light INFINITI QX70 2017 Navigation Manual

2. Getting started
2-2
CONTROL BUTTONS AND FUNCTIONS
Designs and button layout may vary
depending on the specifications and the
model.
CONTROL PANEL (Type A)
*1<DEST>
Push to enter a destination. Various
methods for entering a destination are
available.
“4. Setting destination”
*2<ROUTE>:
Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
“5. Route guidance”
*3INFINITI controller:
Turn to highlight an item on the
screen, and push<ENTER>to select
the highlighted item.
On the map screen, turn to adjust the
map scale.
To scroll the map, push the controller
in the direction you want to scroll.
“INFINITI controller” (page 2-6)
*4<INFO>:
Push to display the vehicle, traffic,
weather or voice recognition informa-
tion.
“7. Viewing technical informa-
tion”
*5<STATUS>:
Push multiple times to display audio
information with either the air condi-
tioner status, fuel economy or naviga-
tion directions.
*6<DAY/NIGHT OFF>:
Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.

2. Getting started
2-4
*3INFINITI controller:
Slide or rotate to highlight an item on
the screen, and push<ENTER>to select
the highlighted item.
On the map screen, turn to adjust the
map scale.
To scroll the map, slide the controller
in the direction you want to scroll.
“INFINITI controller” (page 2-6)
*4<INFO>:
Push to display the vehicle, traffic,
weather or voice recognition informa-
tion.
“7. Viewing technical informa-
tion”
*5<SETTING>:
Push to access the system settings.
“8. Other settings”
*6<ROUTE>:
Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
“5. Route guidance”
*7<MAP>:
Push to display the map. While follow-
ing a programmed route, push multi- ple times to change the type of route
information displayed.
*8<BACK>:
Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.
In a character input screen, this button
is also used to delete the characters
that have been entered.
*9<VOICE>:
Push to hear the current guidance for a
programmed route.
*10<STATUS>:
Push multiple times to display audio
information with either the air condi-
tioner status, fuel economy or naviga-
tion directions.
*11<DAY/NIGHT OFF>:
Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.
INFO:
.
If <BACK> needs to be pushed to apply the
setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing <BACK>re-
turns the display to the previous screen.
.The layout of the control panel switches may
vary depending on the vehicle model and
equipment.

CONTROL PANEL (Type C)
*1<DEST>:
Push to enter a destination. Various
methods for entering a destination are
available.
“4. Setting destination”
*2INFINITI controller:
Slide or rotate to highlight an item on
the screen, and push<ENTER>to select
the highlighted item.
On the map screen, turn to adjust the
map scale. To scroll the map, slide the INFINITI
controller in the direction you want to
scroll.
“INFINITI controller”
(page 2-6)
*3<INFO>:
Push to display the vehicle, traffic,
weather or voice recognition informa-
tion.
“7. Viewing technical informa-
tion”
*4<SETTING>:
Push to access the system settings.
“8. Other settings”
*5<ROUTE>:
Push to access the guidance control
functions (guidance cancellation, route
priority, waypoint setting on the route,
etc.).
“5. Route guidance”
*6<MAP>:
Push to display the map. While follow-
ing a programmed route, push multi-
ple times to change the type of route
information displayed.
*7<BACK>:
Push to return to the previous screen.
In a settings screen, this button is also
used to apply the setting.
In a character input screen, this button
is also used to delete the characters
that have been entered.
*8<VOICE>:
Push to hear the current guidance for a
programmed route.
*9<STATUS>:
Push multiple times to display audio
information with either the air condi-
2. Getting started
2-5

2. Getting started
2-6
tioner status, fuel economy or naviga-
tion directions.
*10<DAY/NIGHT OFF>:
Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.
INFO:
.
If <BACK> needs to be pushed to apply the
setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing <BACK>re-
turns the display to the previous screen.
.The layout of the control panel switches may
vary depending on the vehicle model and
equipment.
INFINITI CONTROLLER
With Directional buttons
*1<ENTER>:
Push to select the highlighted item on
the screen.
If this button is pushed while a map is
displayed, the map menu screen is
displayed.
*2Main directional buttons:
Use to move across the map, highlight
an item on the screen or adjust a
setting (volume, brightness, etc.).
*3Additional directional buttons:
Use to move across the map or high-
light an item on the character input
screen.
*4Center dial:
Turn to highlight an item on the screen
or adjust a setting.
The center dial can also be used to
adjust the map scale.
Without Directional buttons
*1<ENTER>:
Push to select the highlighted item on
the screen.
If this button is pushed while a map is
displayed, the map menu screen is
displayed.
*2Center dial/Slide switch:
Center dial
Turn to highlight an item on the screen
or adjust a setting.

The center dial can also be used to
adjust the map scale.
Slide switch
Slide (push upward/downward/left-
ward/rightward) to select an item on
the screen or to adjust a setting
(volume, brightness, etc.).
The map can be scrolled in 8 directions
by sliding this switch.
STEERING WHEEL SWITCHES
Type A
Type B
Type C
Type D
Type E
*1<ENTER>:
Tilt to highlight an item on the screen
or adjust a setting. Push to select the
highlighted item.
If this button is pushed while a map is
displayed, the map menu screen is
2. Getting started
2-7

.Home
. Address Book
. Previous Destinations
. Nearby places
. My places
. Map input
TOUCH SCREEN OPERATION
The same operations described for the
scrolling dial are possible using touch
screen operation.
MENU SCREEN AND OPERATION METHOD
MENU SCREENS AND THEIR PURPOSES
Push <DEST>, <ROUTE>, <INFO>or
<SETTING> to display the corresponding
menu screen.
How to select menu item
Example: <DEST>screen
1. Highlight the preferred menu item using the INFINITI controller. 2. To select the highlighted menu item,
push <ENTER>. The next screen is
displayed.
3. Push <BACK>to return to the previous
screen.
Push <MAP> to return to the current
location map screen.
2. Getting started
2-11

Without directional buttons
There are five main methods to control the
navigation system: the center dial, the
main directional buttons, the slide switch,
the touch panel and the switches on the
steering wheel. Use these controls to
adjust the volume of the phone and voice
guidance, the display brightness, etc.
How to adjust
1. Highlight the preferred setting item andpush <ENTER>. The color of the corre-
sponding adjustment item changes. 2. Adjust the value or level indicating bar
using the INFINITI controller.
3. Push <ENTER>or<BACK> to apply the
setting.
INFO:
.
The volume of phone and voice guidance,
the display brightness, etc. can be adjusted
by tilting <ENTER>on the steering wheel up
and down.
.These same adjustments can also be
performed using the touch panel operation.
“Adjusting volume and others”
(page 2-15)
START MENU
The start menu can be displayed using the
switches on the steering wheel.
1. Push and hold <ENTER>on the steering
wheel.
2. Highlight the preferred item and push <ENTER>.
INFO:
<ENTER> on the steering wheel can be used to
display the start menu only when the map or
status screen is displayed.
Available setting items
2. Getting started
2-13

2. Getting started
2-14
.[Destination]:
Displays the destination screen. It is
the same screen that appears when
<DEST> is pushed.
“4. Setting destination”
. [Route]:
Displays the route screen. It is the
same screen that appears when
<ROUTE> is pushed.
“5. Route guidance”
. [Info]:
Displays the information screen. It is
the same screen that appears when
<INFO> is pushed.
“7. Viewing technical information”
. [Settings]:
Displays the settings screen. It is the
same screen that appears when
<SETTING> is pushed.
“8. Other settings”
LIST SCREEN
After searching for a point of interest, a list
screen is displayed.
Depending on the list displayed, it can be
sorted.
Items displayed in list
*1Highlight the preferred item from the
list and push <ENTER>to select it. If a
location or facility name is not com-
pletely displayed (due to length), high-
light the item to display the hidden part of the name.
*2Distance from the current location
*3Direction to the point of interest
*4If the entire list cannot be displayed on
the screen, the system displays the
total number of items in the list and
the entry number of the selected item.
Scroll the list using the INFINITI con-
troller.

*5The list will automatically scroll to the
section of the list that begins with the
letter selected.
INFO:
This feature is only available when the list is
sorted by name and is not active for all lists.
*6Highlight and push<ENTER>to select
the other sort options.
*7When the list is sorted by the shortest
distance, the selected location can be
confirmed in the preview displayed on
the right side of the screen.
*8Highlight and push <ENTER>to modify
the search conditions.
TOUCH PANEL OPERATION
With this system, it is possible to use the
INFINITI controller and touch panel opera-
tion to perform the same operations.
This manual describes the operations
using the INFINITI controller.
For the operations that differ from those of
the INFINITI controller and for useful
methods for using the touch panel opera-
tion, refer to each section.
EXAMPLE OF TOUCH PANEL OPERA-
TION
Examples of operations performed using
the touch panel operation are described
here.
Selecting item
When the item is touched, the next screen
is displayed.
Adjusting volume and others
Touch [+] or [−] located on the right and left
of the bar graph to perform the adjust-
ment.
Scrolling a list or message
Touch []or[] to scroll the list or
message.
Touch [
]or[] to skip to the next page.
2. Getting started
2-15

2. Getting started
2-16
Inputting letters and numbers
1. Touch the letter or number.
2. Touch [Delete] to delete a character.Push and hold [Delete] to delete all of
the characters.
HOW TO INPUT LETTERS AND NUMBERS
CHARACTER (letters and numbers)
INPUT SCREEN
Alphanumeric characters are entered to set
a destination, search for a facility, edit
stored locations, etc.
1. Use the INFINITI controller to highlight a
character on the displayed keyboard.
2. Push <ENTER>. The highlighted charac-
ter is entered.
INFO:
Inputting letters can also be done with the
touch panel operation.
3. Push <BACK>, or highlight [Delete] and
push <ENTER> to delete the last char-
acter entered.
Push and hold <BACK>to delete all the
characters entered.
Highlight [Space] and push <ENTER>to
enter a space.