seat memory INFINITI JX 2013 Quick Reference Guide

12
first drive features
3RD Row Seats
To recline the seatback, pull up on the latch
01 located
on the outside corner of each seatback. Lean back until
the desired angle is obtained.

To bring the seatback forward again, pull up on the
latch

01 and move your body forward. The seatback

will move forward.
for more information, refer to the “Safety —— seats, seat belts and supplemental
restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner

01 memory.

follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and
outside mirrors to the desired positions using the
adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least 1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.

These memorized positions can also be linked to your INfINITI Intelligent Key™.
for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch

To select the right or left side mirror, move the control
switch

01 right or left.


Adjust each mirror to the desired position using the
switch

02 .

To fold the outside rearview mirrors, push the switch

03 to the
position. To unfold the outside
rearview mirrors, push the switch

03 to the

position.
02
01
03
01
01