HYUNDAI SANTA FE HYBRID 2023 Owners Manual

Page 501 of 623

Driver assistance system7-142
[ 'Agree' must be selected on the
infotainment system screen and the
infotainment system has to operate
properly to use Remote Operation
function.
[ Method (2) can be used after
thevehicle has been driven above
3mph (5 km/h).
[ If the function is turned on again
after parallel parking is completed
by Remote Smart Parking Assist,
Remote Operation function can be
used with Method (2).
2. Remotely moving forward and in
reverse
OTM070084L
(1) Press and hold one of the Forward () or Reverse () button on the
smart key. Remote Smart Parking
Assist will automatically control
the steering wheel, vehicle speed
and gearshift. The vehicle will
move in the direction of the button
pressed.
(2) While Remote Operation function is operating, if the you do not hold
down the Forward (
) or Reverse
() button, the vehicle will stop
and system control will pause. The
function will start operating again
when the button is pressed and
held again.
(3) When the vehicle reaches the target location, release the smart
key Forward or Backward button. (4) When the driver gets in the vehicle
with the smart key, a message
will appear informing the driver
Remote Operation function is
complete on the infotainment
system screen and the engine will
remain on.
In addition, when the Remote Start
(
) button is pressed on the smart
key from outside the vehicle, a
message will appear informing the
driver Remote Operation function
is complete and the engine will
turn off.
[ Check that all smart keys are
outside the vehicle when using
Remote Operation function.
[ Remote Operation function will
operate only when the smart key is
within 13 ft. (4 m) from the vehicle. If
there is no vehicle movement even
when the Forward or Backward
button is pressed on the smart key,
check the distance to the vehicle
and press the button again.
[ The detecting range of the smart
key may vary depending on the
surroundings that are affected by
radio waves such as transmission
tower, broadcast station, etc.
[ When remotely moving forward
using method (1), it is recognized
as an exit situation, and the
vehicle moves 13 ft. (4 m) to
check for pedestrians, animals or
objects around the vehicle. After
confirmation, the steering wheel
is controlled according to the
condition ahead.

Page 502 of 623

07
7-143
[When remotely moving forward
using method (2), it is recognized
as a parking situation, and will
immediately control the steering
wheel according to the condition
ahead to assist with entering the
parking space and aligning the
vehicle. However, performance
may reduce depending on the
pedestrians, animals, shape of
objects, location, etc., around the
vehicle.
[ For moving remotely in reverse,
both method (1) and (2) aligns the
steering wheel first, and then will
only move the vehicle straight.
[ When remotely moving forward or
in reverse is completed, the vehicle
will automatically shift to P (Park)
and engage EPB (Electronic Parking
Brake). CAUTION
[ When using Remote Operation
function, make sure that all
passengers have gotten out of the
vehicle.
[ If the vehicle’s battery is discharged
or Remote Smart Parking Assist
malfunctions when parked in a
narrow parking space, Remote
Operation function will not operate.
Always park your vehicle in a space
wide enough for you to get in or out
of your vehicle.
[ Please note that depending on the
parking space, you may not be able
to exit from the space you have
entered by using Remote Operation
function.
[ After parking, the surrounding may
change due to the movement of
surrounding vehicles. If this occurs,
Remote Operation function may not
operate.
[ Before leaving the vehicle, close
windows and sunroofs, and make
sure the engine is off before locking
the doors.
[ After parking, the surrounding may
change due to the movement of
surrounding vehicles. If this occurs,
Remote Operation function may not
operate.

Page 503 of 623

Driver assistance system7-144
Remote Operation function
operation status
Operation status Smart key LED Hazard
warning light
Under
contr
ol Green LED
continuously
blinks
-
Pause Red LED
continuously
blinks Blinks
Off Red LED
illuminates for
4 seconds and
then turns off Blinks 3
times and
turns off
Complete Green LED
illuminates for
4 seconds and
then turns off Blinks 1
time and
turns off

à Operation status by the hazard
warning light may not be applicable
based on the regulation of your
country.

à If the smart key is not within the
operating range from the vehicle
(approximately 13 ft. (4 m)), the
smart key LED will not illuminate or
blink. Use the smart key within the
operating range.
How to turn off Remote Operation
function while operating
[Press the Parking/View () button
while the infotainment system screen
guides the driver using method 2.
[ Shift the gear except to P (Park)
while the infotainment system screen
guides the driver using method 2.
[ Press the Parking Safety (
) button
RUVHOHFWS&DQFHOTRQWKHLQIRWDLQPHQW
system screen.
[ Press the Remote Start (
) button
on the smart key while the vehicle is
being controlled by Remote Operation
function. Remote Operation function
will turn off. At this time, the engine
will turn off.
[ Get on the vehicle with the smart key.
Remote Operation function will turn
off. At this time, the engine will remain
on.
The function will pause in the
following conditions when:
[There is a pedestrian, animal or object
in the direction the vehicle is moving
[ The door or liftgate is open
[ The Forward (
) or Reverse ()
button is not continuously pressed
[ Simultaneously pressing multiple
buttons on a smart key
[ The smart key is not operated within
13 ft. (4 m) from the vehicle
[ Button of another smart key is pressed
in addition to the operating smart key
[ Blind-Spot Collision-Avoidance
Assist or Rear Cross-Traffic Collision-
Avoidance Assist operates while the
vehicle is being controlled in the
reverse direction.

Page 504 of 623

07
7-145
[The vehicle moves 22 ft. (7 m) while
the smart key is pressed with Remote
Operation function (maximum travel
distance per button press)
When Remote Operation function is
paused, the vehicle will stop. If the
condition that made the function to
pause disappears, the function may
operate again.
The function will cancel in the
following conditions when:
[ The steering wheel is steered
[ The gear is shifted while the vehicle is
moving
[ Operating EPB while the vehicle is
moving
[ The engine hood is open
[ The brake pedal or accelerator pedal
is depressed when all the doors are
closed
[ The smart key is outside the vehicle
when the brake pedal is depressed
while the driver's door is open
[ Rapid acceleration occurs
[ Vehicle skid occurs
[ The wheel is stuck by an obstacle and
cannot move [
Approximately 3 minutes and 50
seconds have past after Remote
Operation function has started to
operate
[ The slope of the road exceeds the
operational range
[ The function is paused for more than
1 minute
[ The total travel distance of the vehicle
has exceeded 45 ft. (14 m) after
Remote Operation function operation
[ The steering wheel, gearshift, braking,
and drive controls are not working
normally
[ There is a problem with the smart key
or the smart key battery is low
[ ABS, TCS or ESC system operates due
to slippery road conditions
[ The alarm of the Theft Alarm System
sounds
When Remote Operation function is
canceled, the vehicle will automatically
stop, shift the gear to P (Park) and
engage EPB (Electronic Parking Brake).

Page 505 of 623

Driver assistance system7-146
Remote Smart Parking Assist
Malfunction and Limitations
Remote Smart Parking Assist
malfunction
OTM070222L
Remote Smart Parking Assist check
When Remote Smart Parking Assist is
no
t working properly, the ‘Check Parking
$VVLVWTZDUQLQJPHVVDJHZLOODSSHDU
on the infotainment system screen.
If the message appears, stop using
Remote Smart Parking Assist, and have
the vehicle inspected by an authorized
HYUNDAI dealer.
OJX1079200L
Remote Smart Parking Assist canceled
When Remote Parking Assist is
oper
ating, the function can be canceled,
DQGWKHS3DUNLQJ$VVLVW&DQFHOHGT
warning message may appear regardless
of the parking order. Other messages
may appear depending on the situations.
Follow the instructions provided on
the infotainment system screen while
parking your vehicle with Remote
Parking Assist. Always look around and
pay attention when using Remote Smart
Parking Assist.

Page 506 of 623

07
7-147
OTM070221L
Remote Smart Parking Assist standby
When ‘Parking Assist Conditions Not
0
HWTPHVVDJHDSSHDUVZKHQ3DUNLQJ
View (
) button has been pressed and
held, Remote Smart Parking Assist is in
standby. After a while, press and hold the
Parking/View (
) button again to see if
Remote Smart Parking Assist works.
The message appears even when the
smart key's battery is low. Check the
smart key battery level.
Limitations of Remote Smart Parking
Assist
In the following circumstances, Remote
Smart Parking Assist performance to
park or exit the vehicle may be limited,
there may be a risk of collision, or
Remote Smart Parking Assist may turn
off. Park or exit the vehicle manually if
necessary.
[ An object is attached to the steering
wheel
[ The vehicle is installed with a snow
chain, spare tire or different size
wheel
[ Tire pressure is lower or higher than
the standard tire pressure
[ Your vehicle is loaded with cargo
longer or wider than your vehicle or a
trailer is connected to your vehicle
[ There is a problem with the wheel
alignment
[ Your vehicle is leaned severely to one
side
[ Your vehicle is equipped with a trailer
hitch
[ The license plate is installed
differently from the original location
[ There is a person, animal or object
above or below the ultrasonic sensor
when Remote Smart Parking Assist is
activated
[ The parking space is curved or
diagonal
[ There is an obstacle such as a person,
animal or object (trash can, bicycle,
motorcycle, shopping cart, narrow
pillar etc.) near the parking space

Page 507 of 623

Driver assistance system7-148
[ There is a circular pillar or narrow
pillar, or a pillar surrounded by objects
such as fire extinguisher, etc., near the
parking space
[ The road surface is bumpy (curbstone,
speed bump, etc.)
[ The road is slippery
[ The parking space is near a vehicle
with higher ground clearance or big,
such as a truck, etc.
[ The parking space is Inclined
[ There is Remote Smart Parking Assist
[ Operating the system on uneven
roads, gravel roads, bushes, etc.
[ The performance of the ultrasonic
sensor is affected by extremely hot or
cold weather
[ The ultrasonic sensor is covered with
snow or water
[ An object that generates ultrasonic
waves is nearby
[ A wireless device with a transmission
function operates near the ultrasonic
sensors
[ Your vehicle is affected by another
YHKLFOHTV3DUNLQJ'LVWDQFH:DUQLQJ
[ The sensor is mounted or positioned
incorrectly by an impact to the
bumper
[ When the ultrasonic sensor cannot
detect the following objects:

- Sharp or slim objects, such as ropes,
chains or small poles
- Objects smaller than 10 in. (100 cm) in length and narrower than 6 in. (14
cm) in diameter
- Objects which tend to absorb sensor frequency, such as clothes,
spongy material or snow
- A narrow object such as a corner of a square pillar
- Person, animal or object near the ultrasonic sensor Remote Smart Parking Assist may not
operate normally under the following
circumstances:
[
Parking on inclines
OTMH070006
Park manually when parking on
inclines.
[ Parking on uneven road
OTMH070007
Remote Smart Parking Assist may
cancel when the vehicle slips, or
the vehicle cannot move due to
road conditions such as pebbles or
fragmented stones.

Page 508 of 623

07
7-149
[Parking behind a truck
OTMH070008
Do not use Remote Smart Parking
Assist around vehicles with higher
ground clearance, such as a bus,
truck, etc. It may lead to an accident.
[ Parking near a pillar
OTMH070009
Remote Smart Parking Assist
performance may reduce or collision
with an obstacle may occur when
there is a narrow object, circular pillar,
square pillar, or a pillar surrounded
by objects such as a fire extinguisher,
etc., near the parking space. The
driver should park the vehicle
manually. [
Parking in a parking space with a
vehicle on one side only
OJX1079049
If Remote Smart Parking Assist is
used, when parking in a parking space
with a vehicle only on one side, your
vehicle may cross the parking line to
avoid the parked vehicle.
[ Parking diagonal
OTM070133
Remote Smart Parking Assist does not
provide diagonal parking. Even if your
vehicle was able to enter the parking
space, do not use Remote Smart
Parking Assist because the function
cannot operate properly.

Page 509 of 623

Driver assistance system7-150
[ Parking in snow
OTMH070010
Snow may interfere with sensor
operation, or Remote Smart Parking
Assist may cancel if the road is
slippery while parking.
WARNING
Take the following precautions when
using Remote Smart Parking Assist:
[The driver is responsible for safe
parking and exit when using Remote
Smart Parking Assist. Make sure
there are no pedestrians, animals
or objects around the vehicle when
using the function.
[ When using Remote Smart Parking
Assist, stay out of the way in the
direction the vehicle moves for your
safety.
[ Always check surroundings when
using Remote Smart Parking Assist.
You may collide with pedestrians,
animals, or objects if they are near
the sensor or are in the sensor’s blind
spot area.
[ A collision may occur if a pedestrian,
animal, or object suddenly appears
while Remote Smart Parking Assist is
operating.
[Do not use Remote Smart Parking
Assist when under the influence of
alcohol.
[ Do not let children or other people to
use the smart key.
[ If Remote Smart Parking Assist is
used continuously for a long period,
it may adversely affect system
performance.
[ Remote Smart Parking Assist may
not operate normally if the vehicle
needs wheel alignment adjustment
such as when the vehicle tilts to one
side. The vehicle be checked by an
authorized HYUNDAI dealer.
[ Noise may be heard when braking
occurs by Remote Smart Parking
Assist or when the brake pedal is
depressed by the driver.
[ Remote Smart Parking Assist may
suddenly apply the brake to avoid
collision.
[ Use Remote Smart Parking Assist
only in a parking space that is large
enough for the vehicle to move
safely.
NOTICE
[If the 3rd stage warning (continuous
beep) of the Forward/Reverse
Parking Distance Warning sounds
while Remote Smart Parking
Assist is operating, it means the
obstacle detected is close to your
vehicle. At this time, Remote Smart
Parking Assist will temporarily stop
operating. Make sure there are no
pedestrians, animals, or objects
around your vehicle.
[ If the vehicle is remotely started that
has been parked in cold weather for
a long time, the operation of Remote
Smart Parking function may be
delayed or canceled depending on
vehicle condition.

Page 510 of 623

07
7-151

- For USA
OANATEL125
- For Canada
OANATEL126
'(&/$5$7,212)&21)250,7<
Front Radar
The radio frequency components (RearCorner Radar) complies:

Page:   < prev 1-10 ... 461-470 471-480 481-490 491-500 501-510 511-520 521-530 531-540 541-550 ... 630 next >