display INFINITI M HYBRID 2013 Quick Reference Guide

21


Speak in a clear and natural voice without pausing between words.

Look straight ahead and avoid speaking too loudly or too softly.

to go back to the previous command, say “Go back”.

to cancel a voice recognition session, say “exit” or press and hold the
or
button.

to interrupt the system voice and give a command quickly, press the
or
button.

when speaking phonebook names, please be aware some phones require the last name to be
spoken before the first name. For example, “Michael Smith” may be spoken as “Smith Michael”.

to increase or decrease the volume of the voice prompts, push the volume control switches

or
+ on the steering wheel or turn the VOL/ON•OFF control knob on the audio system while

the system is responding.

If the voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.

Some commands are not available while the vehicle is in motion.

the “Help” command can be used to hear a list of available commands at any time.

please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
Bluetooth® System with Navigation* (if so equipped)
cOnnectInG pROceduRe
nO te: the vehicle must be stationary when connecting
the phone.
1. press the PHONE button on the instrument panel or
the

button on the steering wheel and select the
“connect phone” key.
2. Initiate connecting from the phone.
• The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (the pIn code is assigned
by InFInItI and cannot be changed.)
3. when the connecting is complete, the screen will
return to the phone menu display.
*Some jurisdictions prohibit the use of cellular telephones while driving.

pHOneBOOk Setup

depending on your cell phone, the system may automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth system.

If the phonebook does not download automatically, the vehicle phonebook may be set for up to
1,000 entries.

to manually download entries:
1. press the

button and select the “v
ehicle
phonebook” key.
2. Select the “Add new” key at the top of the display.
there are different methods to input a phone
number. Select one of the following options:
• “Copy from Call History” to save a number from
the Outgoing, Incoming or Missed c alls lists.
• “Copy from the Handset” to save a number that
has been downloaded from your handset to
the vehicle.
• “Enter Number by Keypad” to input the number
and name manually.
MAkInG A cALL
t o make a call, follow this procedure:
1. press the

button on the steering wheel.
the “phone”
menu will appear on the control panel display.
2. Select the “v ehicle phonebook”, “ call History”,
“Handset phonebook” or “ dial n umber” key.
3. Select the desired entry from the list.
4. Select “c all” to start dialing the number.
ReceIvInG/endInG A cALL

to accept the call, press the
button on the steering
wheel or touch the “Answer” key. to reject the call,
touch the “Reject c all” key.


to hang-up, press the
button or touch the
“Hang-u p” key.
22
system guide

24
system guide
01
020304
0908
1110
0706
05
Navigation System (if so equipped)
01 t
ouch screen display.
02 d
estination (DESt) – press to enter a destination.
03 Information
(INFO) – press to display the vehicle, traffic (if so equipped), weather (if so
equipped) or voice recognition information.
04 SEttING – press to access the system settings.

05 Multi-Function c
ontroller
• ENtER – press the ENtER button to select the highlighted item on the screen.
• center dial – turn the dial to highlight an item on the screen, adjust a setting or adjust the
map scale.
• Slide the controller (push upward/downward/leftward/rightward) to select an item on the
screen, to adjust a setting or scroll the map in 8 directions.
06 ROUtE – press to access guidance control functions such as guidance cancellation, route

priority or waypoint setting on the route.

25
07 MAP – press to display the map.
while following a programmed route, press multiple times to
change the type of route information.
08 S
tAt US – press multiple times to display audio information, the air conditioner status, fuel
economy or navigation directions.
09 – press to switch between the day screen (bright) and the night screen (dark). press and
hold the button to turn the display off. press again to turn the display on.
10 BAC k – press to return to the previous screen. In a settings screen, this button can also be
used to apply the setting. In a character input screen, this button can also delete the characters
that have been entered.
11 VOICE – press to hear the current voice guidance for a programmed route.

For more information, please refer to your navigation System Owner’s Manual.
DVD Player (if so equipped)

this system allows you to play video files via a dvd
or cd from the front display.

to view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PARk)
position and apply the parking brake.

to reduce driver distraction, movies will not be shown
on the front display while the vehicle is in any drive
position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
HomeLink® Universal Transceiver

the HomeLink® system can learn
and consolidate the functions
of up to three different hand-
held transmitters, operating
items such as garage doors,
property gates, outdoor and
indoor lights or alarm systems.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
HOMELINk®