bluetooth Hyundai Sonata 2016 Car Multimedia System Manual

Page 25 of 308

FM/AM
HD Radio™ Technology SiriusXM™ Media
About Disc CD
MP3
USB
iPod AUX
Bluetooth
® Audio
My Music
part.2 AV
02
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 53 of 308

USB I 2-29
02
FeaturesDescription
Current File
Displays current playing file name
Back ButtonConverts to basic mode screen
MenuNow Playing : When moving to a different list
screen, moves to the list page where the current
file is located (Becomes disabled when the cur-
rent list includes the current file)
SEEK/TRACK Controls background mode


Radio mode : Changes Frequency and
Channel


Media mode : Changes Track (excluding AUX)
TUNE
Controls background mode


Radio mode : Changes Frequency and
Channel


Media mode : Changes track (excluding AUX,
Bluetooth Audio).


If a desired track is displayed, press the knob
to move to the track.
If the 
TUNE knob is not pressed within 5
seconds of searching tracks, the track info for
the current track is restored.
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 54 of 308

2-30 I AV
iPod
Using iPod Devices


iPod is a registered trademark of Apple Inc.


iPod mode will not operate if the con-
nected iPod cannot be recognized due
to operation of unsupported versions
that do not support related protocols,
iPod abnormalities, or iPod device
defects. Some iPods with unsupported
communication protocols may not prop-
erly operate with the Multimedia system.


For fifth generation iPod Nano devices,
the iPod may not be recognized when
the battery level is low. Please charge
the iPod for use.


Search/play orders shown within the
iPod device may differ with the orders
shown within the Multimedia system.


If the iPod malfunctions due to an iPod
device defect, reset the iPod and try
again. (To learn more, refer to your iPod
manual)

If repeatedly connect and disconnect
iPod/iPhone to the Multimedia system
with USB cable in short time, it may
cause abnormal operation.


The time for recognition of iPod/iPhone
may vary depending on device type,
firmware version and iOS version.


For some iPod Touch and iPhone
devices, connecting Bluetooth
® while the
iPod is operating may result in discon-
tinued iPod sound. When such devices
with Bluetooth
® support are connected,
this problem occurs as the sound source
is changed from the Dock Connector
(USB connector cable) to Bluetooth.


To prevent this symptom, Bluetooth
Audio function in the Multimedia system
is limited if iPod/iPhone is connected
to the system through both cable and
Bluetooth. To listen to the iPod sound,
use either iPod menu with USB connec-
tion or Bluetooth Audio with Bluetooth
connection.

To listen to the iPod sound, reconnect
the USB cable or change the audio out-
put settings in iPod/iPhone to Dock.


In order to use the iPod while operating
the keys, you must use a dedicated iPod
cable. (the cable that is supplied when
purchasing iPod/ iPhone products)
œ During ACC ON state, connecting the
iPod through the iPod cable (The cable
that is supplied when purchasing iPod/
iPhone product.) will charge the iPod
through the head unit.
œ
The use of genuine iPod cables sup- The use of genuine iPod cables sup-
plied by Apple is recommended. (The plied by Apple is recommended. (The
use of other products may result in use of other products may result in
noise or abnormal operation.)noise or abnormal operation.)
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 57 of 308

iPod I 2-33
02
Caution


If the iPhone/iPod Touch supports
Bluetooth, it is unable to use Bluetooth
Audio if the Apple device that is con-
nected to the Multimedia system
through both USB connection and
Bluetooth. Disconnect the USB connec-
tion then use Bluetooth Audio


If iPod/iPhone connected to the
Multimedia system through both USB
and AUX. iPod/iPhone keeps output
sound via AUX, thus it may occur sound
will not output in iPod mode.


If AUX cable connected to iPod/iPhone
but not connect to the Multimedia sys-
tem, it may occur sound will not output
in iPod mode due to iPod/iPhone’s fea-
ture. Especially, if you use AUX cable
like pictures, this problem may occur.


Disconnect AUX cable from iPod/iPhone
first, then connect to the Multimedia
system via USB. Or change settings to
“Dock” in iPod/iPhone.

If connect to the Multimedia system
while podcast or iTunes music down-
loading to iPod/iPhone, it may occur
some problems when you select song
in the list. Reconnect iPod/iPhone to the
Multimedia system when downloading
is finished or the file deleted.


If connect to the Multimedia system
while sync, it may occur some problems.
Try to use iPod/iPhone connection after
sync complete. (To learn more, refer to
your iPod manual)


iPhone and iPod Touch devices are
guaranteed to work normally on iOS
7.0.6 or below. However, they may not
work normally on future iOS versions
as their operations have not yet been
tested.
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 62 of 308

2-38 I AV
FeaturesDescription
Mode
Displays current operating mode
Phone Name Displays name of connected phone
Artist InfoName of current artist
TitleName of current song
Previous
File

If play time is less than 3 seconds, moves to
the previous file


If play time is over than 3 seconds, plays the
current file from the beginning
This function may differ depending on the
model of mobile phone
Play/Pause Plays/Pauses Bluetooth Audio
Next FileMoves to the next file
ConnectionsMoves to the Bluetooth Settings screen. You
can pair a new device or change/delete paired
device(s)
SoundHound
Runs the SoundHound feature.
For more detailed feature, please refer to
SoundHound section in Info part.
SEEK/TRACK
Plays the previous/next file
TUNE TUNE is not supported.
Bluetooth® Audio
Bluetooth Audio Mode
i Information
Artist info and Title may not be supported by mobile phone
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 63 of 308

Bluetooth Õ Audio I 2-39
02
Bluetooth Connections
Settings
Settings for pairing, connection and dis-
connection of a Bluetooth device


In Bluetooth Audio play screen, Select
Connections


Select SETUP key in the head unit. ▶

Select
Phone. ▶
Select Bluetooth connection
i Information
If the music in the mobile phone is not played
after changing to audio streaming mode,
press the pla
y button. Thus check if the
music is playing in the Bluetooth device after
changing to audio streaming mode. Audio
streaming may not be supported for some
mobile phones.
Please check the Bluetooth compatibility in
belo w w
ebsite :

HYUNDAI Motor America
https://www.hyundaiusa.com/bluetooth
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 67 of 308

Before Using the Bluetooth® Handsfree
Bluetooth Connection Bluetooth Phone
part.3 Bluetooth
03
)@-'.:@(<64"@/>1BSUJOEE
)@-'.:@(<64"@/>1BSUJOEE 

Page 68 of 308

3-2 I Bluetooth
Before Using the Bluetooth®
Handsfree
What is Bluetooth®
Wireless Technology?


Bluetooth® Wireless Technology refers
to a short-distance wireless network-
ing technology which uses a 2.45GHz
frequency to connect various devices
within a certain distance.


Supported within PCs, external devices,
Bluetooth
® phones, PDAs, various elec-
tronic devices, and automotive environ-
ments,
Bluetooth® Wireless Technology
to be transmitted at high speeds without
having to use a connector cable.


Bluetooth
® Handsfree refers to a device
which allows the user to conveniently
make phone calls with Bluetooth
®
mobile phones through the Multimedia
system.

The Bluetooth
® Handsfree feature may
not be supported in some mobile phones.
For more information on mobile phone
compatibility, visit the HYUNDAI website
- HYUNDAI Motor America : https://www.
hyundaiusa.com/bluetoothPrecautions for Safe Driving


Bluetooth® Handsfree is a feature that
enables drivers to practice safe driv-
ing. Connecting the head unit with a
Bluetooth
® phone allows the user to
conveniently make calls, receive calls,
and manage the phone book. Before
using
Bluetooth® Wireless Technology,
carefully read the contents of this user’s
manual.


Excessive use or operations while driv-
ing may lead to negligent driving prac-
tices and be the cause of accidents. Do
not operate the device excessively while
driving.


Viewing the screen for prolonged peri-Viewing the screen for prolonged peri-
ods of time is dangerous and may lead ods of time is dangerous and may lead
to accidents. When driving, view the to accidents. When driving, view the
screen only for short periods of time.screen only for short periods of time.
Bluetooth
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 69 of 308

Before Using the Bluetooth Õ Handsfree I 3-3
03
CAUTIONS upon Connecting
Bluetooth® Phone


Before connecting the head unit with
the mobile phone, check to see that the
mobile phone supports Bluetooth
® fea-
tures


Even if the phone supports
Bluetooth®
Wireless Technology, the phone will
not be found during device searches if
the phone has been set to hidden state
or the Bluetooth
® power is turned off.
Disable the hidden state or turn on the
Bluetooth
® power prior to searching/
connecting with the head unit.


If Auto Connection is used, the
Bluetooth
® phone is automatically con-
nected when the ignition is turned on,
making it unnecessary to have to con-
nect the phone with the head unit every
time.

If you do not want automatic connection
with your Bluetooth
® device, turn the
Bluetooth® feature off of the Bluetooth®
device.


Park the vehicle when connecting the
head unit with the mobile phone.


Bluetooth
® connection may become
intermittently disconnected in some
mobile phones. Follow these steps to
try again.
1. Turn the Bluetooth
® function within
the mobile phone OFF/ON and try
again.
2. Turn the mobile phone power OFF/
ON and try again.
3. Completely remove the mobile
phone battery, reboot, and then
again.
4. Reboot the Multimedia System and
try again.
5. Delete all paired devices from both
of Phone and Head Unit sides and
then try again

The Handsfree call volume and quality
may differ depending on the mobile
phone.


Pairing Bluetooth
® devices and use of
other Bluetooth® features are not sup-
ported when the vehicle is in motion. For
safety, please first park your vehicle.


When downloading contacts, is not
functioning and is not described within
this user’s manual it may be related with
the mobile device. When that occurs,
inquire within the mobile phone manu-
facturer.

)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 70 of 308

3-4 I Bluetooth
Bluetooth Connection
Pairing a New Device
Before you can use the Bluetooth feature,
you must first pair/connect your mobile
phone to your car.
Up to 5 Bluetooth devices can be paired.
Only one Bluetooth device can be con-
nected at a time.
Pairing a New Device by Selecting
Phone/Call
Select PHONE key in the head unit or
key in the steering wheel remote
control. ▶
Select
Yes . ▶
Pair your car
after your mobile phone detects the
Bluetooth device. ▶
Enter the passkey or
accept the authorization popup. ▶

Connect Bluetooth.
Pairing a New Device Through the
Phone Settings
Select SETUP key in the head unit. ▶

Select
Phone. ▶
Select Bluetooth Connection.
▶ Select
Add New. ▶
Pair your car after
your mobile phone detects the Bluetooth
device. ▶
Enter the passkey or accept the
authorization popup. ▶
Connect Bluetooth.
The default passkey is 0000.
The device name above is an example.
Check the actual information on the product.
Connecting Bluetooth Devices
Connects the Bluetooth devices that you
add.
Connecting Devices by Selecting
Phone/Call
Select PHONE key in the head unit or
key in the steering wheel remote
control. ▶
Select the name of the device
to connect. ▶
Connect Bluetooth.
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 70 next >