steering KIA OPTIMA PLUG-IN HYBRID 2017 Service Manual

NOTICE
•Up to 1,000 contacts entries can
be copied into car contacts.
•Upon downloading contacts data,
previously saved contacts data will
be deleted.
•Downloading is not possible if the
contacts download feature is
turned off within the Bluetooth®
Wireless Technology device. Also,
some devices may require device
authorization upon attempting to
download. If downloading cannot
be normally conducted, check the
Bluetooth® Wireless Technology
device setting or the screen state.
•Caller ID information will not be
displayed for unsaved callers.
•The download feature may not be
supported in some mobile phones.
Check to see that the Bluetooth®
Wireless Technology device sup‐
ports the download feature.
Bluetooth® Wireless Technology
(Type B-2, For Colombia model)
When No Devices have been Paired
1. çress the /PHONE button or
the button on the steering
wheel controls. The following
screen is displayed.
2. çress the [OK] button to enter the çair çhone screen.
• Car name: Name of device asshown when searching from your Bluetooth ®
Wireless Technology
device
• çasskey: çasskey used to pair the device
3. From your Bluetooth ®
Wireless
Technology device (i.e. Mobile
çhone), search and select your car
audio system.

6-91
6
Audio system

Voice Recognition Mode (if
equipped)
Using Voice Recognition
êtarting Voice éecognition
êhortly press the
button on the
steering wheel controls. êay a com‐
mand.
If voice recognition is in [Normal Mode], then the system will say L

Ending Voice éecognition
While Voice éecognition is operating
çress and hold the button on the
steering wheel controls. • While using voice command, pressing a steering wheel controls or a differ‐
ent button will end voice command.
• When the system is waiting for a voice command, say L

(Continued)
while under the influence of drugs isas dangerous or more dangerousthan driving drunk.You are much more likely to have aserious accident if you drink or takedrugs and drive.If you are drinking or taking drugs,don’t drive. Do not ride with a driverwho has been drinking or takingdrugs. Choose a designated driver orcall a cab.
WARNING
•When you intend to park or stopthe vehicle with the engine on, becareful not to depress the acceler‐ator pedal for a long period oftime. It may overheat the engineor exhaust system and cause fire.
(Continued)
(Continued)
•When you make a sudden stop orturn the steering wheel rapidly,loose objects may drop on thefloor and it could interfere withthe operation of the foot pedals,possibly causing an accident. Keepall things in the vehicle safely stor‐ed.
•If you do not focus on driving, itmay cause an accident. Be carefulwhen operating what may disturbdriving such as audio or heater. Itis the responsibility of the driverto always drive safely.

7-05
7
Driving your vehicle

ENGINE START/STOP BUTTON
Illuminated engine start/stop
button
Whenever the front door is opened, the
engine start/stop button will illuminate for your convenience. The light will go
off after about 30 seconds when the
door is closed. It will also go off imme‐ diately when the engine start/stop but‐
ton is ON position.
Engine start/stop button
position
OFF
To turn off the hybrid sys‐ tem (START/RUN position)
or vehicle power (ON posi‐ tion), press the engine start/stop button with the
shift lever in the P (Park) position. When you press the engine start/stop
button without the shift lever in the P
(Park) position, the engine start/stop button will not change to the OFF posi‐
tion but to the ACC position.
Vehicles equipped with anti-theftsteering column lock
The steering wheel locks when the en‐ gine start/stop button is in the OFF po‐
sition to protect you against theft. It locks when the door is opened.
If the steering wheel is not locked prop‐
erly when you open the driver's door, the warning chime will sound. Try lock‐
ing the steering wheel again. If the
problem is not solved, we recommend that the system be checked by an au‐
thorized Kia dealer.
/PU
JMMVNJOBUFE
In addition, if the engine start/stop but‐
ton is in the OFF position after the driv‐ er's door is opened, the steering wheel
will not lock and the warning chime will
sound. In such a situation, close the door. Then the steering wheel will lock
and the warning chime will stop.
NOTICE
If the steering wheel doesn't unlock
properly, the engine start/stop but‐
ton will not work. Press the engine
start/stop button while turning the
steering wheel right and left to re‐
lease the tension.
CAUTION
You are able to turn off the hybridsystem (START/RUN) or vehicle pow‐er (ON), only when the vehicle is notin motion. In an emergency situationwhile the vehicle is in motion, youare able to turn the hybrid systemoff and to the ACC position by press‐ing the engine start/stop button for
(Continued)
Driving your vehicle
7-06

(Continued)
more than 2 seconds or 3 times suc‐cessively within 3 seconds. If the ve‐hicle is still moving, you can restartthe hybrid system without depress‐ing the brake pedal by pressing theengine start/stop button with theshift lever in the N (Neutral) position.
ACC (Accessory)
Press the engine start/stopbutton while it is in the OFF
position without depressing the brake pedal.
The steering wheel unlocks (if equipped
with anti-theft steering column lock) and electrical accessories are opera‐
tional.
If the engine start/stop button is in the
ACC position for more than 1 hour, the button is turned off automatically to
prevent battery discharge.
"NCFS
ON
Press the engine start/stop
button while it is in the ACC position without depressingthe brake pedal.
3FEEJTI
PSBOHF
The warning lights can be checked be‐
fore the hybrid system is started. Do not leave the hybrid system start/stop
button in the ON position for a long
time. The battery may discharge, be‐ cause the engine is not running.
START/RUN
To start the hybrid system,depress the brake pedal and
press the engine start/stop button with the shift lever in the P (Park) or the N
(Neutral) position. For your safety, start the hybrid system with the shift
lever in the P (Park) position.
NOTICE
If you press the engine start/stop
button without depressing the brake
pedal for automatic transaxle vehi‐
cles, the hybrid system will not start
and the engine start/stop button
changes as follows:
OFF ACC ON OFF or ACC
/PU
JMMVNJOBUFE
NOTICE
If you leave the engine start/stop
button in the ACC or ON position for
a long time, the battery will dis‐
charge.
WARNING
•Never press the engine start/stopbutton while the vehicle is in mo‐tion. This would result in loss of di‐rectional control and braking func‐tion, which could cause an acci‐dent.
•The anti-theft steering columnlock (if equipped) is not a substi‐tute for the parking brake. Beforeleaving the driver's seat, alwaysmake sure the shift lever is engag‐ed in P (Park), set the parkingbrake fully and shut the engineoff. Unexpected and sudden vehi‐cle movement may occur if theseprecautions are not taken.
(Continued)

7-07
7
Driving your vehicle

(Continued)
•Never reach for the engine start/stop button or any other controlsthrough the steering wheel whilethe vehicle is in motion. The pres‐ence of your hand or arm in thearea could cause loss of vehiclecontrol, an accident and seriousbodily injury or death.
•Do not place any movable objectsaround the driver's seat as theymay move while driving, interferewith the driver and lead to an acci‐dent.
Starting the hybrid system
WARNING
•Always wear appropriate shoeswhen operating your vehicle. Un‐suitable shoes, such as high heels,ski boots, sandals, flip-flops, etc.,may interfere with your ability touse the brake and accelerator ped‐als.
(Continued)
(Continued)
•Do not start the vehicle with theaccelerator pedal depressed.The vehicle can move and lead toan accident.
NOTICE
•The hybrid system will start by
pressing the Engine Start/Stop
button, only when the smart key
is in the vehicle.
•Even when the smart key is in the
vehicle, and when it is far away
from the driver, the hybrid system
may not start.
(Continued)
(Continued)
•When the Engine Start/Stop but‐
ton is in the ACC or ON position,
any door is open, the system
checks for the smart key. When
the smart key is not in the vehicle,
the "" indicator will blink and
the warning "Key not in vehicle"
will come on. When all doors are
closed, the chime will also sound
for about 5 seconds. Keep the
smart key in the vehicle when in
the ACC position or if the hybrid
system is ON.
1. Always carry the smart key withyou.
2. Make sure the parking brake is ap‐ plied.
3. Make sure the shift lever is in P (Park).
4. Depress the brake pedal.
5. Press the Engine Start/Stop button. If the hybrid system starts, the
"
" indicator will come on.
Driving your vehicle
7-08

Shift-lock override
If the shift lever cannot be moved from
the P (Park) position into R (Reverse) position with the brake pedal de‐
pressed, continue depressing the brake,
then do the following: 1. Place the engine start/stop button switch in the LOCK/OFF position.
2. Apply the parking brake.
3. Carefully remove the cap (1) cover‐ ing the shift-lock release access
hole.
4. Insert a tool (e.g. flathead screw‐ driver) into the access hole andpress down on the tool.
5. Move the shift lever.
6. Remove the tool from the shift- lock override access hole then in‐
stall the cap.
7. We recommend that the system be inspected by an authorized Kia
dealer.
Good driving practices
• Never move the shift lever from P (Park) or N (Neutral) to any other po‐
sition with the accelerator pedal de‐ pressed. • Never move the shift lever into P
(Park) when the vehicle is in motion.
• Be sure the vehicle is completely stopped before you attempt to shift
into R (Reverse) or D (Drive).
• Never take the vehicle out of gear and coast down a hill. This may beextremely hazardous. Always leave
the vehicle in gear when moving.
• Do not "ride" the brakes. This can cause them to overheat and malfunc‐
tion. Instead, when you are driving
down a long hill, slow down and shift to a lower gear. When you do this,
engine braking will help slow down
the vehicle.
• Slow down before shifting to a lower gear. Otherwise, the lower gear maynot be engaged.
• Always use the parking brake. Do not depend on placing the transaxle in P
(Park) to keep the vehicle from mov‐
ing. • Exercise extreme caution when driv‐
ing on a slippery surface. Be especial‐ly careful when braking, accelerating
or shifting gears. On a slippery sur‐
face, an abrupt change in vehicle
speed can cause the drive wheels to
lose traction and the vehicle to go out of control.
• Optimum vehicle performance and economy is obtained by smoothly de‐
pressing and releasing the accelera‐
tor pedal.
WARNING
•Always buckle-up! In a collision, anunbelted occupant is significantlymore likely to be seriously injuredor killed than a properly belted oc‐cupant.
•Avoid high speeds when corneringor turning.
•Do not make quick steering wheelmovements, such as sharp lanechanges or fast, sharp turns.
•The risk of rollover is greatly in‐creased if you lose control of yourvehicle at highway speeds.
(Continued)

7-15
7
Driving your vehicle

BRAKE SYSTEM
Power brakes
Your vehicle has power-assisted brakes
that adjust automatically through nor‐ mal usage.
If the hybrid system is not on or is
turned off while driving, the power as‐
sist for the brakes will not work. You can still stop your vehicle by applying
greater force to the brake pedal than
typical. The stopping distance, however,will be longer than with power brakes.
When the hybrid system is not on, the reserve brake power is partially deple‐
ted each time the brake pedal is ap‐
plied. Do not pump the brake pedal when the power assist has been inter‐
rupted.
Pump the brake pedal only when nec‐
essary to maintain steering control on slippery surfaces.
WARNING
nBrakes
(Continued)
(Continued)
•Do not drive with your foot restingon the brake pedal. This will createabnormal high brake tempera‐tures, excessive brake lining andpad wear, and increased stoppingdistances.
•When descending a long or steephill, shift to a lower gear and avoidcontinuous application of thebrakes. Continuous brake applica‐tion will cause the brakes to over‐heat and could result in a tempo‐rary loss of braking performance.
•Wet brakes may impair the vehi‐cle’s ability to safely slow down;the vehicle may also pull to oneside when the brakes are applied.Applying the brakes lightly will in‐dicate whether they have been af‐fected in this way.Always test your brakes in thisfashion after driving through deepwater. To dry the brakes, applythem lightly while maintaining asafe forward speed until brakeperformance returns to normal.
(Continued)
(Continued)
•Always confirm the position of thebrake and accelerator pedal beforedriving. If you don’t check the posi‐tion of the accelerator and brakepedal before driving, you may de‐press the accelerator instead ofthe brake pedal. It may cause a se‐rious accident.
NOTICE
Do not depress the brake pedal con‐
tinuously without the "" indicator
ON. The battery may be discharged.
Disc brakes wear indicator
When your brake pads are worn and
new pads are required, you will hear a high-pitched warning sound from your
front brakes or rear brakes (if equip‐
ped). You may hear this sound come and go or it may occur whenever you
depress the brake pedal.

7-17
7
Driving your vehicle

Electronic stability control (ESC)
(if equipped)
0+'
The electronic stability control (ESC)
system is designed to stabilize the ve‐ hicle during cornering maneuvers. ESC
checks where you are steering and
where the vehicle is actually going. ESC applies the brakes at individual wheels
and intervenes with engine manage‐
ment system to stabilize the vehicle.
WARNING
Never drive too fast for the roadconditions or too quickly when cor‐nering. Electronic stability control(ESC) will not prevent accidents. Ex‐cessive speed in turns, abrupt ma‐neuvers and hydroplaning on wetsurfaces can still result in serious ac‐cidents. Only a safe and attentivedriver can prevent accidents byavoiding maneuvers that cause thevehicle to lose traction. Even withESC installed, always follow all thenormal precautions for driving - in‐cluding driving at safe speed for theconditions.
The electronic stability control (ESC)
system is an electronic system de‐ signed to help the driver maintain vehi‐
cle control under adverse conditions. It
is not a substitute for safe driving practices. Factors including speed, road
conditions and driver steering input can
all affect whether ESC will be effective in preventing a loss of control. It is still
your responsibility to drive and corner
at reasonable speed and to leave a suf‐ ficient margin of safety. When you apply your brakes under
conditions which may lock the wheels,
you may hear a L