steering KIA CADENZA 2020 Navigation System Quick Reference Guide

2-10
Viewing the rear top view display (if equipped)
You can look down the rear view from the top through the rear-
view display.
1 On the rear-view screen, touch .
2 Check the top view display and assist guide lines.
 A
The guide lines appear on the rear top view.
000dDisplays the space required to open the trunk. After a
parking, check whether the space is suffi cient to open
the trunk and there is no obstacle.
000dDisplays the extension line from the center of the
vehicle. According to the steering direction, the moving
direction of the center is displayed on the screen.  A
Available settings may diff er depending on the vehicle model
and specifi cations.
 A
You can change the motion settings of the rear camera. On
the All Menus screen, touch Setup >
Advanced >
Extend
Rear Camera Use and then check Extend Rear Camera Use
to turn on the function. The rear view appears continuously
even when you change the shift position other than “R”
(Reverse) after reversing (if equipped).
> See “Extend Rear
Camera Use (if equipped).”
 A
Noting the parking assist guide lines based on the steering,
you can see the moving direction.
 A
A warning sound is heard when the vehicle approaches
obstacles while parking. When you set to automatically lower
the audio volume while parking, it can prevent accidents
caused by failure to hear the warning sound. On the All
Menus screen, touch Setup >
Sound >
Priority >
Proximity
Warning.
> See “Proximity Warning.”
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010013000e00120011>


ß
1



ß
1


2-15
2 Make conversation through the microphone of
the driver’s seat.
 A
To end the Driver Talk mode, touch End.
 A
When you move to another screen without touching End,
shortly press the End Call button on the steering wheel to
end the driver talk function.
 A
When the Driver Talk mode is active, the Radio/Media
functions are unavailable.
 A
To access the online user’s manual on the Driver Talk screen,
touch Menu >
User’s Manual on Web (QR Code) and then
scan the displayed QR code.
Using the Driver Talk mode in
the rear seat
(if equipped)
When the driver’s voice cannot be delivered well to the rear seat,
you can use the microphone of the driver’s seat for smooth
communication.
1 On the All Menus screen, touch Driver Talk.
The driver talk icon appears at the top right of the system
screen to display its status.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010013000e00120016>


ß
1



ß
1


3-4
Changing the radio channel
Perform any of the following methods:
000eOn the Radio screen, touch the desired channel from the
presets list.
 A
You can also change the channel by using the Move lever/
button on the steering wheel.
000eOn the control panel, press the [ SEEK] or [TRACK ] button.
You can move to the previous or next channel with good
reception.
000eWhen you know an accurate frequency, turn the [TUNE/FILE]
knob on the control panel to change the frequency.
You can listen to the changed radio broadcast.
Changing the channel by using voice
commands
You can change the radio channel by using voice commands.
1 On the Radio screen, touch .
2 When a guiding beep is heard, say the desired
radio station channel.
Changing the radio mode
Perform any of the following methods:
000eOn the Radio screen, touch Band.
000eOn the control panel, press the [RADIO] button repeatedly.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010014000e0015>


ß
1



ß
1


4-4
Playing the previous fi le
You can play the previous fi le during playback in the USB device.
Perform any of the following methods:
000eOn the USB music playback screen, touch within 3
seconds during playback.
000eOn the control panel, press the [
SEEK] button within 3
seconds during playback.
 A
After playback, you can play the previous music by touching
twice or pressing the [ SEEK] button on the control
panel twice.
 A
You can also run the function by using the Move lever/button
on the steering wheel.
 A
On the control panel, turn the [TUNE/FILE] knob to search for
a music fi le and press the knob within 5 seconds to play it.
 A
When there is no input for 5 seconds, the search stops and
the system displays the information of the current fi le.
Fast forward
By using the fast forward function, you can listen to music in the
USB device from the desired point during playback.
Perform any of the following methods:
000eOn the USB music playback screen, touch and hold .
000eOn the control panel, press and hold the [TRACK
] button.
 A
You can also run the function by using the Move lever/button
on the steering wheel.
Resuming playback of the current music
You can play the current music in the USB device from the
beginning.
Perform any of the following methods:
000eOn the USB music playback screen, touch after 3
seconds during playback.
000eOn the control panel, press the [
SEEK] button after 3
seconds during playback.
 A
You can also run the function by using the Move lever/button
on the steering wheel.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010015000e0015>


ß
1



ß
1


4-5
Turning on/off the random playback
You can turn on or off the random playback mode for USB music.
On the USB music playback screen, touch
repeatedly.
Each time the icon is touched, the random playback mode is
turned on and off . When the random playback is active, the fi les
are played randomly with no sequence.
Playing the next fi le
You can play the next fi le in the USB device during playback.
Perform any of the following methods:
000eOn the USB music playback screen, touch .
000eOn the control panel, press the [TRACK
] button.
 A
You can also run the function by using the Move lever/button
on the steering wheel.
 A
On the control panel, turn the [TUNE/FILE] knob to search for
a music fi le and press the knob within 5 seconds to play it
 A
When there is no input for 5 seconds, the search stops and
the system displays the information of the current fi le.
Changing the repeated playback mode for USB
music
You can change the repeated playback mode for USB music:
Repeat One, Repeat Folder, and Repeat All.
On the USB music playback screen, touch
repeatedly.
Each time the icon is touched, the playback repetition modes are
toggled and the activated mode icon appears on the screen.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010015000e0016>


ß
1



ß
1


4-9
Resuming playback of the previous Bluetooth
audio fi le
You can play the previous Bluetooth audio fi le during playback.
Perform any of the following methods:
000eOn the Bluetooth audio playback screen, touch twice.
000eOn the control panel, press the [
SEEK] button twice.
 A
The actions required may diff er depending on the connected
device.
 A
You can also run the function by using the Move lever/button
on the steering wheel.
 A
On the control panel, turn the [TUNE/FILE] knob to search for
a music fi le and press the knob within 5 seconds to play it.
 A
When there is no operation for 5 seconds, the search stops
and the system displays the information of the playing
content.
Pause/Resume
You can pause or resume playback of a Bluetooth audio fi le.
On the Bluetooth audio playback screen, touch
or
.
Resuming playback of the current Bluetooth
audio fi le
You can play the current Bluetooth audio fi le from the beginning.
Perform any of the following methods:
000eOn the Bluetooth audio playback screen, touch .
000eOn the control panel, press the [
SEEK] button.
 A
The actions required may diff er depending on the connected
device.
 A
You can also run the function by using the Move lever/button
on the steering wheel.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010015000e001a>


ß
1



ß
1


4-10
Resuming playback of the next Bluetooth audio
fi le
You can play the next Bluetooth audio fi le during playback.
Perform any of the following methods:
000eOn the Bluetooth audio playback screen, touch .
000eOn the control panel, press the [TRACK
] button.
 A
You can also run the function by using the Move lever/button
on the steering wheel.
 A
On the control panel, turn the [TUNE/FILE] knob to search for
a music fi le and press the knob within 5 seconds to play it.
 A
When there is no operation for 5 seconds, the search stops
and the system displays the information of the playing
content.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010015000e00120011>


ß
1



ß
1


5-8
Adjusting the navigation volume
You can adjust the volume of navigation or GPS warning sound.
On the map screen, touch and then touch or ,
or use the control bar to adjust the volume.
 A
To have the navigation sound always output fi rst over media
sound, check Navigation Volume Priority.
 A
To turn off the navigation sound, touch
and then touch .
 A
To adjust the navigation volume, on the All Menus screen,
touch Setup >
Sound >
Navigation Volume >
Use Map
Screen Volume Buttons or Volume Knob. During guidance,
use the Volume knob on the control panel or the Volume lever/
button on the steering wheel to adjust the navigation volume.
> See “Use Map Screen Volume Buttons or Volume Knob.”
Using the detailed guidance
When the vehicle needs to change the driving direction or lanes,
a zoomed-in map automatically appears.
 A
To display or hide the detailed guidance, touch or .
When the detailed guidance appears while driving,
select and perform the desired function.
a
b
a a For more information about the highway exits or rest areas,
touch Details.
b b You can check the POIs near the highway exit.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010016000e0019>


ß
1



ß
1


6-3
3 Turn on Bluetooth on the Bluetooth device to
connect and select the vehicle system on the list
of searched devices.
 A
The system’s Bluetooth name can be seen on the Add New
window.
4 Check that the authentication code on the
Bluetooth device screen matches the one on the
system screen and approve the connection on the
device.
5 When your smartphone is using Bluetooth
communication, to download contacts from the
phone to the system or use the text message
notifi cation, allow access to your phone.
 A
Access is only required to use Bluetooth calling. There will
be no access request when you connect an audio device.
Registering a device
To connect a Bluetooth device to the system, fi rst add the device
to the list of Bluetooth devices on the system.
1 On the All Menus screen, touch Setup >
Device
Connections >
Bluetooth >
Bluetooth
Connections >
Add New.
 A
To register a device for the fi rst time, press the Call button
on the steering wheel or by touching Phone on the All
Menus screen.
2 Select the function to connect.
 A
To use your phone on the system via Bluetooth
communication, touch Handsfree Calling.
 A
To listen to music on the system via Bluetooth
communication, touch Audio Streaming.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f004500430001000100010017000e0014>


ß
1



ß
1


6-7
Dialing from the recent call list
Make calls directly from call history of your mobile device.
When you connect your mobile device and system over Bluetooth,
the list of recent calls from the device will be downloaded to the
system and you can call them again by selecting them from the
system screen. The system has a built-in microphone and speaker
that make using mobile phones safe and easy.
1 Perform any of the following methods:
000eOn the All Menus screen, touch Phone.
000eOn the steering wheel, press the Call button.
2 On the Bluetooth Call screen, touch .
3 Choose a call from the list.
The system dials the selected number.
 A
You can also move to a desired number by using the Move
lever/button on the steering wheel without touching on
the screen.
Making a call via Bluetooth
You can connect a Bluetooth device with the hands-free function
to use a Bluetooth phone. The Bluetooth connection allows you
to view call details directly from the system screen, and to make
calls safely and easily use the system microphone and speaker.