warning HYUNDAI PALISADE 2023 Owner's Manual

Page 56 of 661

Seats & Safety System3-26
Armrest (Second row seat)
B0053KO09
B0053KO10
A: 7-seater
B: 8-seater
The armrest is located in the center of
the rear seat. Pull the armrest down from
the seatback to use it.
To adjust the armrest at a convenient
angle, lower the armrest from the highest
position to the lowest position, and lift it
up to fixed on it.
Since it cannot be adjusted downward
after fixing, lift the armrest slightly more
than the highest position, then lower it
to the lowest position and adjust while
lift it up.
Head Restraint
The vehicle’s front and rear seats
have adjustable head restraints. The
head restraints provide comfort for
passengers, but more importantly they
are designed to help protect passengers
from whiplash and other neck and spinal
injuries during an accident, especially in
a rear impact collision.
WARNING
To help reduce the risk of serious
injury or death in an accident, take the
following precautions when adjusting
your head restraints:
[ Always properly adjust the head
restraints for all passengers BEFORE
starting the vehicle.
[ NEVER let anyone ride in a seat
with the head restraint removed or
reversed.
[
B0701EU01
Adjust the head restraints so the
middle of the head restraint is at the
same height as the height of the top
of the eyes.
[ NEVER adjust the head restraint
position of the driver’s seat when the
vehicle is in motion.
[ Adjust the head restraint as close to
the passenger’s head as possible. Do
not use a seat cushion that holds the
body away from the seatback.
[ Make sure the head restraint locks
into position after adjusting it.

Page 57 of 661

03
3-27
WARNING
B0053KO24
When sitting on the rear seat, do not
adjust the height of the head restraint
to the lowest position.
CAUTION
When there is no occupant in the rear
seats, adjust the height of the head
restraint to the lowest position. The
rear seat head restraint can reduce the
visibility of the rear area.
NOTICE
To prevent damage, NEVER hit or pull
on the head restraints.
Front seat head restraints
B0701EU02
The driver’s and front passenger’s seats
are equipped with adjustable head
restraints for the passengers safety and
comfort.
B0052KO13
Adjusting the height up and down
To raise the head restraint:
1.
Pull it up to the desired position M.
To lower the head restraint:
1. Push and hold the release button N on the head restraint support.
2. Lower the head restraint to the desired position O.

Page 58 of 661

Seats & Safety System3-28
NOTICE
B0052KO14
If you recline the seatback towards the
front with the head restraint and seat
cushion raised, the head restraint may
come in contact with the sunvisor or
other parts of the vehicle.
B0052KO15
B0052KO16
A: Manual seat
B: Power seat
Removal/Reinstall
To remove the head restraint:
1.

Recline the seatback N with the
seatback angle switch M.
2. Raise the head restraint as far as it can go.
3. Press the head restraint release button O while pulling the head restraint up
P.
WARNING
NEVER allow anyone to travel in a seat
with the head restraint removed.

Page 59 of 661

03
3-29
B0052KO18
B0052KO19
A: Manual seat
B: Power seat
To reinstall the head restraint :
1. Recline the seatback.
2. Put the head restraint poles N into
the holes while pressing the release
button M.
3. Adjust the head restraint to the appropriate height.
4. Recline the seatback P with the seatback angle switch O.
WARNING
Always make sure the head restraint
locks into position after reinstalling and
adjusting it properly.
Rear seat head restraints
B0701EU03
*: If equipped
The rear seats are equipped with head
restraints in all the seating positions for
the passenger’s safety and comfort.
B0701EU04
Adjusting the height up and down
To raise the head restraint:
1.

Pull it up to the desired position M.
To lower the head restraint:
1. Push and hold the release button N on the head restraint support.
2. Lower the head restraint to the desired position O.

Page 61 of 661

03
3-31
Wing-out headrest adjustment (if
equipped)
B0706EU01
While driving, the wing-out headrest
supports the passenger’s head from
shaking. Hold both ends of the wing-out
headrest with your hands, and pull out or
push in to adjust its position.
Information
When the wing-out headrest is not in use,
hold both ends of the headrest and pull out
to return it to its original position.
Seat Warmers
Seat warmers are provided to warm the
seats during cold weather.
During mild weather or under conditions
where the operation of the seat warmer
is not needed, keep the seat warmers
OFF.
WARNING
The seat warmers can cause a SERIOUS
BURN, even at low temperatures and
especially if used for long periods of
time.
Passengers must be able to feel if the
seat is becoming too warm so they can
turn it off, if needed.
People who cannot detect temperature
change or pain to the skin should
use extreme caution, especially the
following types of passengers:
[Infants, children, elderly or disabled
persons, or hospital outpatients.
[ People with sensitive skin or who
burn easily.
[ Fatigued individuals.
[ Intoxicated individuals.
[ People taking medication that can
cause drowsiness or sleepiness.

Page 62 of 661

Seats & Safety System3-32
WARNING
NEVER place anything on the seat
that insulates against heat when the
seat warmer is in operation, such as a
blanket or seat cushion. This may cause
the seat warmer to overheat, causing a
burn or damage to the seat.
NOTICE
To prevent damage to the seat warmers
and seats:
[ Never use a solvent such as paint
thinner, benzene, alcohol or gasoline
to clean the seats.
[ Do not place heavy or sharp objects
on seats equipped with seat
warmers.
[ Do not change the seat cover. It may
damage the seat warmer.B0056KO01
B0056KO02
B0056KO07
A: Front seat,
B: 2nd row seat,
C: 3rd row seat (if equipped)
While the engine is running, push either
of the switches to warm the driver's seat
or front passenger's seat.
The seat warmer will operate and the
warming light will illuminate to indicate
that the function is in use.

Page 66 of 661

Seats & Safety System3-36
SEAT BELTS
This section describes how to use the
seat belts properly. It also describes
some of the things not to do when using
seat belts.
Seat Belt Safety Precautions
Always fasten your seat belt and make
sure all passengers have fastened their
seat belts before starting any trip. Air
bags are designed to supplement the
seat belt as an additional safety device,
not a replacement. Most states require all
occupants of a vehicle to wear seat belts.
WARNING
Seat belts must be used by ALL
passengers whenever the vehicle is
moving. Take the following precautions
when adjusting and wearing seat belts:
[ ALWAYS properly restrain children
under age 13 in the rear seats.
[ NEVER allow children to ride in the
front passenger seat. If a child age 13
or older must be seated in the front
seat, move the seat as far back as
possible and properly restrain them
in the seat.
[ NEVER allow an infant or child to be
carried on an occupant’s lap.
[ NEVER ride with the seatback
reclined when the vehicle is moving.
[ Do not allow children to share a seat
or seat belt.
[ Do not wear the shoulder belt under
your arm or behind your back.
[ Always wear both the shoulder
portion and lap portion of the lap/
shoulder belt. [
NEVER wear a seat belt over fragile
objects. If there is a sudden stop or
impact, the seat belt can damage it.
[ Do not use the seat belt if it is
twisted. A twisted seat belt will not
protect you properly in an accident.
[ Do not use a seat belt if the webbing
or hardware is damaged.
[ Do not latch the seat belt into the
buckles of other seats.
[ NEVER unfasten the seat belt
while driving. This may cause loss
of vehicle control resulting in an
accident.
[ Make sure there is nothing in the
buckle interfering with the seat belt
latch mechanism. This may prevent
the seat belt from fastening securely.
[ No modifications or additions
should be made by the user which
will either prohibit the seat belt
adjusting devices from operating to
remove slack, or prohibit the seat
belt assembly from being adjusted to
remove slack.
WARNING
Damaged seat belts and seat belt
assemblies will not operate properly.
Always replace:
[Frayed, contaminated, or damaged
webbing.
[ Damaged hardware.
[ The entire seat belt assembly after it
has been worn in an accident, even
if damage to webbing or assembly is
not apparent.

Page 67 of 661

03
3-37
Seat Belt Warning Light
Front seat belt warning
„Instrument cluster
B0059KO02
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
the ignition switch is in the ON position
regardless of belt fastening.
If you continue not to fasten the seat belt
and you drive over 6 mph (9 km/h), the
warning light will stay illuminated.
If you continue not to fasten the seat
belt and you drive over 12 mph (20 km/h)
the seat belt warning chime will sound
for approximately 100 seconds and the
corresponding warning light will blink.
If you unfasten the seat belt while driving
under 12 mph (20 km/h), the seat belt
warning light will illuminate until the seat
belt is fastened.
If you unfasten the seat belt while
driving over 12 mph (20 km/h), the
seat belt warning chime will sound for
approximately 100 seconds and the
corresponding warning light will blink.
Rear passenger's seat belt warning
B0059KO04
A: 7-seater vehicle, B: 8-seater vehicle
With the ignition switch ON, if the
second row center seat passenger’s seat
belt is not fastened, the corresponding
seat belt warning light will illuminate
for 70 seconds. But, if the seatbelt
is fastened after 6 seconds, the
corresponding seat belt warning light
will immediately turn off.
If the seat belt is fastened, and then
unfastened while driving below 12 mph
(20 km/h), the corresponding seat
belt warning light will illuminate for 70
seconds.
If the seat belt is fastened, and then
unfastened while driving above 12 mph
(20 km/h), the corresponding seat belt
warning light will blink and the warning
chime will sound for approximately 35
seconds.

Page 68 of 661

Seats & Safety System3-38
WARNING
Riding in an improper position
adversely affects the front passenger’s
seat belt warning system. It is important
for the driver to instruct the passenger
to properly be seated as instructed in
this manual.
Information
[ Although the front passenger seat is not
occupied, the seat belt warning light
will blink or illuminate for 6 seconds.
[ The front passenger’s seat belt warning
may operate when luggage is placed on
the front passenger seat.
Seat Belt Restraint System
WARNING
Improperly positioned seat belts may
increase the risk of serious injury
in an accident. Take the following
precautions when adjusting the seat
belt:
[Position the lap portion of the seat
belt as low as possible across your
hips, not on your waist, so that it fits
snugly.
[ Position one arm under the shoulder
belt and the other over the belt, as
shown in the illustration.
[ Always position the shoulder belt
anchor into the locked position at the
appropriate height.
[ Never position the shoulder belt
across your neck or face.

Page 75 of 661

03
3-45
Pre-tensioner seat belt (Drive and
front passenger)
B0060KO01
Your vehicle is equipped with driver’s
and front passenger’s Pre-tensioner
Seat Belts (Retractor Pre-tensioner). The
purpose of the pre-tensioner is to make
sure the seat belts fit tightly against the
occupant’s body in certain frontal or
side collision(s). The pre-tensioner seat
belts may be activated in crashes where
the frontal or side collision(s) is severe
enough, together with the air bags.
When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
into position.
In certain frontal collisions, the pre-
tensioner will activate and pull the seat
belt into tighter contact against the
occupant’s body.
If the system senses excessive tension
on the driver or passenger’s seat belt
when the pre-tensioner system activates,
the load limiter inside the retractor
pre-tensioner will release some of the
pressure on the affected seat belt.
WARNING
Pre-tensioner Seat Belts that
malfunction may not protect you
properly during an accident. Take the
following precautions:
[Always wear your seat belt and sit
properly in your seat.
[ Do not use the seat belt if it is loose
or twisted. A loose or twisted seat
belt will not protect you properly in
an accident.
[ Do not place anything near the
buckle. This may adversely affect
the buckle and cause it to function
improperly.
[ Always replace your pre-tensioners
after activation or an accident.
[ NEVER inspect, service, repair
or replace the pre-tensioners by
yourself. This must be done by an
authorized HYUNDAI dealer.
[ Do not hit the seat belt assemblies.
WARNING
Do not touch the pre-tensioner seat
belt assemblies for several minutes
after they have been activated. When
the pre-tensioner seat belt mechanism
deploys during a collision, the pre-
tensioner can become hot and can burn
you.

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 61-70 ... 340 next >