display INFINITI FX35 2005 Service Manual

AV-100
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
“EDIT ADDRESS BOOK” MODE

Edit the items registered in Address Book.
“GPS INFORMATION” MODE

Latitude, longitude, altitude, receiving state (telemetry), and sat-
ellite location are displayed as GPS information.
NOTE:
Altitude is displayed only in three–dimensional status.
“QUICK STOP CUSTOMER SETTING” MODE

Select a category for the “Quick Stop” menu.
“SET AVERAGE SPEED” MODE

Set the average vehicle speed to calibrate the estimated journey
time for the destination.

Set three items; “Freeway”, “Main Roads”, and “Ordinary
Roads”.
SKIA3511E
SKIA0555E
SKIA5996E
SKIA0565E

NAVIGATION SYSTEM AV-101
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
“TRACKING” MODE

To delete the tracking marks on the map, select “Off”.

To leave the tracking marks on the map, select “On”.
NOTE:
When a trail display is turned OFF, trail data is erased from the mem-
ory.
GUIDANCE VOLUME
Description
Following guidance volume setting can be changed.
Activation/Deactivation Setting

The voice prompt can be turned on/off by pressing the “Guidance Volume” button.
Voice Volume Setting

Volume of the voice can be controlled by bending the joystick to left/right.
DISPLAY WITH PUSHED “TRIP” BUTTON

When the “TRIP” button is pushed, the following models will display on the screen.

Warning message (if there are any) →TRIP1 →TRIP2 →FUEL ECONOMY →MAINTENANCE →OFF.
SKIA0559E
SKIA4497E
Display items Display/Setting contents Reference
page
Trip 1 o r Trip2 Elapsed Time Displays driving time with a range of 0000:00:00 to 9999:59:59.
AV-102,
"TRIP 1 OR
TRIP 2"
Driving Distance
[(km) or (miles)] Displays driving distance with a range of 00000.0 to 99999.9.
Average speed
[(km/h) or (MPH)] Displays average speed with a range of 000.0 to 999.9.
Fuel Economy Average Fuel Economy
[(MPG) or (l/100km)] Displays fuel economy with ignition switch ON, average fuel econ-
omy each 30 minutes. AV-102,
"FUEL
ECONOMY"
Distance to Empty [(km) or
(miles)], [(MPG) or (l/100km)] Displays possible driving distance with remaining fuel.
Fuel Economy (MPG) Displays fuel economy each approx. 100 ms.
Maintenance Engine oil Maintenance intervals of engine oil and setting of oil change cycle.
AV-102,
"MAINTE-
NANCE"
Tire rotation Maintenance intervals of tire and setting of tire replacement cycle.
Tire pressure Tire pressure displayed as tire pressure information.

AV-102
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
TRIP 1 OR TRIP 2

Elapsed Time, Driving Distance and Average Speed are dis-
played as Trip 1 information or Trip 2 information.

The way to reset is by pushing the “Reset” switch or by keeping
pushing “TRIP” button more than 1.5 seconds.
FUEL ECONOMY

Average Fuel Economy, Distance to Empty, Fuel Economy are
displayed as Fuel Economy information.

The way to reset is by pushing the “Reset” switch or by keeping
pushing “TRIP” button more than 1.5 seconds.
MAINTENANCE

Engine Oil, Tire Rotation and Tire Pressure are displayed as
Maintenance information.
ENGINE OIL OR TIRE ROTATION

Possible to set up interval of engine oil and tire rotation by mov-
ing joystick right and left.
SKIA5990E
SKIA5991E
SKIA5992E
SKIA5993E

NAVIGATION SYSTEM AV-103
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
TIRE PRESSURE

Pressure indication in psi on the screen indicates that the
pressure is being measured. After a few driving trips, the pres-
sures for all four tires will be displayed.

The order of tire pressure figures displayed on the screen does
not correspond with the actual order of the tire position.

Tire pressure rises and falls depending on the heat caused by
the vehicle's traveling condition and the temperature.

FLAT TIRE–very low tire air pressure.
NOTE:

In a case of FLAT TIRE pressure, interrupt screen is not shown
on the display.

On the screen of TIRE PRESSURE, “FLAT TIRE”, “Check”, “All tire” is displayed.
WARNING INDICATIONS
Warning signal (door switch signal) is received from BCM through
CAN communication line.
SKIA5994E
SKIA5995E
Warning
indicators Warning lamps in
instrument panel Warning detection and cancel conditions
Cases of
malfunction
DOOR OPEN Door Detection condition
Vehicle is running [approx. 5km/h (3 MPH) or faster]
and door ajar of any of the doors is detected. Door is open.
Cancel condition Vehicle is stopped and all the doors lock.

NAVIGATION SYSTEM AV-119
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
Terminals and Reference Value for NAVI Control UnitAKS007IV
Terminal No.
(Wire color) Item Signal
input/
output Condition
Voltag e Example of
symptom
+– Ignition
switch Operation
1 (B) Ground Ground — ON — Approx. 0 V —
2 (Y) Ground Battery power
supply Input OFF — Battery voltage System does not
work properly.
3 (Y)
4 (B) Ground Ground — ON — Approx. 0 V —
6 (LG) Ground ACC power
supply Input ACC — Battery voltage System does not
work properly.
7 (LG) 8 (PU) Voice guide sig-
nal Output ON Press the “GUIDE/
VOICE” button. Only route guide
and operation
guide are not
heard.
9 — Shield ground — — — — —
14 — Shield ground — — — — —
15 (B) 17 RGB signal
(B: blue) Output ON Select “Display
Diagnosis (NAVI)” of
CONFIRMATION/
ADJUSTMENT
function. RGB screen
looks yellowish.
16 (G) 14 RGB synchro-
nizing signal Output ON
Press the “MAP”
button. RGB screen is
rolling.
17 — Shield ground — — — — —
18 (R) 17 RGB signal
(R: red) Output ON Select “Display
Diagnosis (NAVI)” of
CONFIRMATION/
ADJUSTMENT
function. RGB screen
looks bluish.
21 (W) 17 RGB signal
(G: green) Output ON Select “Display
Diagnosis (NAVI)” of
CONFIRMATION/
ADJUSTMENT
function. RGB screen
looks reddish.
25 (R) Ground Illumination sig-
nal Input OFF Lighting switch posi-
tion 1st or 2nd Approx. 12 V
Night illumina-
tion for switches
does not illumi-
nate.
Lighting switch posi-
tion OFF Approx. 0 V
SKIA0171J
SKIA4979E
SKIA0164E
SKIA4977E
SKIA4978E

NAVIGATION SYSTEM AV-121
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
Terminals and Reference Value for Display Control UnitAKS007IW
Terminal No.
(Wire color) Item Signal
input/
output Condition
Voltage Example of
symptom
+– Ignition
switch Operation
1 (W/L) Ground Battery Power
supply Input OFF — Battery voltage System does not
work properly.
2 (W/G) Ground Power Sup-
ply (Inverter) Output ON — Approx. 9 V Screen is not
shown.
3 (B) Ground Ground — ON — Approx. 0 V —
4 (BR/W) Ground Power Sup-
ply (Signal) Output ON — Approx. 9 V
Screen is not
shown.
5 (P) Ground (Inverter)
Ground — ON — Approx. 0 V —
6 (OR) Ground Reverse
signal Input ON Selector lever in R
position Approx. 12 V
Impossible to
gain direction of
vehicle.
Selector lever not
in R position Approx. 0 V
7 (P/L) Ground (Signal)
Ground — ON — Approx. 0 V —
10 (LG/R) Ground ACC power
supply Input ACC — Battery voltage System does not
work properly.
12 (G/R) Ground Ignition signal Input ON — Battery voltage A/C operation is
not possible.
Vehicle informa-
tion setting is not
possible.
13 (B) Ground Sysco — ON — Approx. 0 V —
14 (R/L) Ground Illumination
signal Input OFF Lighting switch
position 1st or 2nd Approx. 12 V Audio unit illumi-
nation does not
come on when
lighting switch is
ON (position 1).
Lighting switch
position OFF Approx. 0 V
16 (R/G) Ground Vehicle speed
signal (8–
pulse) Input ON When vehicle
speed is approx.
40 km/h (25 MPH) Value of vehicle
information is
not accurately
displayed.
25 (L) — CAN H — — — — —
26 (R) — CAN L — — — — —
28 (B/R) Ground Communica-
tion signal (+) Input/
Output ON —
System does not
work properly.
29 — Shield ground — — — — —
PKIA1935E
SKIA0175E

AV-122
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
30 (W/R) Ground Communica-
tion signal (–) Input/
output ON — System does not
work properly.
32 (BR) Ground Communica-
tion signal (+) Input/
output ON — System does not
work properly.
33 — Shield ground — — — — —
34 (Y) Ground Communica-
tion signal (–) Input/
output ON — System does not
work properly.
36 (PU) Ground Display Com-
munication
signal
(DCU-DSP) Output ON
Press the “TRIP”
button. Though a screen
is displayed, it is
impossible to
adjust bright-
ness.
37 — Shield ground — — — — —
38 (LG) Ground Display Com-
munication
signal
(DSP-DCU) Input ON
Press the “TRIP”
button. Though a screen
is displayed, it is
impossible to
adjust bright-
ness.
39 — Shield ground — — — — —
40 (LG) Ground Audio
Communica-
tion signal Output ON
Operate audio
volume. Audio dose not
operate properly.
41 — Shield ground — — — — — Terminal No.
(Wire color) Item Signal
input/
output Condition
Voltag e Example of
symptom
+– Ignition
switch Operation
SKIA0176E
SKIA0175E
SKIA0176E
SKIA4364E
SKIA4363E
SKIA4403E

NAVIGATION SYSTEM AV-123
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
42 (B/Y) Ground Audio
communica-
tion signal Input ON
Operate audio
volume. Audio dose not
operate properly.
43 (G/B) 41 RGB synchro-
nizing signal Input ON Press the “MAP”
button. RGB screen is
rolling.
44 (R/W) 45 RGB signal
(R: red) Input ON Select “Display
Diagnosis (NAVI)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks bluish.
45 — Shield ground — — — — —
46 (R/L) 45 RGB signal
(G: green) Input ON Select “Display
Diagnosis (NAVI)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks reddish.
47 — Shield ground — — — — —
48 (B) 45 RGB signal
(B: blue) Input ON Select “Display
Diagnosis (NAVI)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks yellowish.
49 — Shield ground — — — — —
50 (L/R) 47 RGB signal
(R: red) Output ON Select “Display
Diagnosis (DCU)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks bluish.
Terminal No.
(Wire color) Item Signal
input/
output Condition
Voltage Example of
symptom
+– Ignition
switch Operation
SKIA4402E
SKIA0164E
SKIA4977E
SKIA4978E
SKIA4979E
SKIA4980E

AV-124
NAVIGATION SYSTEM
Revision: 2005 July 2005 FX
51 (B) 49 RGB area
(YS) signal Output ON Press the“TRIP”
button. RGB screen is
not shown.
52 (L/W) 47 RGB signal
(G: green) Output ON Select “Display
Diagnosis (DCU)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks reddish.
53 (W) 49 Vertical syn-
chronizing
(VP) signal Input ON
Selector lever in
R position. Rear view moni-
tor screen is roll-
ing.
54 (L) 47 RGB signal
(B: blue) Output ON Select “Display
Diagnosis (DCU)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks yellowish.
55 (R) 49 Horizontal
synchroniz-
ing (HP) sig-
nal Input ON —
RGB screen is
not shown.
56 (G) 49 RGB synchro-
nizing signal Output ON Press the “TRIP”
button. RGB screen is
rolling.
Terminal No.
(Wire color) Item Signal
input/
output Condition
Voltag e Example of
symptom
+– Ignition
switch Operation
SKIA0162E
SKIA4981E
SKIA0161E
SKIA4982E
SKIA4983E
SKIA0164E

NAVIGATION SYSTEM AV-125
C
D E
F
G H
I
J
L
M A
B
AV
Revision: 2005 July 2005 FX
Terminals and Reference Value for DisplayAKS007IX
Terminal No.
(Wire color) Item Signal
input/
output Condition
Voltage Example of
symptom
+– Ignition
switch Operation
1 (B) Ground Ground — ON — Approx. 0 V —
2 (W/G) Ground Power supply
(Inverter) Input ON — Approx. 9 V Screen is not
shown.
3 (BR/W) Ground Power supply
(Signal) Input ON — Approx. 9 V Screen is not
shown.
6 (L/W) 7 RGB signal
(G: green) Input ON Select “Display
Diagnosis (DCU)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks reddish.
7 — Shield ground — — — — —
8 (R) 21 Horizontal syn-
chronizing (HP)
signal Output ON —
RGB screen
is not shown.
9 (B) 21 RGB area (YS)
signal Input ON Press the “TRIP”
button. RGB screen
is not shown.
11 ( P U ) 2 3 Display communi-
cation signal
(DCU-DSP) Input ON — Though a
screen is dis-
played, it is
impossible to
adjust bright-
ness.
13 (P) Ground (Inverter) Ground — ON — Approx. 0 V —
14 (P/L) Ground (Signal) Ground — ON — Approx. 0 V —
17 (L/R) 7 RGB signal
(R: red) Input ON Select “Display
Diagnosis (DCU)”
of CONFIRMA-
TION/ADJUST-
MENT function. RGB screen
looks bluish.
SKIA4981E
SKIA4983E
SKIA0162E
SKIA4364E
SKIA4980E