stop start HYUNDAI IONIQ 6 2023 User Guide

1
1-53
Driving Your Electric Vehicle
Check how to use the devices inside the vehicle that you must know for driving, such as
starting, braking, and shifting the electric vehicle.
Starting and Stopping the Vehicle
Follow the instructions below to start or stop the vehicle.
CAUTION • Always fasten the seat belt before starting the vehicle for safety.
• Check if the EBP is applied before starting the vehicle.

Starting the vehicle
1. Holding the smart key, sit in the driver’s seat.
2. Press the Start/Stop button while pressing the brake pedal.• On the instrument cluster, (ready indicator) is displayed.
Information While the (ready indicator) is displayed, press the brake pedal, shift to D (Drive) or R
(Reverse), and release the EBP and the brake pedal to start moving the vehicle forward or
backward. You can start driving by pressing the accelerator pedal slowly and decelerate or stop by
pressing the brake pedal.

Stopping the vehicle
1. Stop the vehicle completely by pressing the brake pedal.
2. Apply the EPB while pressing the brake pedal, and press the gear’s P button to shift to P (Park).
3. Press the Start/Stop button. • The (ready indicator) on the instrument cluster turns off.
Information There are other Start/Stop button positions besides the ON/OFF. Use it appropriately paying
attention to the discharging of the 12 V battery.
•ACC : The 12 V battery power is turned on, allowing some devices, such as infotainment system
and air conditioning system to operate. Press the Start/Stop button when it is in the OFF position
to turn on ACC.
• ON : The 12 V battery power is turned on, allowing to check the instrument cluster and use all
the electric devices inside the vehicle. Press the Start/Stop button when it is in the ACC position
to turn it ON.

Hyundai_CE_en_US.book Page 53

1
1-59
Checking the warning lights
Check the cause of the warning lights referring to the table below and take appropriate
measures.
Warning LightCauseMeasure
Service warning light This warning light illuminates:
• When there is a problem with
related parts of the electric
vehicle control system, such
as sensors, etc.
• When an actuator, electric compressor for air
conditioning, etc.
malfunctions. In a normal condition, it
illuminates for about 3 seconds
when the Start/Stop button is in
the ON position and then goes
off.
• When the warning light
illuminates while driving, or
does not go off after starting
the vehicle, have your vehicle
inspected by an authorized
HYUNDAI dealer.
Power down indicator light This warning light illuminates:
• When the high voltage
battery level is too low or
voltage is decreasing.
(Output limit occurs when the
charge level is insufficient.)
• When the temperature of the high voltage battery is too
high or too low.
• When the driving system temperature is overheated
and requires protection. If it illuminates alone, it is not
failure.
• If both Power down indicator
light and Service warning
light illuminate at the same
time, have the vehicle
inspected by an authorized
HYUNDAI dealer.
• When the indicator is illuminating, immediately
charge the vehicle. The
driving speed may be limited
and the vehicle may not
properly drive uphill.
High voltage battery level warning light This warning light illuminates
when the high voltage battery
level is low. Immediately charge the
vehicle. The vehicle can drive
an additional 18-31 mi. (30-50
km).
• The actual distance to empty
depends on the driving
conditions.
Regenerative brake warning light This warning light illuminates
when the regenerative brake
does not operate and the brake
does not perform well due to
the malfunction of the brake
system. Drive safely and have your
vehicle inspected by an
authorized HYUNDAI dealer.
• The operation of the brake
pedal may feel deeper than
normal or the braking
distance may increase.
Hyundai_CE_en_US.book Page 59

Introduction/Getting Started with Your Electric Vehicle
1-62
Power limitedThis warning message is
displayed when the power of
the vehicle is limited to ensure
the safety of high-powered
components for the reasons
below:
• The high voltage battery level
is too low or voltage is
decreasing.
• The temperature of the high voltage battery is too high or
too low.
• When the driving system is overheated and requires
protection. If it illuminates alone, it did not
fail.
• Charge the vehicle is the
charge level is low.
• If both Power down indicator light and Service warning
light illuminate at the same
time, have the vehicle
inspected by an authorized
HYUNDAI dealer.
• Do not accelerate or start the vehicle suddenly when the
warning message is
displayed.
• Be careful when the Power down indicator light is
displayed. The vehicle may
not properly drive uphill and
roll back on a slope.
Low EV battery
temperature. Power
limited If you start or turn off the
vehicle when the outside
temperature is low, both
warning messages appear to
protect electric vehicle system.
• If the high voltage battery
charge level is low and parked
outside for a long time,
vehicle power could be
limited due to the low battery
temperature. • Charging the battery before
driving helps increase power.
• If these warning messages are still displayed even after the
ambient temperature has
increased, have the vehicle
inspected and repaired by an
authorized HYUNDAI dealer.
EV Battery
Overheated! Stop
vehicle The high voltage battery
temperature is too high. • Stop the vehicle in a safe place
and turn off the Start/Stop
button and wait until the
battery temperature
decreases.
• If these warning messages are still displayed even after
turning off the engine and
waiting for a sufficient time,
immediately have the vehicle
inspected by an authorized
HYUNDAI dealer.
Warning MessageCauseMeasure
1PXFS
MJNJUFE
-PX
CBUUFSZ

UFNQFSBUVSF
1PXFS
MJNJUFE
#BUUFSZ
PWFSIFBUFE 4UPQ
TBGFMZ
Hyundai_CE_en_US.book Page 62

1
1-63
Stop vehicle and
check power supplyA failure occurs in the power
supply system. Immediately stop the vehicle in
a safe place. Have the vehicle
towed to an authorized
HYUNDAI dealer for inspection
and maintenance.
Unplug vehicle to
start You have started the vehicle
with the charging connector
plugged in. Unplug the charging cable and
start the vehicle.
Charging Door Open You have started the vehicle
with the charging door opened. Check if the charging door is
completely closed after
charging the vehicle.
Charging Stopped.
Check the AC charger These warning messages are
displayed when charging is
stopped for the reasons below:
• There is a problem with the
external AC charger or DC
charger.
• The external AC charger stopped the charging.
• The charging cable is damaged. • Check whether there is any
problem with the external AC
or DC charger and charging
cable.
• Charge the vehicle with an AC charger that has been
approved for proper operation
or a genuine HYUNDAI
portable charger.
• If the same problem occurs, have the vehicle inspected by
an authorized HYUNDAI
dealer.
Warning MessageCauseMeasure
4UPQ
TBGFMZ
BOE
DIFDL
QPXFS TVQQMZ
6OQMVH
WFIJDMF UP
TUBSU
$IBSHJOH
EPPS PQFO
$IBSHJOH
TUPQQFE1MFBTF
DIFDL
UIF
"$
DIBSHFS
Hyundai_CE_en_US.book Page 63

Introduction/Getting Started with Your Electric Vehicle
1-64
Charging Stopped.
Check the cable
connectionThese warning messages are
displayed when charging is
stopped for the reasons below:
• The charging connector is not
correctly connected to the
charging inlet.
• The unlock button on the charging connector is
pressed. • Separate the charging
connector from the vehicle
and reconnect it.
• Check whether there is any problem, such as external
damage, foreign substances,
etc., with the charging
connector and charging inlet.
• Charge the vehicle with a charger that has been
approved for proper operation
or a genuine HYUNDAI
portable charger.
• If the same problem occurs, have the vehicle inspected by
an authorized HYUNDAI
dealer.
Warning MessageCauseMeasure
$IBSHJOH
JOUFSSVQUFE
1MFBTF
DIFDL
UIF
DBCMF
DPOOFDUJPO
Hyundai_CE_en_US.book Page 64

2
2-5
Center Console Overview
A1000601The actual shape may differ from the illustration.
(1) Instrument cluster ...................................................................................................... 4-2
(2) Horn........................................................................................................................... 5-33
(3) Driver’s front airbag ................................................................................................. 3-37
(4) Infotainment system ...............................................................................................5-107
(5) Hazard warning flasher button.................................................................................. 8-2
(6) Start/Stop button ....................................................................................................... 6-4
(7) Automatic climate control system ..........................................................................5-80
(8) Parking/View button ................................................................................................ 7-96
14
5
67
12
13
14
1815
10
11
16
2
3
A
A
B
B
CC
17
89
Hyundai_CE_en_US.book Page 5

3
3-5
Safety Precautions
Adjusting the seats so that you are sitting
in a safe and comfortable position plays
an important role for the safety of the
driver and passengers as much as seat
belts and airbags when in an accident.
WARNING Do not use a cushion that reduces friction
between the seat and the passenger. The
passenger’s hips may slide under the lap
portion of the seat belt during an accident
or a sudden stop.
Serious or fatal internal injuries could
result because the seat belt cannot
operate properly.

Airbags
You can take steps to reduce the risk of
being injured by an inflating airbag.
Sitting too close to an airbag greatly
increases the risk of injury in the event the
airbag inflates. Move your seat as far back
as possible from front airbags while still
maintaining control of the vehicle.
WARNING To reduce the risk of serious injury or
death from an inflating airbag, take the
following precautions:
• Adjust the driver’s seat as far to the rear as possible while maintaining the ability
to control the vehicle.
• Adjust the front passenger seat as far to the rear as possible.
• Hold the steering wheel by the rim with your hands at the 9 o’clock and 3
o’clock positions to minimize the risk of
injuries to your hands and arms.
• NEVER place anything or anyone between you and the airbag.
• Do not allow the front passenger to place feet or legs on the dashboard to
minimize the risk of leg injuries.

Seat belts
Always fasten your seat belt before
starting any trip. At all times, passengers
should sit upright and be properly
restrained. Infants and small children
must be restrained in appropriate Child
Restraint Systems. Children who have
outgrown a booster seat and adults must
be restrained using the seat belts.
WARNING Take the following precautions when
adjusting your seat belt:
• NEVER use one seat belt for more than one occupant.
• Always position the seatback upright with the lap portion of the seat belt
snug and low across the hips.
• NEVER allow children or small infants, or pets to ride on a passenger’s lap.
• Do not route the seat belt across your neck, across sharp edges, or reroute
the shoulder strap away from your
body.
• Do not allow the seat belt to become caught or jammed.

Front Seats
WARNING Take the following precautions when
adjusting your seat:
• NEVER attempt to adjust the seat while the vehicle is moving. The seat could
respond with unexpected movement
and may cause loss of vehicle control
resulting in an accident.
• Do not place anything under the front seats. Loose objects in the driver’s foot
area could interfere with the operation
of the foot pedals, causing an accident.
Hyundai_CE_en_US.book Page 5

Seats & Safety System
3-16
ONE1031080L
To activate seat warmer of each front
seats, touch icon on the infotainment
system. Adjust the temperature by
pressing either or icons.
The seat warmer will automatically stop
when the seat temperature reaches
certain level and will automatically
reactivate when the seat temperature
drops below certain temperature.
• Automatic temperature controlThe seat warmer starts to automatically
control the seat temperature in order to
prevent low temperature burns after
being manually turned on.
You may manually touch the icon to
increase seat temperature. However,
the seat temperature is automatically
adjusted again.
• Auto. Controls That Use Climate Control Settings (for driver’s seat)
The seat warmer automatically controls
the seat temperature depending on the
ambient temperature when the vehicle
is on ( indicator on).
To use this function, it can be enabled
from the Settings menu in the
infotainment system. Select: Setup >
Vehicle > Seat > Heated/Ventilated
Features > Auto. Controls That Use
Climate Control Settings > Seat
Warmer/Ventilation • The seat warmer defaults to the OFF
position whenever the Start/Stop
button is pressed to the ON position.
However, if the Auto. Controls That Use
Climate Control Settings function is on,
the driver’s seat warmer turns on and
off depending on the ambient
temperature.
Information The infotainment system may change after
software updates. For more information, refer
to the user`s manual provided in the
infotainment system and the quick reference
guide.

if equipped
Rear seat warmers
B3000604
• While the vehicle is running, press seat warmer switches located in each seats
to warm the rear seat.
• The seat warmer will automatically stop when the seat temperature reaches
certain level and will automatically
reactivate when the seat temperature
drops below certain temperature.
• Manual temperature control Each time you press the switch, the
temperature setting of the seat is
changed as follows :
OFF → HIGH ( 3 ) → MEDIUM ( 2 ) → LOW ( 1 )
30 min 60 min
OFF → HIGH ( ) → LOW ( )
Hyundai_CE_en_US.book Page 16

3
3-17
• Automatic temperature controlThe seat warmer starts to automatically
control the seat temperature in order to
prevent low temperature burns after
being manually turned on.
You may manually push the switch to
increase seat temperature. However,
the seat temperature is automatically
adjusted again.
• The seat warmer defaults to the OFF position whenever the Start/Stop
button is pressed to the ON position.
• The rear seat warmers can be adjusted from the infotainment system.
ONE1031082L
• Touch rear heat icon in the Heating/Ventilation infotainment
system.
ONE1031078L
To activate seat warmer of each rear
seats, touch icon on the infotainment
system. Adjust the temperature by
pressing either or icons.
Information The infotainment system may change after
software updates. For more information, refer
to the user`s manual provided in the
infotainment system and the quick reference
guide.

Air Ventilation Seats
The air ventilation seats are provided to
cool the front seats by blowing air
through small vent holes on the surface of
the seat cushions and seatbacks.
When the operation of the air ventilation
seat is not needed, keep the air
ventilation seats off.
NOTICE7RSUHYHQWGDPDJHWRWKHDLUYHQWLODWLRQ
VHDWV

[ 1HYHUXVHDVROYHQWVXFKDVSDLQWWKLQQHUEHQ]HQHDOFRKRORUJDVROLQHWR
FOHDQWKHVHDWV

[ $YRLGVSLOOLQJOLTXLGVRQWKHVXUIDFHRI WKHIURQWVHDWVDQGVHDWEDFNVWKLVPD\
FDXVHWKHDLUYHQWKROHVWREORFNDQG
QRWZRUNSURSHUO\

[ 'RQRWSODFHPDWHULDOVVXFKDVSODVWLF EDJVRUQHZVSDSHUVXQGHUWKHVHDWV
7KH\PD\EORFNWKHDLULQWDNHFDXVLQJ
PDOIXQFWLRQRIWKHDLUYHQW

[ 'RQRWFKDQJHWKHVHDWFRYHUV,WPD\ GDPDJHWKHDLUYHQWLODWLRQVHDW

[ ,IWKHDLUYHQWVGRQRWRSHUDWHUHVWDUW WKHYHKLFOH,IWKHUHLVQRFKDQJHKDYH
WKHYHKLFOHLQVSHFWHGE\DQDXWKRUL]HG
+<81'$,GHDOHU

OFF → HIGH ( ) → LOW ( )
NJO
Hyundai_CE_en_US.book Page 17

Seats & Safety System
3-18
if equipped
Front air ventilation seats
Infotainment system
ONE1031085L
While the vehicle is running, touch
Heating/Ventilation icon in the
infotainment system.
Climate control panel
B3000602
Press in the front climate control
panel.
ONE1031080L
To activate air ventilation of each front
seats, touch icon on the infotainment
system. Adjust the airflow by pressing
either or icons.• If the air ventilation seat is position to
&#39;HIGH&#39;, fan speed increases depending
on the vehicle speed and driving time.
• Use the air ventilation seat with the air conditioning on for more effective
ventilation.
• It may take 3-5 minutes after switch operation to feel the temperature
change.
• Auto. Controls That Use Climate Control Settings (for driver’s seat)
The air ventilation seat automatically
controls the seat temperature
depending on the ambient temperature
when the vehicle is on ( indicator
on).
To use this function, it can be enabled
from the Settings menu in the
infotainment system. Select: Setup >
Vehicle > Seat > Heated/Ventilated
Features > Auto. Controls That Use
Climate Control Settings > Seat
Warmer/Ventilation
• The air ventilation seats defaults to the OFF position whenever the Start/Stop
button is pressed to the ON position.
However, if the Auto. Controls That Use
Climate Control Settings function is on,
the driver’s air ventilation seat turns on
and off depending on the ambient
temperature.
Information The infotainment system may change after
software updates. For more information, refer
to the user&#39;s manual provided in the
infotainment system and the quick reference
guide.

Hyundai_CE_en_US.book Page 18