ABS JEEP WAGONEER 2022 Owners Manual

W$5N,N*
The ABS contains sophisticated electronic
equipment that may be susceptible to interfer-
ence caused by improperly installed or high
output radio transmitting equipment. This
interference can cause possible loss of
anti-lock braking capability. Installation of
such equipment should be performed by qual -
ified professionals.
Pumping of the Anti-Lock Brakes will diminish
their effectiveness and may lead to a collision.
Pumping makes the stopping distance longer.
Just press firmly on your brake pedal when you
need to slow down or stop.
The ABS cannot prevent the natural laws of
physics from acting on the vehicle, nor can it
increase braking or steering efficiency beyond
that afforded by the condition of the vehicle
brakes and tires or the traction afforded.
WARNING!

W$5N,N*
5LGLQg tKe bUakeV FaQ OeaG to bUake IaLOXUe aQG
SoVVLbO\ a FoOOLVLoQ. 'ULYLQg ZLtK \oXU Ioot UeVtLQg
oU ULGLQg oQ tKe bUake SeGaO FaQ UeVXOt LQ
abQoUPaOO\ KLgK bUake tePSeUatXUeV e[FeVVLYe
OLQLQg ZeaU aQG SoVVLbOe bUake GaPage. <oX
ZoXOG Qot KaYe \oXU IXOO bUakLQg FaSaFLt\ LQ aQ
ePeUgeQF\.
W$5N,N*
Use only manufacturer&#39;s recommended brake
fluid Úpage 409. Using the wrong type of
brake fluid can severely damage your brake
system and/or impair its performance. The
proper type of brake fluid for your vehicle is
also identified on the original factory installed
hydraulic master cylinder reservoir.
To avoid contamination from foreign matter or
moisture, use only new brake fluid or fluid that
has been in a tightly closed container. Keep
the master cylinder reservoir cap secured at
all times. Brake fluid in a open container
absorbs moisture from the air resulting in a
lower boiling point. This may cause it to boil
unexpectedly during hard or prolonged
braking, resulting in sudden brake failure. This
could result in a collision.
Overfilling the brake fluid reservoir can result
in spilling brake fluid on hot engine parts,
causing the brake fluid to catch fire. Brake
fluid can also damage painted and vinyl
surfaces, care should be taken to avoid its
contact with these surfaces.
WARNING!
8

22_WS_OM_EN_USC_t.book Page 359