JEEP WRANGLER 2015 JK / 3.G Owners Manual
Page 261 of 695
2. Remove the back window.
NOTE:Start zipper from the right side to remove back
window.
3. Release header latches from the windshield frame.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259
Page 262 of 695
4. Release the sail panel retainers from the body side
channel at the rear corners of the vehicle.
NOTE:When releasing the sail panel retainers, it is
helpful to pull down on the rear roof bow.
5. Fold the sail panels so that they rest on top of the soft
top.
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 263 of 695
6. Fold header rearward, pulling the fabric to the rear.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261
Page 264 of 695
7. Release Sunrider® latch (both sides).8. Open the swing gate and lower the top.
NOTE:Ensure the fabric does not overhang the sides of
the vehicle.
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 265 of 695
Quick Steps For Raising The Soft Top
1. Open the swing gate and raise the top, engaging the
Sunrider® latches (another person may be needed to
help with this operation).
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263
Page 266 of 695
2. Install rear corner panels.3. Rotate the header forward.
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 267 of 695
4. Engage the header latches.5. Install the back window.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265
Page 268 of 695
6. Install the side windows.7. To install the side windows, affix the window tempo-
rarily by attaching to the Velcro® in the rear corner.
Start the zipper but close only about 1 in (2.5 cm).
8.Insert the front retainer of the window into the door
channel, making sure the retainer is fully seated and
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Page 269 of 695
properly positioned on the door frame. Failure to do so
can result in wind and water leaks or damage to the
window.
9. Insert the retainer along the bottom edge of the
window into the bottom side channel, beginning at the
front and working to the rear of the vehicle. Finish by
closing the zipper completely and attaching the Vel-
cro® along the top and rear of the window. Repeat this
step for the opposite side.
1 — Incorrect Insertion2 — Correct Insertion
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267
Page 270 of 695
Folding Down The Soft Top
1—HeaderBow6—BodySideRetainer2—2–Bow7—QuarterWindow3 — 3–Bow8 — Check Strap4—4–Bow9—FrontRetainer—QuarterWindow5 — Sail Panel10 — Bottom Retainer — Quarter Window
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE