sensor INFINITI Q70 HYBRID 2015 Dismantling Guide

SRS Air Bag System Components Location
The SRS air bag system must not be cut as there is a risk of short circuit and unintentional deployment of
the SRS However, the vehicle can be cut (except inflators) under the following conditions:• The front, side and curtain air bags have deployed.
• At least three (3) minutes have passed after the 12-volt battery negative (-) cable has beendisconnected and the high voltage system has been shut down.
1. Crash zone sensor 2. Supplemental front air bag modules (Infiniti Advanced
Air Bags)3. Front seat-mounted side-
impact supplemental air bags
4. Occupant classification sensor
(pattern sensor) 5. Occupant classification system
control unit6. RH seat belt with pretensioner
7. Roof-mounted curtain side-
impact supplemental air bags 8. Roof-mounted curtain side-
impact supplemental air baginflators9. RH satellite sensor
10. Air bag control unit (ACU) 11. LH seat belt with pretensioner 12. LH Satellite sensor
13. Lap outer pretensioner
(if so equipped) 14. Front door satellite sensor LH
(RH similar)
AAYIA0020ZZ
DG–29

20. Disconnect the fusible link connectors (2) that areintegrated with the 12-volt positive battery cable (1) .
21. Disconnect the atmospheric pressure sensor harness connector (A) .
22. Disconnect the high voltage battery cooling fan motor harness connector.
23. Release the two rear seat cushion retainers.
AAYIA0073ZZ
A
AAYIA0406ZZ
AAYIA0044ZZ
DG–45