engine coolant INFINITI QX50 2019 Towing Guide
Page 16 of 25
 
 
 
 
 
2019 INFINITI Towing Guide  
 
 
15
PASSENGERS 
 
 WARNING- Never allow passengers to ride inside a trailer while it is being towed.  
Not only is this unlawful in most areas, passengers could be seriously injured during 
sudden trailer movement or in an accident. In addition, trailers may allow fumes from 
the tow vehicle to leak inside. This could result in carbon monoxide poisoning from the 
engine exhaust. 
 
VEHICLE MODIFICATIONS 
 
  WARNING - DO NOT modify your vehicle beyond those required for proper hitch 
installation, wiring hook-up, or adding extended mirrors on any INFINITI vehicle being 
used for towing purposes. Changes to the drivetrain, suspension, exhaust systems, 
electrical, frame structure/unibody, or other vehicle components are not necessary for 
towing within the limits described in this guide. These changes may diminish the 
reliability and longevity of your vehicle, void warranty coverage or possible result in loss 
of vehicle control and cause an accident, personal injury or death. 
 
 
TOOL KIT 
When towing, bring tools including flares, a flashlight, emergency reflectors, jumper 
cables, extra fuses, extra radiator coolant, oil, and easily replaced spare parts such as 
taillight bulbs. You should also carry spare tires for your tow vehicle and trailer, as well 
as a jack suitable for use on the trailer. Choose a jack that can raise and lower the 
trailer so that you can connect the coupler to and disconnect it from the ball of your 
hitch. Choose one with a weight capacity that matches or surpasses your trailer 
tongue weight. 
 
  WARNING- Be aware that your automotive jack is designed for lifting only your 
vehicle during a tire change. Using an automobile jack to lift a trailer-bearing load may 
be unstable possibly causing it to fall off the jack stand which may result in property 
damage or serious injury or death. 
 
BEFORE STARTING OUT 
Before starting out on a trip, make one last inspection of the tow vehicle and the trailer. 
Are the tire pressures correct? Are the safety chains/cables securely in place? Is the 
cargo tied down securely? Do all the lights work? Is the coupler properly attached over 
the hitch ball and secured using a locking pin? Is the breakaway switch hooked up 
and functioning properly? Are vehicle and electric trailer brakes working properly?  
 
Make a checklist of key items to inspect. When towing, vehicle engine oil, transmission 
oil, and coolant should always be checked before starting out. Finding a potential 
problem while in your driveway is better than discovering it miles from home.  
If you have never towed a trailer before, be aware that it does take getting used to.  
 
 
 
TOWING TIPS/CAUTIONS &  
Page 18 of 25
 
 
 
 
 
2019 INFINITI Towing Guide  
 
 
17
  WARNING- Do not use or rely upon the Back-up Collision Intervention system (BCI)       
when towing a trailer.  The BCI system cannot function properly when objects are 
obstructing the radar sensor beams.   
 
PARK SMART
 
A tow vehicle and trailer can be an unwieldy combination in a small area, so always 
try to park where you will have a relatively easy time maneuvering. Once parked, 
always block the wheels on both the tow vehicle and the trailer.   
 
Parking on a slope is not recommended. If, however, you must park on a slope and 
your vehicle is equipped with an automatic transmission, there are some precautions 
you should take:  
 Turn the wheels of the tow vehicle towards the side of the road away from the 
center of the road, and apply the parking brake and only then move the gear lever 
into PARK.   
 Next, block/chock the wheels once the tow vehicle and trailer are in position and 
are being held by the vehicle’s brake. 
  
 CAUTION-If you move the lever into PARK before blocking the wheels and applying 
the parking brake, it may be difficult to later shift out of PARK. Transmission damage 
may also occur. 
 
PASS CAREFULLY 
As mentioned in the introduction to this section, because of the added weight of the 
trailer, acceleration capability is reduced and you will require a longer distance to 
pass another vehicle. Be certain you have sufficient time and space to pass safely. 
 
 
  WARNING- Never attempt to pass on hills or when going around curves.  Doing so 
could cause a loss of vehicle control and result in accident, property damage or 
personal injury. Because the trailer does not follow the exact path as the tow vehicle 
on turns, safely passing and cornering while towing takes considerably more distance 
and turning space than normal. Be certain you have sufficient time and space to pass 
safely, remember, the length of the trailer must also pass the other vehicle before you 
can safely change lanes.  
 
HILLS – UPGRADES 
If your vehicle is equipped with an automatic transmission, it is designed to select 
automatically the correct gear for the best towing comfort and performance as the 
incline increases. To maintain speed or avoid up and down shifts, manually shift to a 
lower gear as needed. The added weight of a trailer places an increased load on the 
engine and cooling system, so monitor your coolant temperature gauge and 
automatic transmission fluid temperature gauge (if equipped) carefully. At the first sign 
of overheating, pull to the side of the road. See IF YOUR ENGINE OVERHEATS later in this 
section for more information.  
Page 20 of 25
 
 
 
 
 
2019 INFINITI Towing Guide  
 
 
19
IF YOUR ENGINE OVERHEATS 
A moderate increase in engine operating temperature is normal when towing a trailer. 
If, however, the coolant temperature gauge reading is abnormally high, or if you are 
experiencing a significant loss of power, or if you hear unusual engine noises,* the 
engine may be overheating and you should immediately take the following steps: 
 
1.  Pull your vehicle safely over to the side of the road, out of traffic. Apply the 
parking brake and move the gearshift lever to NEUTRAL (manual) or PARK 
(automatic). DO NOT STOP THE ENGINE. 
 
2.   Turn off the air conditioning and, after opening all the windows, turn the heater      
on to maximum hot and the fan to its highest speed, and exit the vehicle. The 
heater core in your vehicle is just like a miniature engine radiator and will provide 
an extra cooling surface to help reduce engine temperature. 
  
*See your vehicle owner’s manual for additional indications that your vehicle may be 
overheating. 
 
3. If the temperature does not drop or continues to increase, stop the engine 
immediately. 
 
4.  Being cautious of traffic, step out of the vehicle and, from a safe distance, look 
for steam underneath the engine. If you see steam or leaking coolant, stand 
clear to avoid being burned and shut off your engine immediately and allow it to 
cool. If there is no steam, open the hood.  
 
 WARNING -Never remove the radiator cap when the radiator is hot. If the cap is 
removed under these conditions, pressurized hot water/coolant may spurt out,  
possibly causing serious injury.  
 
5.  As soon as the engine has cooled to its normal operating temperature, visually 
inspect the drive belts for damage or looseness. A loose belt reduces water 
pump efficiency.  
 
  
  WARNING- Be careful to keep your hands, hair, jewelry, and clothing clear of the 
running drive belt and other moving parts when inspecting the engine and radiator. 
Also check to see if the cooling fan is running, and inspect the water pump, radiator, 
and radiator hoses for leaks. Keep in mind, too, that if your vehicle is equipped with  
  an electric fan motor, it may start without warning any time the coolant temperature 
is high. If you find leaking coolant, a loose or missing drive belt, or an inoperable fan, 
turn off the engine immediately. 
 
  
Page 21 of 25
 
 
 
 
 
2019 INFINITI Towing Guide  
 
 
20 6.  If no leaks are apparent and all other components appear to be operating 
properly with the engine cooled to its normal operating temperature; check the 
coolant level in the reservoir tank with the engine running. Add coolant to the 
reservoir tank if needed. At this point, if repairs are required, go to the nearest 
INFINITI retailer. See the IN CASE OF EMERGENCY section of your vehicle owner’s 
manual for additional information on overheating. 
 
NOTE – All INFINITI vehicles have an engine protection mode which helps reduce the 
chance of engine damage if the engine coolant reaches a specified temperature.  
 
 
NOTES 
 
 
 
 
 
 
 
 
 
 
 
 
Passenger Vehicles – INFINITI cautions that you do not tow a trailer with Q50, Q60, Q70, 
or Q70 (HEV) vehicles. 
 
Cross-Over Vehicles – INFINITI cautions that you do not tow a trailer QX30, QX50, or the 
QX70 2WD vehicles.  
 
Other Recommendations and Information – Towing performance and speed are 
affected by vehicle payload, tow weight, road grades, and weather conditions, 
including high temperatures. See your vehicle owner’s manual for details. 
 
TOWING GLOSSARY  
 
  BALL MOUNT A bar that holds the hitch ball and is inserted into the hitch receiver.  
Also commonly called a drawbar. 
  
1   Maximum Trailer Weight values are calculated assuming a base 
vehicle with driver and any options required, to achieve the 
rating.  Additional passengers, cargo and/or optional equipment 
will add weight to the vehicle and reduce your vehicle’s 
maximum towing capacity and trailer tongue load. 
 
2   In general, a weight-distributing hitch system (Class IV) should be 
used when towing over 5,000 lbs. 
 
3   Most states require a separate braking system on trailers with a 
loaded weight above a specific amount. Check local ordinances.  
7-pin connector trailer wire harnesses are required for use with 
trailer brakes (available separately).