reset INFINITI G37 2012 Owners Manual

Black plate (16,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]0-10 Illustrated table of contents GUID-6A5E5003-C9B2-4452-B103-DD9F44DAD191
SIC4683
1. Vehicle Dynamic Control (VDC) OFF
switch (P.5-55)
2. Trunk lid release switch (P.3-19)
3. Sonar system off switch (if so
equipped) (P.5-50) 4. Instrument brightness control switch
(P.2-38)
5. TRIP/RESET switch for twin trip od-
ometer (P.2-7)
6. Headlight, fog light and turn signal
switch (P.2-34) 7. Paddle shifter (if so equipped) (P.5-16)
8. Steering-wheel-mounted controls (left
side)
— ENTER or tuning switch (P.4-87)
— BACK switch (P.4-87)
— TALK switch (if so equipped)
(P.4-114)/Phone switch (if so
equipped) (P.4-90)
— Volume control switches (P.4-87)
— Source select switch (P.4-87)
9. Trip computer switch (P.2-26)
10. Windshield wiper and washer switch
(P.2-31)
11. Steering-wheel-mounted controls
(right side)
— Cruise control switches (P.5-21)
— Intelligent Cruise Control (ICC)
switches (if so equipped) (P.5-23)
12. Hood release handle (P.3-18)
13. Intelligent Key port (P.5-12)
14. Electric tilting/telescopic steering
wheel lever (if so equipped) (P.3-26)
15. Manual tilting/telescopic steering
wheel lever (if so equipped) (P.3-26)
16. Steering wheel
— Horn (P.2-40)
— Driver supplemental air bag
(P.1-41)COCKPIT

Black plate (25,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]FRONT SEATS GUID-D508833B-F102-47A6-A2B6-56CF07852D8B
Front power seat adjustment GUID-78261695-CA4C-40D0-8577-D5ACFE37E844
Operating tips: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
. The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 sec-
onds, then reactivate the switch.
. Do not operate the power seat switch
for a long period of time when the
engine is off. This will discharge the
battery.
See “ Automatic drive positioner ” (P.3-31)
for the seat position memory function (if so
equipped). SSS1051
Forward and backward: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Moving the switch
* 1
forward or backward
will slide the seat forward or backward to
the desired position.
Reclining: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Move the recline switch
* 2
backward until
the desired angle is obtained. To bring the
seatback forward again, move the switch
* 2
forward.
The reclining feature allows adjustment of
the seatback for occupants of different
sizes for added comfort and to help obtain
proper seat belt fit. (See “ Precautions on
seat belt usage ” (P.1-14).) Also, the seat- back can be reclined to allow occupants to
rest when the vehicle is parked.
Safety — Seats, seat belts and supplemental restraint system
1-3

Black plate (81,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]GUID-A9682D04-AAAB-465F-98B6-B6532C9F1362
SIC4683
1. Vehicle Dynamic Control (VDC) OFF
switch (P.5-55)
2. Trunk lid release switch (P.3-19)
3. Sonar system off switch (if so
equipped) (P.5-50) 4. Instrument brightness control switch
(P.2-38)
5. TRIP/RESET switch for twin trip od-
ometer (P.2-7)
6. Headlight, fog light and turn signal
switch (P.2-34) 7. Paddle shifter (if so equipped) (P.5-16)
8. Steering-wheel-mounted controls (left
side)
— ENTER or tuning switch (P.4-87)
— BACK switch (P.4-87)
— TALK switch (if so equipped)
(P.4-114)/Phone switch (if so
equipped) (P.4-90)
— Volume control switches (P.4-87)
— Source select switch (P.4-87)
9. Trip computer switch (P.2-26)
10. Windshield wiper and washer switch
(P.2-31)
11. Steering-wheel-mounted controls
(right side)
— Cruise control switches (P.5-21)
— Intelligent Cruise Control (ICC)
switches (if so equipped) (P.5-23)
12. Hood release handle (P.3-18)
13. Intelligent Key port (P.5-12)
14. Electric tilting/telescopic steering
wheel lever (if so equipped) (P.3-26)
15. Manual tilting/telescopic steering
wheel lever (if so equipped) (P.3-26)
16. Steering wheel
— Horn (P.2-40)
— Driver supplemental air bag
(P.1-41)
Instruments and controls
2-3COCKPIT

Black plate (85,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SIC4289
Speedometer
SPEEDOMETER AND ODOMETER GUID-88FF886D-55BB-496B-8011-CC5C82ACF75E
Speedometer GUID-87976F68-0541-4C72-B0C4-146B04F072C8
The speedometer indicates vehicle speed
in miles per hour (MPH) and kilometers per
hour (km/h). SIC3259
Odometer/twin trip odometer
Odometer/twin trip odometer GUID-5C08B138-E7A9-4EA6-BB29-75239C1D6187
The odometer
* 1
and twin trip odometer
* 2
are displayed on the dot matrix crystal
display when the ignition switch is in the
ON position.
The odometer records the total distance
the vehicle has been driven.
The twin trip odometer records the dis-
tance of individual trips.
Changing the display: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Pushing the TRIP A/B RESET switch
* 3
at
the bottom left of the combination meter
panel changes the display as follows: TRIP A ? TRIP B ? TRIP A
Resetting the trip odometer: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Pushing the TRIP A/B RESET switch
* 3
for
more than 1 second resets the trip
odometer to zero.
Average fuel economy and distance to
empty information is also available. (See
“ Dot matrix liquid crystal display ” (P.2-20)
and “ How to use STATUS button ” (P.4-9).)
Instruments and controls
2-7

Black plate (94,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-16 Instruments and controlsWARNING. If the light does not illuminate with the
ignition switch pushed ON, have the
vehicle checked by an INFINITI retailer as
soon as possible.
. If the light illuminates while driving,
avoid sudden steering maneuvers or
abrupt braking, reduce vehicle speed,
pull off the road to a safe location and
stop the vehicle as soon as possible.
Driving with under-inflated tires may
permanently damage the tires and in-
crease the likelihood of tire failure.
Serious vehicle damage could occur
and may lead to an accident and could
result in serious personal injury. Check
the tire pressure for all four tires. Adjust
the tire pressure to the recommended
COLD tire pressure shown on the Tire
and Loading Information label to turn
the low tire pressure warning light OFF. If
the light still illuminates while driving
after adjusting the tire pressure, a tire
may be flat. If you have a flat tire,
replace it with a spare tire as soon as
possible. . When a spare tire is mounted or a wheel
is replaced, the TPMS will not function
and the low tire pressure warning light
will flash for approximately 1 minute.
The light will remain on after the 1
minute. Contact your INFINITI retailer as
soon as possible for tire replacement
and/or system resetting.
. Replacing tires with those not originally
specified by INFINITI could affect the
proper operation of the TPMS.
CAUTION . The TPMS is not a substitute for the
regular tire pressure check. Be sure to
check the tire pressure regularly.
. If the vehicle is being driven at speeds of
less than 16 MPH (25 km/h), the TPMS
may not operate correctly.
. Be sure to install the specified size of
tires to the four wheels correctly.
Master warning light GUID-BFD238A1-B056-42EA-B9A0-FCCF2B17501F
When the ignition switch is in the ON
position, the master warning light illumi- nates if any of the following are displayed
on the dot matrix liquid crystal display:
. No key warning
. Low fuel warning
. Low washer fluid warning
. Parking brake release warning
. Door/trunk open warning
. Loose fuel cap warning
. Check tire pressure warning
See “ Dot matrix liquid crystal display ” (P.2-
20).
Preview Function warning light
(orange; if so equipped) GUID-B4E486C7-1748-4EBD-A37A-79C9F389E7E0
The light comes on if there is a malfunction
in the Brake Assist (with Preview Function)
system.
If the warning light comes on, park the
vehicle in a safe place. Turn the engine off,
restart the engine, resume driving and set
the ICC system again.
If it is not possible to set the system or the
indicator stays on, it may indicate that the
system is malfunctioning. Although the
vehicle is still driveable under normal
conditions, have the vehicle checked at
an INFINITI retailer.

Black plate (102,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-24 Instruments and controls18. Intelligent Cruise Control (ICC)
system MAIN switch indicator (if so
equipped) GUID-D9CC1D2D-CB35-47C6-91AE-D047809EAD42
The indicator is displayed when the In-
telligent Cruise Control (ICC) system main
switch is pushed. When the main switch is
pushed again, the indicator disappears.
While the main switch indicator is dis-
played, the ICC system is operational.
SIC3281INDICATORS FOR MAINTENANCE GUID-5EA9FA72-B4A3-457B-B214-AB899857C8F6
1. Engine oil replacement indicator GUID-9093AFD1-78A3-4D19-83A9-09CE6DADBB03
This indicator appears when the customer
set time comes for changing the engine oil.
You can set or reset the distance for
changing the engine oil. (See “ Trip compu-
ter ” (P.2-26).)
2. Oil filter replacement indicator GUID-F7238B25-6F5D-425C-B3DE-A16E7C387E58
This indicator appears when the customer
set time comes for replacing the oil filter.
You can set or reset the distance for
replacing the oil filter. (See “ Trip compu-
ter ” (P.2-26).)
3. Tire replacement indicator GUID-77B7A7D1-C9B1-4B0B-A034-325DDE961E03
This indicator appears when the customer
set distance comes for replacing tires. You
can set or reset the distance for replacing
tires. (See “ Trip computer ” (P.2-26).)
WARNING The tire replacement indicator is not a
substitute for regular tire checks, including
tire pressure checks. See “ Changing wheels
and tires ” (P.8-40). Many factors including
tire inflation, alignment, driving habits and

Black plate (103,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]road conditions affect tire wear and when
tires should be replaced. Setting the tire
replacement indicator for a certain driving
distance does not mean your tires will last
that long. Use the tire replacement indicator
as a guide only and always perform regular
tire checks. Failure to perform regular tire
checks, including tire pressure checks could
result in tire failure. Serious vehicle damage
could occur and may lead to a collision,
which could result in serious personal injury
or death.
4. “ OTHER ” indicator GUID-D62188FD-F0C6-498B-8B24-505D6E1D491D
This indicator appears when the customer
set time comes for replacing items other
than the engine oil, oil filter and tires. You
can set or reset the distance for replacing
the items. (See “ Trip computer ” (P.2-26).)
More maintenance reminders are also
available on the center display. (See
“ How to use INFO button ” (P.4-9).) SIC3282
Instruments and controls
2-25

Black plate (104,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]2-26 Instruments and controls SIC3264
TRIP COMPUTER GUID-FA55F5BE-A6B8-4E7E-AC55-ED2A35F5EAE6
Switches for the trip computer are located
on the right side of the combination meter
panel. To operate the trip computer, push
the side or front of the switches as shown
above.
* A
switch
* B
switch
When the ignition switch is pushed to the
ON position, modes of the trip computer
can be selected by pushing the
switch
* A
.
Each time the
switch
* A
is pushed, the
display will change as follows: Current fuel consumption ? Average fuel
consumption and speed ? Elapsed time
and trip odometer ? Distance to empty
(dte) ? Outside air temperature (ICY) ?
Setting ? Warning check
1. Current fuel consumption GUID-68872F59-1473-4975-A038-16336C4914A6
The current fuel consumption mode shows
the current fuel consumption.
2. Average fuel consumption (MPG
or l (liter)/100 km) and speed (MPH
or km/h) GUID-970652AF-3316-41FA-92BD-2EBCE8A3AE40
Fuel consumption: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The average fuel consumption mode shows
the average fuel consumption since the
last reset. Resetting is done by pushing the
switch
* B
for longer than 1 second.
(The average speed is also reset at the
same time.)
The display is updated every 30 seconds.
At about the first 1/3 mile (500 m) after a
reset, the display shows “——” .
Speed: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The average speed mode shows the
average vehicle speed since the last reset.
Resetting is done by pushing the
switch
* B
for longer than 1 second. (The average fuel consumption is also reset
at the same time.)
The display is updated every 30 seconds.
The first 30 seconds after a reset, the
display shows “——” .
3. Elapsed time and trip odometer
(mls or km) GUID-30877500-42E1-4C43-AC8D-A3CFB91E6B66
Elapsed time: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The elapsed time mode shows the time
since the last reset. The displayed time can
be reset by pushing the
switch
* B
for
longer than 1 second. (The trip odometer is
also reset at the same time.)
Trip odometer: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
The trip odometer mode shows the total
distance the vehicle has been driven since
the last reset. Resetting is done by pushing
the
switch
* B
for longer than 1
second. (The elapsed time is also reset at
the same time.)
4. Distance to empty (dte — mls or
km) GUID-B742AF0B-DD41-497D-AF93-CAE2072D2205
The distance to empty (dte) mode provides
you with an estimation of the distance that
can be driven before refueling. The dte is
constantly being calculated, based on the

Black plate (105,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]amount of fuel in the fuel tank and the
actual fuel consumption.
The display is updated every 30 seconds.
The dte mode includes a low range warning
feature. If the fuel level is low, the warning
is displayed on the screen.
When the fuel level drops even lower, the
dte display will change to “——” .
. If the amount of fuel added is small, the
display just before the ignition switch
is pushed to the OFF position may
continue to be displayed.
. When driving uphill or rounding curves,
the fuel in the tank shifts, which may
momentarily change the display.
5. Outside air temperature (ICY — 8 F
or 8 C) GUID-35621BA5-D61E-4ECD-9628-F300D193449A
The outside air temperature is displayed in
8 F or 8 C in the range of − 22 to 131 8 F ( − 30
to 55 8 C).
The outside air temperature mode includes
a low temperature warning feature. If the
outside air temperature is below 37 8 F
(3 8 C), the warning is displayed on the
screen.
The outside temperature sensor is located
in front of the radiator. The sensor may be affected by road or engine heat, wind
directions and other driving conditions.
The display may differ from the actual
outside temperature or the temperature
displayed on various signs or billboards.
6. Setting GUID-9F18B5C6-F437-4D24-B240-415AA28B0E09
Setting cannot be made while driving. A
message “ Setting can only be operated
when stopped ” is also displayed on the
dot matrix crystal display.
The
switch
* A
and switch
* B
are
used in the setting mode to select and
decide a menu.
SKIP: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
Push the switch
* A
to move to the
warning check mode.
Push the
switch
* B
to select other
menus.
ALERT: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
There are 3 submenus under the alert
menu.
. BACK
Select this submenu to return to the top
page of the setting mode.
. TIME TO REST
Select this submenu to specify when the “ time to rest ” indicator activates.
. ICY
Select this submenu to display the low
outside temperature warning.
MAINTENANCE: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
There are 5 submenus under the main-
tenance menu.
. BACK
Select this submenu to return to the top
page of the setting mode.
. ENGINE OIL
Select this submenu to set or reset the
distance for changing the engine oil.
. OIL FILTER
Select this submenu to set or reset the
distance for replacing the oil filter.
. TIRE
Select this submenu to set or reset the
distance for replacing tires.
. OTHER
Select this submenu and set or reset
the distance for replacing items other
than the engine oil, oil filter and tires.
DISPLAY: GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
There are 3 submenus under the display
menu.
Instruments and controls
2-27

Black plate (167,1)
[ Edit: 2012/ 1/ 17 Model: V36-D ]SPA2838
Coupe SPA2802
LOOSE FUEL CAP warning GUID-C419E1AB-BE96-4CEE-A3A0-A424103B7C58
The LOOSE FUEL CAP warning appears on
the dot matrix liquid crystal display when
the fuel-filler cap is not tightened correctly
after the vehicle has been refueled. It may
take a few driving trips for the message to
be displayed.
To turn off the warning, perform the
following:
1. Remove and install the fuel-filler cap as
soon as possible. (See “ Fuel-filler cap ”
(P.3-23).).
2. Tighten the fuel-filler cap until a single
click is heard. 3. Push the reset switch
* A
on the right
side of the combination meter panel for
about 1 second to turn off the LOOSE
FUEL CAP warning after tightening the
fuel cap.
Pre-driving checks and adjustments
3-25