warning INFINITI QX30 2017 Owner's Manual

Volume settings
Volume setting items can be turned on/off and the sound for various functions including audio, phone (ringtone, incoming, and outgoing volumes),
navigation voice guidance (if equipped) and the system beeps can be adjusted.
1. Push <MENU>.
2. Touch [Settings].
3. Touch [Volume].
Setting itemAction
[Volume Adjustment] [Audio Volume] Adjust the volume level of the audio system. [Voice Guidance]* Turn the voice guidance on/off.
[Guidance Volume]* Adjust the volume level of voice guidance.
[Ringtone Volume] Adjust the ringtone volume level.
[Incoming Call Vol.] Adjust the incoming call volume.
[Outgoing Call Vol.] Adjust the outgoing call volume.
[InTouch Services Vol.]* Adjust the volume level of the InTouch
TMServices information channel. Refer
to the Navigation Owner’s Manual for details.
[Sonar Volume] Adjust the warning tone volume by touching [+]/[-].
[Button Beep Sound] Turn the button beep sound and alarm for prohibited operation on/off.
*: For models with navigation system.
4-12Display screen, heater and air conditioner, and audio system

say the exact command. This can be due to
noise conditions or an accent.
•Bluetooth® Compatibility: Some wireless de-
vices do not allow phonebook downloads,
text messaging, or other Bluetooth® audio
functions. Some wireless devices may only
have partial functionality of these features
even though the phone is compatible for
hands-free communication. If your phone is
listed as compatible and you are still expe-
riencing issues, please confirm that your
phone also has the latest software updates.
Additional help
For additional technical information, please
contact us online at
OWNERS.www.infinitiusa.com or call us at
1–800–662–6200, menu option 6.
ARearView Monitor display
BINFINITI controller
C<MENU> button
WARNING
Failure to follow the warnings and instructions
for proper use of the RearView Monitor could
result in serious injury or death.
NSD627
REARVIEW MONITOR (IF SO EQUIPPED)
4-16Display screen, heater and air conditioner, and audio system

Backing up near a projecting object
The predicted course linesAdo not touch the
object in the display. However, the vehicle may
hit the object if it projects over the actual
moving course.
Backing up behind a projecting
object
The positionCis shown further than the
position
Bin the display. However, the posi-
tion
Cis actually at the same distance as the position
A. The vehicle may hit the object
when backing up to the position
Aif the object
projects over the actual moving course.
HOW TO PARK WITH PREDICTED
COURSE LINES
WARNING
•If the tires are replaced with different sized
tires, the predicted course line may not be
displayed correctly.
•On a snow-covered or slippery road, there
may be a difference between the predicted
course line and the actual course line.
•The displayed lines will appear slightly off
to the right because the rear view camera is
not installed in the rear center of the ve-
hicle.
•If the battery is disconnected or becomes
discharged, the predicted course lines may
be displayed incorrectly. If this occurs,
please perform the following procedures: – Turn the steering wheel from lock to lock
while the engine is running.
– Drive the vehicle on a straight road for
more than 5 minutes.
SAA1923SAA1980
Display screen, heater and air conditioner, and audio system4-19

A[Settings] key
B<MENU> button
REARVIEW MONITOR SETTING
The RearView Monitor [Predictive Course Lines]
setting can be changed using the following
procedure.1. Push the
<MENU>button
Bon the INFINITI
Controller and touch [Settings]
Ain the
vehicle information display.
2. Touch [Camera]/[Sonar]
3. Touch [Camera]
4. Touch [Predictive Course Lines] When this item is turned on, the predicted
course line is displayed on the rear view
screen when the shift lever is in the R
(Reverse) position.
REARVIEW MONITOR SYSTEM
LIMITATIONS
WARNING
Listed below are the system limitations for
RearView Monitor. Failure to operate the ve-
hicle in accordance with these system limita-
tions could result in serious injury or death.
•The system cannot completely eliminate
blind spots and may not show every object.
•Underneath the bumper and the corner ar-
eas of the bumper cannot be viewed on the
RearView Monitor because of its monitoring
range limitation. The system will not show
small objects below the bumper, and may
NSD628
4-22Display screen, heater and air conditioner, and audio system

AAround View Monitor display
BINFINITI controller
C<MENU> button
D<CAMERA> button
WARNING
Failure to follow the warnings and instructions
for the proper use of the Around View Monitor
system could result in serious injury or death.
•The Around View Monitor is a convenience
feature and is not a substitute for proper
vehicle operation because it has areas
where objects cannot be viewed. The four
corners of the vehicle in particular, are ar-
eas where objects do not always appear in
the bird’s-eye, front, or rear views. Always
check your surroundings to be sure that it is
safe to move before operating the vehicle.
Always operate the vehicle slowly.
•The driver is always responsible for safety
during parking and other maneuvers.
CAUTION
Do not scratch the lens when cleaning dirt or
snow from the front of the camera.
The Around View Monitor system is designed as
an aid to the driver in situations such as slot
parking or parallel parking.
The monitor displays various views of the posi-
tion of the vehicle in a split screen format. All
views are not available at all times.
NSD651
AROUND VIEW MONITOR (IF SO EQUIPPED)
4-24Display screen, heater and air conditioner, and audio system

Available views:
•Front View
An approximately 150-degree view of the
front of the vehicle.
•Rear View
An approximately 150-degree view of the rear
of the vehicle.
•Bird’s-Eye View
The surrounding view of the vehicle from
above.
•Front-Side View
The view around and ahead of the front
passenger’s side wheel.To display the multiple views, the Around View
Monitor system uses cameras
1located in the
front grille, on the vehicle’s outside mirrors and
one just above the vehicle’s rear number plate.
AROUND VIEW MONITOR SYSTEM
OPERATION
With the ignition switch in the ON position,
move the shift lever to the R (Reverse) position
or press the <CAMERA>button to operate the
Around View Monitor.
The screen displayed on the Around View Moni-
tor will automatically return to the previous
screen 3 minutes after the <CAMERA>button
has been pushed while the shift lever is in a
position other than the R (Reverse) position.
Available views
WARNING
•The distance guide lines and the vehicle
width lines should be used as a reference
only when the vehicle is on a paved, level
surface. The distance viewed on the monitor
is for reference only and may be different
than the actual distance between the ve-
hicle and displayed objects.
•Use the displayed lines and the bird’s-eye
view as a reference. The lines and the bird’s-
eye view are greatly affected by the number
of occupants, fuel level, vehicle position,
road condition and road grade.
•When driving the vehicle up a hill, objects
viewed in the monitor are farther than they
appear. When driving the vehicle down a
hill, objects viewed in the monitor are closer
than they appear.
•Objects in the monitor will appear visually
opposite compared to when viewed in the
rear view and outside mirrors.
•Use the mirrors or actually look to properly
judge distances to other objects.
NAA1638
Display screen, heater and air conditioner, and audio system4-25

NOTE
When the monitor displays the front view and
the steering wheel turns about 90 degrees or
less from the neutral position, both the right and
left predicted course lines
6are displayed.
When the steering wheel turns about 90 degrees
or more, a line is displayed only on the opposite
side of the turn.
Bird’s-eye view
:
WARNING
•Objects in the bird’s-eye view will appear
farther than the actual distance.
•Tall objects, such as a curb or a vehicle, may
be misaligned or not displayed at the seam
of the views.
•Objects that are above the camera cannot
be displayed.
•The view for the bird’s-eye view may be mis-
aligned when the camera position alters.
•A line on the ground may be misaligned and
is not seen as being straight at the seam of
the views. The misalignment will increase
as the line proceeds away from the vehicle.
•Tire angle display does not indicate the ac-
tual tire angle. The bird’s-eye view shows the overhead view of
the vehicle, which helps confirm the vehicle
position.
The vehicle icon
1shows the position of the
vehicle.
NOTE
The size of the vehicle icon on the bird’s-eye
view may differ somewhat from the actual ve-
hicle.
The areas that the cameras cannot cover
2are
indicated in black.
The non-viewable area
2is highlighted in
yellow for several seconds after the bird’s-eye
view is displayed. It will be shown only the first
time after the ignition switch is placed in the ON
position. When the corner of the vehicle moves closer to
an object, the corner sensor indicator
3ap-
pears.
NAA1681
Display screen, heater and air conditioner, and audio system4-27

positionA. The vehicle may hit the object
when backing up to the position
Aif the object
projects over the actual moving course.
HOW TO PARK WITH PREDICTED
COURSE LINES
WARNING
•If the tires are replaced with different sized
tires, the predicted course lines may not be
displayed correctly.
•On a snow-covered or slippery road, there
may be a difference between the predicted
course lines and the actual course.
•The displayed lines will appear slightly off
to the right because the rear view camera is
not installed in the rear center of the ve-
hicle.
•If the battery is disconnected or becomes
discharged, the predicted course lines may
be displayed incorrectly. If this occurs,
please perform the following procedures: – Turn the steering wheel from lock to lock
while the engine is running.
– Drive the vehicle on a straight road for
more than 5 minutes.
•When the steering wheel is turned with the
ignition switch in the ACC position, the pre-
dicted course lines may be displayed
incorrectly.
The vehicle width and predicted course lines
are wider than the actual width and course.
1. Visually check that the parking space is safebefore parking your vehicle.
SAA1897
4-30Display screen, heater and air conditioner, and audio system

A[Settings] key
B<MENU> button
AROUND VIEW MONITOR SETTING
Around View Monitor settings can be changed
using the following procedure:
1. Push the<MENU>button
Bon the INFINITI
Controller and touch [Settings]
Ain the
vehicle information display.
2. Touch [Camera]/[Sonar]
3. Touch [Camera]
4. Touch [Moving Object Detection] Activate or deactivate the Moving Object
Detection (MOD) mode.
AROUND VIEW®MONITOR SYSTEM
LIMITATIONS
WARNING
Listed below are the system limitations for
Around View Monitor. Failure to operate the
vehicle in accordance with these system limi-
tations could result in serious injury or death.
•Do not use the Around View Monitor with
the outside mirror in the stored position,
and make sure that the lift gate is securely
closed when operating the vehicle using the
Around View Monitor.
NSD628
Display screen, heater and air conditioner, and audio system4-33

2. Touch [Camera/Sonar]
3. Touch [Sonar]
[Sonar sensitivity]:
Adjust the sonar sensor sensitivity level by
touching [+]/[-].
[Sonar volume]:
Adjust the buzzer volume by touching [+]/[-].
AAround View Monitor display
BINFINITI controller
C<MENU> button
D<CAMERA> button
WARNING
Failure to follow the warnings and instructions
for proper use of the Moving Object Detection
system could result in serious injury or death.
NSD651
MOVING OBJECT DETECTION (IF SO
EQUIPPED)
Display screen, heater and air conditioner, and audio system4-37