alarm INFINITI QX80 2014 Quick Reference Guide

2*Infiniti Connection™ is only available on vehicles equipped with optional Infiniti Connectio\
n™ subscription service.
INFINITI Connection™ System* (if so equipped)
Infiniti Connection™ combines personalized convenience
and concierge settings and personal security features
to compliment the Total Ownership Experience.
For more details on Infiniti Connection
™, or to enroll
your vehicle, please visit www.Infiniticonnection.com
or call 855-444-7244.
Available services include:
Infiniti Personal Assistant – To access Infiniti Personal

Assistant, select “Connect to Voice Menu” from the Infiniti Connection menu or touch the

key on the map screen. At the voice prompt, say “Infiniti Personal As\
sistant” to be connected.
•


Your Infiniti Personal Assistant can send destination information direct\
ly to your vehicle.


Automatic Collision Notification – In case of air bag deployment, a s\
ignal is sent containing

the vehicle location and customer information to a Response Specialist w\
ho notifies the
proper authorities.
Emergency Call – This service provides emergency

assistance by connecting subscriber to an Infiniti
Connection
™ Specialist.
•


In case of an emergency, press the in-vehicle

telematics SOS

button
01.
•


A Response Specialist will provide assistance based

on the situation described by the vehicle’s occupant.
Enhanced Roadside Assistance – Roadside Assistance can be accessed by\
touching the Infiniti

Connection™ key on the Info menu, the key on the map screen or by pressing the SOS button. •
This service allows subscribers to receive assistance for a non-emergenc\
y incident such

as towing or a third party response.
•


If warranted, Roadside Assistance may also be used in conjunction with t\
he Emergency


Assistance service by pressing the SOS button.
My Schedule – Access your personal online Google Calendar™, hear details read via

text-to-speech** and select locations as a destination via the navigatio\
n system.
Report Stolen Vehicle – A Response Specialist will attempt to obtain \
location information

from a reported stolen vehicle and provide that information to local law\
enforcement
agencies to assist in the recovery of your stolen vehicle.
Remote Door Lock/Unlock – Remotely access your vehicle via Infiniti C\
onnection Response

Specialist or designated website to remotely lock or unlock your vehicle\
.
Alarm Notification – This system will notify you when the factory-ins\
talled vehicle alarm

system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance no\
tifications based

on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunct\
ion that triggers

instrument panel warning lights.
Destination Assistance – Receive point-of-interest assistance via gui\
ded IVR (Interactive

Voice Response), or Response Specialist by pressing the
key on the map screen, or
Infiniti Connection™ web portal.
01
new system features
1591592_14b_Infiniti_QX80_QRG_093013.indd 29/30/13 9:35 AM

8
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key system allows you to lock
or unlock your vehicle, open your liftgate and start the
engine. It is important to make sure the Intelligent Key
is with you (that is, in your pocket or purse).
REMOTE ENGINE START*
The remote engine start system must be enabled in
the vehicle settings within the vehicle information display.
The remote engine start operating range is approximately
200 ft (60 m) from the vehicle. The effective operating range
may be shorter due to environmental conditions or obstacles
between you and the vehicle.
For the remote engine start to function, the vehicle must be
in the P (PARK) position with the ignition off, and all the doors
closed and locked.
To start your vehicle remotely:



1.

Press the button
02
2. Within 5 seconds press and hold the remote engine start

button
06 for at least 2 seconds.

The engine will start and the parking lights will turn on.
Automatic climate control will begin heating or cooling the vehicle depe\
nding on the
last used mode.
The engine will run for 10 minutes and then turn off.
Repeat steps 1 and 2 to extend the time for an additional 10 minute peri\
od.
•


After two remote starts the ignition switch must be cycled before the re\
mote start can


be used again.
To start driving depress the brake pedal and push the ignition switch START/STOP button.
To lock the vehicle, push either door handle request switch 01 once or press the button
02 on the key fob.
To unlock the vehicle, perform one of the following procedures:



•

Push either door handle request switch 01 once; the corresponding door will unlock. Push
the door handle request switch
01 again within 1 minute; all other doors will unlock, or



•


Press the button 03 on the key fob to unlock the driver’s side door. Press the button
again; all other doors will unlock.
To open the liftgate, press the button 04 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pres\
sing and holding
the
button 05 for more than 1 second. Once activated, the panic alarm and headlights
will stay on for a period of time.
01
06
02
03
04
05
1591592_14b_Infiniti_QX80_QRG_093013.indd 89/30/13 9:35 AM

25
HomeLink® Universal Transceiver
The HomeLink system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage

doors, property gates, outdoor and indoor lights
or alarm systems.
To program the HomeLink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76
mm) away from the HomeLink surface, keeping
the HomeLink indicator light in view.



•


Press and hold the desired HomeLink button and the handheld transmitter \
button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink and ob\
serve the
indicator light:



•

A solid continuous light indicates the programing is complete and the Ho\
meLink button
will activate your device.



•

A blinking light that turns to a solid continuous light after 2 seconds \
indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:



•

At the receiver of the device that you are programing to the HomeLink, p\
ress and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.



•

Press and hold the programmed HomeLink button for 2 seconds and release.\
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programming
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMELINK
1591592_14b_Infiniti_QX80_QRG_093013.indd 259/30/13 9:36 AM