
V Always come to a complete stop
before shifting into D (Drive) or R
(Reverse).
V Do not put the shift lever in N
(Neutral) whilst driving.
WARNING
Due to transmission failure, you may
not continue to drive and the position
indicator and the position indicator (D,
P) on the instrument cluster will blink.
We recommend that you contact a
HYUNDAI authorised repairer and have
the system checked.
DCT warning messages
This warning message is displayed when
vehicle is driven slowly on a grade and
the vehicle detects that the brake pedal
is not applied.
OBC3070112TU
6WHHSJUDGH
Driving up hills or on steep grades:
[To hold the vehicle on an incline use
the foot brake or the parking brake.
[When in stop-and-go traffic on an
incline, allow a gap to form ahead
of you before moving the vehicle
forward. Then hold the vehicle on the
incline with the foot brake.
[ If the vehicle is held or creeping
forward on an incline by applying
the accelerator pedal, the clutch and
transmission may overheat which
can result in damage. At this time, a
warning message will appear on the
LCD display.
[If the LCD warning is active, the foot
brake must be applied.
[Ignoring the warnings can lead to
damage to the transmission.

Page 302 of 649

6-29
06
OBC3070109TU
7UDQVPLVVLRQKLJKWHPSHUDWXUH
[Under certain conditions, such as
repeated stop-and-go launches on
steep grades, sudden take off or
acceleration, or other harsh driving
conditions, the transmission clutch
temperatures will increase excessively.
Finally the clutch in transmission could
be overheated.
[When the clutch is overheated, the
safe protection mode engages and the
gear position
[indicator on the cluster blinks with
a chime. At this time, ‘Transmission
temp is high! Stop safely’ warning
message will appear on the LCD
display and driving may not be
smooth.
[If this occurs, pull over to a safe
location, stop the vehicle with the
engine running, apply the brakes and
shift the vehicle to P (Park), and allow
the transmission to cool.
[If you ignore this warning, the driving
condition may become worse. You
may experience abrupt shifts, frequent
shifts, or jerkiness. To return to the
normal driving condition, stop the
vehicle and apply the foot brake or
shift into P (Park). Then allow the
transmission to cool for a few minutes
with engine on, before driving off.
[When possible, drive the vehicle
smoothly.
OBC3070107TU/OBC3070108TU
7UDQVPLVVLRQRYHUKHDWHG
[If the vehicle continues to be driven
and the clutch temperatures reach
the maximum temperature limit,
the ‘Trans Hot! Park with engine on’
warning will be displayed. When this
occurs the clutch is disabled until the
clutch cools to normal temperatures.
[The warning will display a time to wait
for the transmission to cool.
[If this occurs, pull over to a safe
location, stop the vehicle with the
engine running, apply the brakes and
shift the vehicle to P (Park), and allow
the transmission to cool.
[When the message ‘Trans cooled.
Resume driving’, appears you can
continue to drive your vehicle.
[When possible, drive the vehicle
smoothly.
If any of the warning messages in the
LCD display continue to blink, for your
safety, we recommend that you contact
a HYUNDAI authorised repairer and have
the system checked.

Page 303 of 649

6-30
Driving your vehicle
Transmission ranges
The indicator in the instrument cluster
displays the shift lever position when the
ignition switch is in the ON position.
3 3DUN 
Always come to a complete stop before
shifting into P (Park).
To shift from P (Park), you must depress
firmly on the brake pedal and make sure
your foot is off the accelerator pedal.
If you have done all of the above and
still cannot shift the lever out of P
(Park), see “Shift-Lock Release” in this
chapter.
The shift lever must be in P (Park) before
turning the engine off.
WARNING
[Shifting into P (Park) whilst the
vehicle is in motion may cause you to
lose control of the vehicle.
[After the vehicle has stopped, always
make sure the shift lever is in P (Park),
apply the parking brake, and turn the
engine off.
[When parking on an incline, place the
shift lever in P (Park) and apply the
parking brake to prevent the vehicle
from rolling downhill.
[For safety, always engage the parking
brake with the shift lever in the P
(Park) position except for the case of
emergency parking.
5 5HYHUVH 
Use this position to drive the vehicle
backward.
NOTICE
Always come to a complete stop before
shifting into or out of R (Reverse); you
may damage the transmission if you
shift into R (Reverse) whilst the vehicle
is in motion.
1 1HXWUDO 
The wheels and transmission are not
engaged.
Use N (Neutral) if you need to restart
a stalled engine, or if it is necessary to
stop with the engine ON. Shift into P
(Park) if you need to leave your vehicle
for any reason.
Always depress the brake pedal when
you are shifting from N (Neutral) to
another gear.
' 'ULYH 
This is the normal driving position. The
transmission will automatically shift
through a 7-gear sequence, providing
the best fuel economy and power.
For extra power when passing another
vehicle or driving uphill, depress the
accelerator fully. The transmission will
automatically downshift to the next
lower gear (or gears, as appropriate).

Page 314 of 649

6-41
06
ESC OFF usage
:KHQ'ULYLQJ
The ESC OFF mode should only be used
briefly to help free the vehicle if stuck in
snow or mud, by temporarily stopping
operation of the ESC, to maintain wheel
torque.
To turn ESC off whilst driving, press the
ESC OFF button whilst driving on a flat
road surface.
NOTICE
To prevent damage to the transmission:
[ 'RQRWDOORZZKHHO V RIRQHD[OHWR
spin excessively whilst the ESC, ABS,
and parking brake warning lights
are displayed. The repairs would not
be covered by the vehicle warranty.
Reduce engine power and do not spin
the wheel(s) excessively whilst these
lights are displayed.
[ :KHQRSHUDWLQJWKHYHKLFOHRQ
a dynamometer, make sure the
ESC is turned off (ESC OFF light
illuminated).
i Information
7XUQLQJWKH(6&RIIGRHVQRWDIIHFW$%6
RUVWDQGDUGEUDNHV\VWHPRSHUDWLRQ
Vehicle Stability Management
(VSM)
The Vehicle Stability Management (VSM)
is a function of the Electronic Stability
Control (ESC) system. It helps ensure the
vehicle stays stable when accelerating
or braking suddenly on wet, slippery and
rough roads where traction over the four
tyres can suddenly become uneven.
WARNING
Take the following precautions when
using the Vehicle Stability Management
(VSM):
[ $/:$<6FKHFNWKHVSHHGDQGWKH
distance to the vehicle ahead. The
VSM is not a substitute for safe
driving practices.
[ 1HYHUGULYHWRRIDVWIRUWKHURDG
conditions. The VSM system will not
prevent accidents. Excessive speed
in bad weather, slippery and uneven
roads can result in severe accidents.

Page 324 of 649

6-51
06
ISG Indication
The ISG System is indicated by lamp on
the instrument cluster. If your vehicle is
equipped with a supervision cluster, the
notice will illuminate on the LCD display.
OBC3060009
The system may require the engine to
manually restart when the light on the
ISG OFF button will illuminate and if your
vehicle is equipped with a supervision
cluster, a warning message comes on
continuously.
OBC3N061014AU
OBC3070110TU/OBC3070111TU
The engine will not start if the shift lever
is moved from the N (neutral) stage to
the D (driving) stage, manual mode, or R
(reverse) stage without stepping on the
brake pedal whilst the engine is stopped
automatically. At this time, if you press
the brake it will be restarted.

Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 90 next >