Smart cruise HYUNDAI I20 2023 Owners Manual

4-15
04
Low Fuel Level Warning
Light
7KLVZDUQLQJOLJKWLOOXPLQDWHV
When the fuel tank is nearly empty.Add
fuel as soon as possible.
NOTICE
Driving with the Low Fuel Level
warning light on or with the fuel level
below “0” can cause the engine to
misfire and damage the catalytic
converter (if equipped).
Master warning light
7KLVLQGLFDWRUOLJKWLOOXPLQDWHV
When there is a malfunction in operation
in any of the following systems:
- Forward Collision-Avoidance Assist
malfunction (if equipped)
- Forward Collision-Avoidance Assist
radar blocked (if equipped)
- Blind-Spot Collision Warning
malfunction (if equipped)
- Blind-Spot Collision Warning radar
blocked (if equipped)
- LED headlamp malfunction
(if equipped)
- High Beam Assist malfunction
(if equipped)
- Smart Cruise Control malfunction
(if equipped)
- Smart Cruise Control radar blocked
(if equipped)
- Tyre Pressure Monitoring System
(TPMS) malfunction
To identify the details of the warning,
look at the LCD display.
Low Tyre Pressure
Warning Light
7KLVZDUQLQJOLJKWLOOXPLQDWHV

[When you set the ignition switch or
Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3
seconds and then goes off.

[When one or more of your tyres
are significantly underinflated (The
location of the underinflated tyres are
displayed on the LCD display).
For more details, refer to “Tyre Pressure
Monitoring System (TPMS)” section in
chapter 8.
7KLVZDUQLQJOLJKWUHPDLQVRQDIWHU
EOLQNLQJIRUDSSUR[LPDWHO\VHFRQGV
RUUHSHDWHGO\EOLQNVRQDQGRIIDW
DSSUR[LPDWHO\VHFRQGLQWHUYDOV

[When there is a malfunction with the
TPMS.
In this case, we recommend that
you have the vehicle inspected by a
HYUNDAI authorised repairer as soon
as possible.
For more details, refer to “Tyre Pressure
Monitoring System (TPMS)” section in
chapter 8.
WARNING
Safe Stopping

[The TPMS cannot alert you to severe
and sudden tyre damage caused by
external factors.

[If you notice any vehicle instability,
immediately take your foot off the
accelerator pedal, apply the brakes
gradually with light force, and slowly
move to a safe position off the road.

4-20
Instrument cluster
Cruise Indicator Light
(if equipped)
7KLVLQGLFDWRUOLJKWLOOXPLQDWHV

[When Cruise Control is enabled.
For more details, refer to "Cruise
Control (CC)" in chapter 7.
SPORT Mode Indicator
Light (if equipped)
7KLVLQGLFDWRUOLJKWLOOXPLQDWHV

[When you select "SPORT" mode as
drive mode.
For more details, refer to "Drive Mode
Integrated Control System" in chapter
6.
SMART Mode Indicator
Light (if equipped)
60$57
7KLVLQGLFDWRUOLJKWLOOXPLQDWHV

[When you select ''SMART" mode as
drive mode.
For more details, refer to "Drive Mode
Integrated Control System'' in chapter
6.
ECO Mode Indicator
Light (If equipped)
7KLVLQGLFDWRUOLJKWLOOXPLQDWHV

[When you select "ECO" mode as drive
mode.
For more details, refer to "Drive Mode
Integrated Control System" in chapter
6.
CUSTOM Mode Indicator
Light (If equipped)&86720
7KLVLQGLFDWRUOLJKWLOOXPLQDWHV

[When you select "CUSTOM" mode as
drive mode.
For more details, refer to "Drive Mode
Integrated Control System" in chapter
6.

4-26
Instrument cluster
LCD display modes
Modes Symbol Explanation
Trip
ComputerThis mode displays driving information such as the tripmeter,
fuel economy, etc.
For more details, refer to "Trip Computer" in this chapter.
Turn By
Turn (TBT)
This mode displays the state of the navigation.
Driving
Assist
- Smart Cruise Control
- Drive Attention Warning
- Intelligent Speed Limit Warning
User
Settings
In this mode, you can change settings of the doors, lamps,
etc.
Warning
- This mode displays warning messages related to the
lamp malfunction, etc.
- Tyre pressure information
The information provided may differ depending on which functions are applicable
to your vehicle.

4-27
04
Trip computer mode
OIK047124N
The trip computer mode displays
information related to vehicle driving
parameters including fuel economy,
tripmeter information and vehicle speed.
For more details, refer to "Trip
Computer" in this chapter.
Turn By Turn (TBT) group
OIK047151N
This group displays the state of the
navigation.
Driving Assist mode
OBC3070041
6&&,6/$
This mode displays the state of Smart
Cruise Control, Intelligent Speed Limit
Assist.
For more details, refer to each system
information Section in chaptet 7.
OBC3070068
'ULYHU$WWHQWLRQ:DUQLQJ
LIHTXLSSHG
This group displays information related
to Driver Attention Warning.
For more details, refer to "Driver
Attention Warning (DAW)" in chapter 7.

4-28
Instrument cluster
Master warning
OTM050218L
This warning light informs the driver the
following situations.
- Forward Collision-Avoidance Assist
malfunction (if equipped)
- Forward Collision-Avoidance Assist
radar blocked (if equipped)
- Blind-Spot Collision Warning
malfunction (if equipped)
- Blind-Spot Collision Warning radar
blocked (if equipped)
- Lamp malfunction (if equipped)
- High Beam Assist malfunction
(if equipped)
- Smart Cruise Control malfunction
(if equipped)
- Tyre Pressure Monitoring System
malfunction
The Master Warning Light illuminates
if one or more of the above warning
situations occur.
At this time, a Master Warning icon (
)
will appear beside the User Settings icon
(
), on the LCD display.
If the warning situation is solved, the
master warning light will be turned
off and the Master Warning icon will
disappear.
ONX4E040023
7\UH3UHVVXUH
This mode displays information related
to Tyre Pressure.
For more details, refer to "Tyre Pressure
Monitoring System (TPMS)" in chapter
8.

4-30
Instrument cluster
'ULYHU$VVLVWDQFH
ItemsExplanation
Drive
convenienceAuto highway speed control
To activate or deactivate the Auto highway speed Control.
For more details, refer to the ''Navigation-based Smart Cruise Control
(NSCC)'' in chapter 7.
Speed limitTo adjust the Speed Limit function.

[6SHHGOLPLWWROHUDQFH

[6SHHGOLPLWDVVLVW

[6/:6SHHG/LPLW:DUQLQJ

[2II
For more details, refer to the “Intelligent Speed Limit Assist (ISLA)” in
chapter 7.
Warning timingTo adjust the warning timing of the driver assistance system.

[1RUPDO/DWH
Warning volumeTo adjust the warning timing of the driver assistance system.

[+LJK0HGLXP/RZ2II
DAW (Drive
attention
warning)
[/HDGLQJYHKLFOHGHSDUWXUHDOHUW
To activate or deactivate the Leading vehicle departure alert.

[,QDWWHQWLYHGULYLQJZDUQLQJ
To activate or deactivate the Driver Attention Warning.
For more details, refer to the “Driver Attention Warning (DAW)” in
chapter 7.
Forward safetyTo adjust Forward Collision-Avoidance Assist function.

[$FWLYH$VVLVW

[:DUQLQJ2QO\

[2II
For more details, refer to the "Forward Collision-Avoidance Assist
(FCA)" in chapter 7.
Lane safetyTo adjust the Lane Keeping Assist function.

[/DQH.HHSLQJ$VVLVW

[/DQH'HSDUWXUH:DUQLQJ

[2II
For more details, refer to "Lane Keeping Assist (LKA)" in chapter 7.
Blind-spot
safetyTo activate or deactivate the Blind-Spot View Monitor.

[$FWLYH$VVLVW

[:DUQLQJ2QO\

[2II
For more details, refer to the "Blind-Spot View Moniter (BVM)" in
chapter 7.

4-44
Instrument cluster
OJX1079237L
6SHHGOLPLWZDUQLQJLIHTXLSSHG
The driver can monitor the information
provided from Intelligent Speed Limit
Assist.
For more details, refer to "Intelligent
Speed Limit Assist (ISLA)" section in
chapter 7.
OTMH040007
(QJLQHWHPSHUDWXUH
Engine coolant temperature gauge
display shows the temperature of the
engine coolant when the engine is
running.
Additional information display
„Type A
OJX1040042E/OJX1040069E
„Type B
'ULYHLQIR'ULYHLQIRUPDWLRQ
Drive information is displayed for 4
seconds after the engine is turned off.
OBC3040015R
'ULYLQJDVVLVWLQIRUPDWLRQ
The current operation conditions of
Manual Speed Limit Assist, Cruise
Control, Smart Cruise Control, Lane
Following Assist, etc. is displayed.

4-45
04
Driving Assist view
OBC3070041R
The status of Manual Speed Limit Assist,
Cruise Control, Smart Cruise Control,
Lane Following Assist, etc. is displayed
when Driving Assist view is selected.
For more details, refer to each system
information section in chapter 7.
Turn By Turn (TBT) view
OJX1049064L
Turn-by-turn navigation, distance/time
to destination information is displayed
when Turn by Turn view is selected.
Vehicle settings (infotainment
system)
OBC3050047
Vehicle Settings in the infotainment
system provides user options for a
variety of settings including door lock/
unlock features, convenience features,
driver assistance settings, etc.
Vehicle Settings menu
1. Driver Assistance
2. Speed limit
3. Cluster
4. Lights
5. Door
6. Convenience
7. Reset
The information provided may differ
depending on which functions are
applicable to your vehicle.
WARNING
Do not operate the Vehicle Settings
whilst driving. This may cause
distraction resulting in an accident.

7
Driving SafetyForward Collision–Avoidance Assist (FCA) (front view camera only) ..................... 7-2
Forward Collision–Avoidance Assist (FCA) (Sensor fusion) ................................... 7-15
Lane Keeping Assist (LKA) .......................................................................................7-30
Blind-Spot Collision Warning (BCW)....................................................................... 7-37
Blind-Spot Collision-Avoidance Assist (BCA) ......................................................... 7-47
Safe Exit Warning (SEW) ......................................................................................... 7-60
Manual Speed Limit Assist (MSLA) ........................................................................ 7-66
Intelligent Speed Limit Assist (ISLA) ....................................................................... 7-70
Driver Attention Warning (DAW) ............................................................................. 7-75
Driving ConvenienceCruise Control (CC) .................................................................................................. 7-81
Smart Cruise Control (SCC) .................................................................................... 7-85
Navigation-Based Smart Cruise Control (NSCC) .................................................. 7-101
Lane Following Assist (LFA) ................................................................................... 7-108
Parking SafetyRear View Monitor (RVM) ....................................................................................... 7-112
Rear Cross-Traffic Collision Warning (RCCW) ....................................................... 7-116
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)......................................... 7-124
Reverse Parking Distance Warning (PDW) ........................................................... 7-135
Forward/Reverse Parking Distance Warning (PDW) ............................................ 7-138
Reverse Parking Collision-Avoidance Assist (PCA) .............................................. 7-143
Parking Assist (PA) ................................................................................................... 7-151
Declaration of conformity ........................................................................... 7-168
7. Driver assistance system

Driver assistance system
7-72
OBC3070090TU
Warning overspeed
When driving at a speed higher than
the displayed speed limit, the red speed
limit indicator will blink.
OBC3070091ROBC3070092R
Changing set speed
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control,
an arrow in the direction of up or down
is displayed to inform the driver that
the set speed needs to be changed. At
this time, the driver can change the set
speed according to the speed limit by
using the + or – switch on the steering
wheel.
WARNING

[If the Speed limit tolerance is set over
‘0’, the set speed will change to a
higher speed than the speed limit of
the road. If you want to drive below
the speed limit, set the Speed limit
tolerance under '0' or use the
– switch on the steering wheel to
lower the set speed.

[Even after changing the set speed
according to the speed limit of the
road, the vehicle can still be driven
over the speed limit. If necessary,
depress the brake pedal to reduce
your driving speed.

[If the speed limit of the road is under
20 mph (30 km/h), the set speed
change function will not work.

[Intelligent Speed Limit Assist
operates using the speed unit in the
instrument cluster set by the driver.
If the speed unit is set to a unit other
than the speed unit used in your
country, Intelligent Speed Limit
Assist may not operate properly.
Information