ECO KIA NIRO 2017 Navigation System Quick Reference Guide

40
Voice Recognition
Navigation Commands
* Check the following before you use navigation commands:
1. Search for and find addresses located in the state or province your car is currently in.
If you want to search in another state, say the name of state/province and then look it up.
Find Address is classified by states/provinces to provide you with faster service.
2. Some commands such as “Cancel Route” are available only when the des- tination is fixed.
Command Operation
●Find Address
in <State>• Finds the address in <State> and sets it as the destina-
tion.
e.g.) Find Address in California
• To find an address, you should say “House Number →

Street →
City”.
e.g.) 300 (Three Zero Zero) Main Street, Almond
●Find Address Finds the address and sets it as the destination.
●Find POI Find the points of interest. After this command, you can
find the name of a location step-by-step.
●Find
<Category>Immediately finds <Category>. For detail of <Category>,
see “Find <Category>” list.
e.g.) Find “Banks”
●Map
Moves to the current position on the navigation map
●Previous
PointsDisplays a list combining Previous Destinations, Previous
Searches, and Previous Starting Points all together.
You can then set a destination by saying the list number.
●Previous
Destinations
Displays a list of recent destinations that you can return to
by saying the number in the list.
●Previous
SearchesDisplays a list of recent searches, where you can set a
destination by saying the number in the list.
●Previous
Starting PointsDisplays a list of recent starting points that you can return
to by saying the number in the list.
●Traffic
Information
Moves to the Traffic Information menu screen.
●Go HomeSet the destination to your home.
Your home must first be set in the Navigation system.
●Go to OfficeSet the destination to your office/work.
Your office/work must first be set in the navigation system.
,@%&
@(<64"@&6>"7/@23(JOEE



@(<64"@&6>"7/@23(JOEE


 


ß
1
 

42
Voice Recognition
Radio Commands
CommandOperation
●RadioPlays the most recent radio channels from FM, AM, and
SiriusXM™.
●FM
Plays FM radio.
●FM
<87.5~107.9>Tunes to FM <Frequency> according to what you say.
e.g.) FM 87.5: FM eighty seven point five
●SiriusXM Plays SiriusXM™ radio.
●SiriusXM
Channel
<0~999>Tunes to SiriusXM™ Channel <Channel Number> accord-
ing to what you say.
e.g.) SiriusXM Channel 23: SiriusXM Channel twenty three
●AM
Plays AM radio.
●AM
<530~1710>Tunes to AM <Frequency> according to what you say.
e.g.) AM 530: AM five thirty
○Preset <1~18> Tunes to your preset stations (1 to 18).
○Channel
<0~999>In SiriusXM™ Radio mode, turns on the <Channel
Number> that you say.
Media Commands
* Check the followings before you use media commands.
1. If no media is connected or if no playable files exist at the time when you use these
commands, a voice message will tell you that this is not available at present.
2. If you say the name of the media that is currently playing again, then that media will continue playing. e.g.) Saying “USB” while USB content is playing.
Command Operation
●Music Continues the last media you played.
●iPodPlays the iPod currently connected. This will work the same
when an iPhone is connected. If a USB is connected, then it will
be played instead of the iPod.
●USBPlays the music on the USB currently connected.
If an iPod is connected, then the iPod will be played instead of the
USB.
●Bluetooth
AudioPlays the music on the Bluetooth phone currently connected.
This may not be supported depending on the Bluetooth connec-
tion status.
●AUX Plays external devices that are currently connected.
●My Music Plays My Music files stored in the system.
●Pandora
Radio
Plays Pandora Radio that is currently connected. Pandora Radio
operates according to the iPod® that is currently connected.
,@%&
@(<64"@&6>"7/@23(JOEE



@(<64"@&6>"7/@23(JOEE


 


ß
1
 

44
Voice Recognition
UVO eServices Commands List
CommandOperation
●Roadside Assist Connect with a Roadside Assist agent.
●Vehicle
DiagnosticsInforms you if diagnostic issues are found in your vehicle
●My POIsDisplays Points of Interest list which were downloaded
from Google Maps and MyUVO
●eService Guide Provides guidance on how to use UVO eServices
Other Commands List (Commands used in List/Help)
Command
Operation
●HelpMoves to the voice recognition help screen.
All available commands can then be identified and used.
○Line 1~5
(One~Five)When you cannot select a certain name, such as in Call
History, you can select it using numbers.
Simple numbers can be recognized, such as “One” or
“Two”.
○Yes/No
When voice recognition is activated, this command is
used when an answer is requested for a confirmation
question.
○Previous Page/
Next PageWhen five or more searched items are listed, you can
move to the previous or next page using a voice com-
mand.
○Manual InputWhen Dial or POI Name search results are displayed,
this command is used to search manually, rather than to
search with a voice command.
Voice recognition stops after this command is used.
○Go Back
Moves to the previous screen.
●ExitEnds the voice recognition.
,@%&
@(<64"@&6>"7/@23(JOEE


@(<64"@&6>"7/@23(JOEE


 


ß
1
 

56
About Making/Answering Phone Calls
Q
How can I answer a call?
A
When there is an incoming call, a notification pop-up will become displa\
yed. To answer the incoming call, select the
Accept button on the screen or the
key on the steering wheel control. To reject the call, select the
Reject button on the screen or press the key on the steering
wheel control.

Q What should I do if I am talking on the Handsfree but want to switch the call
to the mobile phone?
A
While on a call, press and hold (over 0.8 seconds) the key on the
steering wheel control or select the
Use Private button at the bottom of the
Phone screen to switch the call to your mobile phone.
FAQ
,@%&
@(<64"@&6>"7/@23(JOEE


 @(<64"@&6>"7/@23(JOEE


 


ß
1
 

57
About Bluetooth® Wireless Technology/
Head Unit Use Environment
Q
What is the range of my wireless connection?
A
The wireless connection can be used within 15 yards.
Q
How many mobile phones can be paired?
A
It is possible to pair up to five mobile phones.
Q
Why is call quality sometimes poor?
A
Check the reception sensitivity of the mobile phone when call quality
becomes worsened. The call quality may deteriorate when the signal
strength is low. Call quality may also worsen if metal objects, such as bev-
erage cans, are placed near the mobile phone. Check to see if there are
metal objects in the vicinity of the mobile phone. The call sound and quality
may differ depending on the type of mobile phone.
,@%&
@(<64"@&6>"7/@23(JOEE


 @(<64"@&6>"7/@23(JOEE


 


ß
1
 

74
Route Guidance
Show route guidance detailed infor-
mation.
Route Guidance Screen
Remaining Time: Display the time
remaining until destination.
Arrival Time: Display the estimated
time of arrival.
Name Description

Display the
distance and
direction to the
first turn point.

Display the
distance and
direction to the
second turn
point.

Display the lane
information at
the current loca-
tion. Display the
recommended
direction in
white, travelable
direction in
white, and the
non-travelable
direction in grey.

Displays the dis-
tance to the des-
tination and the
estimated time of
arrival. Press the
button to check
the detailed
information. If
no waypoint is
set, you will see
the remaining
distance or
estimated time
of arrival in turn
each time you
click the button.
CancelRouteCancel the
route.
NaviMenu
Enter the nav-
igation menu
screen.
Destination InfoDisplays the
destination
information.
Turn ListTurn on or off
the Turn List.
Navigation
,@%&
@(<64"@&6>"7/@23(JOEE


@(<64"@&6>"7/@23(JOEE


 


ß
1