INFINITI QX60 2023 Owners Manual

2023 OWNER’S MANUAL
AND MAINTENANCE INFORMATION
For your safety, read carefully and keep in this vehicle.


The information contained within this supplement revises or adds to the
“Foreword” section in the 2023 INFINITI Owner’s Manual.
• INFINITI SOFTWARE LICENSE
Read carefully and keep in the vehicle.
Printing: May 2022
Publication No. SU23EA IALLUO
OWNER’S MANUAL SUPPLEMENT

• Your vehicle includes physical parts and/or physical components of such parts on which software and/or firmware (“Software”) is embedded
or installed. Additionally, updates to Software may be made available by INFINITI for download and installation by owners from time to time
as determined by INFINITI in its sole discretion. Such Software, and all updates thereto, including updates delivered by INFINITI to your vehicle
over the air (collectively “Updates”), are licensed, and not sold, to you. A portion of the Software may contain or consist of open source
software, which may be used under the terms and conditions of the specific license under which the open source software is distributed. For
other Software, including Software for which there is no separate license agreement between you and the manufacturer or owner of the
Software, the terms and conditions governing your right to use and the use of the installed Software, including any Updates, applications,
services, and content provided for or through the Software, are set forth in the End User License Agreement found at https://
www.infinitiusa.com/owners/ownership/vehicle-software.html. Your use of the Software, including any Updates, constitutes consent to the
End User License Agreement’s terms and conditions.
• PLEASE NOTE: The End User License Agreement contains an arbitration clause. You may opt out of this arbitration clause within 30 days of
the date of your vehicle purchase by sending a signed, written notice to INFINITI at the following address:
Infiniti Division
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003 Franklin, TN 37068-5003
• Please refer to “Updating system software” in the 5. Information and vehicle settings or 5. Information section of the INFINITI InTouch®
Owner's Manual for information about installing Over-the-Air Updates. For questions or assistance concerning installation of any over-the-
air Update, you may contact INFINITI Consumer Affairs at 1-833-283-1886. You may also choose to visit an INFINITI Retailer for assistance
- charges may apply.
INFINITI SOFTWARE LICENSE

The information contained within this supplement revises or adds to the
“SEAT BELTS” section of the “Safety-Seats, seat belts and supplemental restraint system” and
“WARNING LIGHTS, INDICATOR LIGHTS AND AUDIBLE REMINDERS” and
“VEHICLE INFORMATION DISPLAY WARNINGS AND INDICATORS” section of the
”Instruments and controls” section in the QX60 Owner’s Manual.
Read carefully and keep in the vehicle.
Printing: May 2022
Publication No. SU23EA 0L51U0
OWNER’S MANUAL SUPPLEMENT

SEAT BELT WARNING LIGHT
AND CHIME
The light and chime remind you to fasten the
driver, front passenger and rear passenger
seat belts. A visual and audible alert will op-
erate in the following conditions:
• If the driver seat belt is not fastened.
• The front passenger’s seat belt is not fas-
tened and the seat is occupied by a passen-
ger for 7 seconds after the ignition switch is
placed in the ON position.• The front passenger’s seat belt is not fas-
tened and objects or external force on the
passenger seat change the seat belt re-
minder classification to “occupied”.
• Any rear passenger seat belt is operated
from fastened to unfastened.
For additional information, see:
• “Seat belt warning light and chime” in this
section.
• “Rear seat belt warning” in this section.
The below situations could result in the seat
belt warning function operating, even with no
occupant present in the front passenger seat:
• Heavy objects placed on the seat.
• Someone pushing or pulling on the front
passenger seat.
• An object placed under the front passenger
seat.
• An object placed between the seat cushion
and center console or between the seat
cushion and the door.
• An object hanging on the seat or placed in
the seatback pocket.
• A child restraint or other object pressing
against the rear of the seatback.
The rear seat belt reminder may operate if the
rear seat belts are used without occupants.
SEAT BELT WARNING
LIGHT AND CHIME
• The light and chime remind you to fasten
the seat belts.
• The seat belt warning light will illuminate
when the ignition switch is pushed to the
ON position if the driver’s seat belt is not
fastened, or if the front passenger seat belt
is not fastened when occupied.
• The seat belt warning light will also illumi-
nate if a rear passenger seat belt is changed
from fastened to unfastened.
• If the driver’s seat belt is not fastened when
the ignition switch is pushed to the ON
position, the chime will sound shortly.
• If the vehicle is driven above 9 mph (15
km/h) in the conditions that illuminate the
seat belt warning light, the lamp will begin
to blink and the chime will sound for over
one minute, or until the seat belt is fastened
again.
LRS0786

NOTE:
•The warning light and/or chime may acti-
vate if an object is placed in the unoccupied
front passenger seat. In this case, please
remove the object from the front passen-
ger seat.
•The warning light and/or chime may acti-
vate if any seat belt is unfastened before
the vehicle comes to a complete stop.
Please remain fastened until the vehicle
has come to a complete stop.
Rear seat belt warning
• This warning includes display of the seat
belts for rear positions only. Rear seat belts
that are unfastened will appear red.
• If any rear seat belts are unfastened when
the ignition switch is pushed to the ON
position, this warning will display for about
one minute, or until dismissed.
• When a rear seat belt is changed from fas-
tened to unfastened, this warning will dis-
play for over one minute, or until dismissed,
and the seat belt warning light will turn on.• If the vehicle is driven above 9 mph (15
km/h) during or after the status change,
this warning will display, the seat belt
warning light will blink, and the chime will
sound for over one minute. During this time,
the warning and chime cannot be dismissed
unless the rear seat belt is fastened again.
Once the seat belt warning light and chime
have turned off, the display will remain until
dismissed.
NOTE:
While it appears, this warning will also dis-
play the status of all doors and rear hatch.
Opening and closing a rear door while
stopped will reset this warning, similar to
pushing the ignition switch to the ON posi-
tion again.
Seat belt indicator and chime
• The indicator and chime remind you to fas-
ten the seat belts.
• The seat belt indicator appears when the
ignition switch is pushed to the ON position
if the driver’s seat belt is not fastened, or if
the front passenger seat belt is not fas-
tened when occupied.
• The seat belt indicator also appears if a rear
passenger seat belt is changed from fas-
tened to unfastened.• If the driver’s seat belt is not fastened when
the ignition switch is pushed to the ON
position, the chime will sound shortly.
• If the vehicle is driven above 9 mph (15
km/h) in the conditions that illuminate the
seat belt indicator, the indicator will begin
to blink and the chime will sound for over
one minute, or until the seat belt is fastened
again.
NOTE:
•The indicator and/or chime may activate if
an object is placed in the unoccupied front
passenger seat. In this case, please remove
the object from the front passenger seat.
•The indicator and/or chime may activate if
any seat belt is unfastened before the ve-
hicle comes to a complete stop. Please re-
main fastened until the vehicle has come to
a complete stop.

The information contained within this supplement revises or adds to the
“INSTALLING FRONT LICENSE PLATE” section of the “TECHNICAL AND CONSUMER INFORMATION”
section in the 2023 INFINITI QX60 Owner’s Manual.
Read carefully and keep in the vehicle.
Printing: May 2022
Publication No. SU23EA 1L51U0
OWNER’S MANUAL SUPPLEMENT

1. Hold the license bracket to the fascia and
vertically align with the notches on sides
and ensure the bracket fits properly on the
contour line (Figure A.) Find the center line
and align with arrow on the bracket.2. Mark hole locationOBon the fascia once
the license bracket is held in position.
3. Remove the license plate bracket and drill
two 0.39 in (10 mm) holes in the locations
marked in the previous step.
LTI2588LTI2711
Figure A
LTI2712
INSTALLING FRONT LICENSE PLATE

4. Insert two screw grommetsOCinto the
fascia.
5. Install the license plate bracket to the fas-
cia with two screws
OD.
WARNING
Please ensure that the front distance sen-
sor is unobstructed or blocked by large li-
cense plates or vanity plates. Blocking this
sensor can prevent the sensor from detect-
ing objects properly and may cause a mal-
function light to illuminate. If the malfunc-
tion light is illuminated some Safety Shield
systems will not function. If this happens
an accident could occur resulting in per-
sonal injury or death.
Ensure that the distance sensor
OEis not
covered or blocked.
LTI2580LTI2713

CALIFORNIA PROPOSITION 65 WARNING
WARNING
Operating, servicing and maintaining a passenger vehicle or
off-highway motor vehicle can expose you to chemicals
including engine exhaust, carbon monoxide, phthalates, and
lead, which are known to the State of California to cause
cancer and birth defects or other reproductive harm. To
minimize exposure, avoid breathing exhaust, do not idle the
engine except as necessary, service your vehicle in a well-
ventilated area and wear gloves or wash your hands
frequently when servicing your vehicle. For more information
go to www.P65Warnings.ca.gov/passenger-vehicle.