reset KIA RIO 2017 Navigation System Quick Reference Guide
Page 6 of 67
4
Controls and functions
14DISC insert indicator LED
Displays that a DISC has been inserted.
15RESET
Resets the system - if software locks-up.
iINFORMATION
If pressing the 00330032003A00280035206B
646F
7269676874204449534320696E6469636174
72
WARNING
Always give your full attention to driving. Avoid operating your system in such a
way that you can be distracted driving vehicle operation.
1Volume Up/Down
Increases or decreases the speaker
volume within a range between 0 ~ 35.
2Seek Up/ Down
SHORT KEY(less than 0.8 second)
• FM/AM : Receives the previous or
next preset frequency.
• SIRIUS Mode : Receives the previous
or next preset channel.
• CD Mode : Plays the previous or
next track.
• MP3, USB Mode : Plays the previous
or next file.
• iPod Mode : Plays the previous or
next song.
LONG KEY(Over 0.8 second)
• FM/AM Mode : Quickly moves
through the frequencies while the
button is pressed. Once released, it
automatically searches for broad-
casts which can be received.
• SIRIUS Mode : Quickly moves to the
previous or next channel.
• CD Mode : REW/FF the current
playing track.
• MP3, USB Mode : REW/FF the
current playing file.
• iPod Mode : REW/FF the current
playing song.
Steering wheel remote controller
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E ß
y
Page 10 of 67
8
Operating the FM/AM radio
Listening to the FM/AM
radio
1. Press the 00290030001200240030206B6579
63
62616E64206F6620746865206D6F73742072
73656C6563
32
00290030001200240030206B6579
6368616E676520746865206465736972
45616368
62616E6473
46
→ FM2 → AM → FM1
3. Select the desired broadcast frequency.
Selecting FM/AM broadcast
frequency
Selecting a frequency
thr
ough presets
Press the preset button of the
desired broadcast frequency.
Selecting a Broadcast fre-
quency through SEEK
Press the 0466003600280028002E or 00370035002400260467
keys on the control panel or the
or button on FM1, FM2,
and AM mode screens for less
than 0.8 second. Once the SEEK
function is operating (SEEK indica-
tor blinking), the next or previous
broadcast frequency with superior
reception will be searched auto-
matically.
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E ß
y
Page 11 of 67
9
Selecting a broadcast fre-
quency through manual
search
Press the , buttons or
turn the
0037003800310028 knob on the
control panel in clockwise or coun-
ter-clockwise direction. Each click
on the tune knob or the
or
button will increase or
decrease the frequency by 1 step
(FM: 0.2 MHz, AM: 10 kHz).
Storing FM/AM preset
1. Select the desired frequency.
2. Press the preset button for over 0.8 second. The frequency will
become stored along with a
beep sound.
Scanning FM/AM broadcast
frequency
1. Press the 0036004600440051 button.
SCAN (less than 0.8 second) :
Scans all frequencies and plays
only frequencies with superior
reception for 5 seconds each.
PRESET SCAN (over 0.8 second):
Scans the 6 frequencies stored
as preset frequencies in the
current band for 5 seconds
each.
2. Press the
0036004600440051 button again to
continue listening to a frequen-
cy. The scan will be terminated
and the current frequency will
continue to be played.
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E ß
y
Page 12 of 67
10
Operating the SIRIUS radio
Listening to the SIRIUS
radio
1. Press the 003600240037 key on the
control panel. The SIRIUS radio
band screen of the most recent
station selected will be displa-
yed.
2. Press the
003600240037 key to change
the desired radio band. Each
press will change the bands in
the following order:
SIRIUS1
→ SIRIUS2 → SIRIUS3
→ SIRIUS1
3. Select the desired broadcast channel.
Switching the SIRIUS modes
(channel/category)
Each time the 002600240037 button is
pressed, the mode will switch
between channel mode and cate-
gory mode.
Category mode will begin opera-
ting when the orange light is
turned ON.
Selecting SIRIUS broadcast
channel
Selecting a channel through
pr
esets
Press the preset button of the
desired channel.
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E ß
y
Page 15 of 67
13
Storing SIRIUS presets
1. Select the desired channel.
2. Press the preset button for over 0.8 second. The frequency will
be saved along with beep
sound.
Scanning SIRIUS broadcast
channel
1. Press the 0036004600440051 button.
SCAN (under 0.8 second):
Scans all channels for 5 seconds
each if in channel mode. If in
category mode, scans all chan-
nels within the current category
for 5 seconds each.
PRESET SCAN (over 0.8 second):
Scans the 6 preset channels
within the current band for 5
seconds each.
2. Press the
0036004600440051 button again to
continue playing the channel.
The scan selection will be termi-
nated and the current channel
will continue to play.
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E ß
y
Page 42 of 67
40
Operating voice command
Listening to the FM2 PRESET 1
1. Press the key on the steering
wheel remote controller.
2. Once the
icon changes into the
icon on the pop•up screen with
a beep sound, say "FM2 preset 1".
Searching a destination by
address
1. Press the key on the steering
wheel remote controller.
2. Once the
icon changes into the
icon on the pop•up screen with
a beep sound, say "Find address".
3. Say "Change state" to change the state. 4. Say the state name.
5. Say the city name.
6. Say the street name.
7. Say the House number.
The range which can be inputted
will be displayed.
EXAMPLE 1 :
EXAMPLE 2 :
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E ß
y
Page 44 of 67
42
Operating voice command
FM/AM Radio
Command list of audio system
Commands with will be accessed in the selecting mode.
CommandOperation
"J
Radio Plays the most recent frequency for the most
recently operated Band.
"J (Radio) AM Plays the most recent frequency for the
corresponding Band.
"J (Radio) FM Plays the most recent frequency for the
corresponding Band. In the case of FM, the
most recent frequency within the most recently
played FM1 or FM2 band is played.
"J FM <1 or 2> Plays the most recent frequency for the
corresponding Band.
"J AM frequency <530 to 1710>
(ex. AM frequency 1310) Plays the desired AM band frequency.
"J FM frequency <87.5 to 107.9>
(ex. FM frequency 99.1) Plays the desired FM band frequency.
"J AM Preset <1 to 6> Plays the desired AM band preset frequency.
"J FM <1 or 2> Preset <1 to 6> Plays the desired preset frequency of FM1 or
FM2 band.
"I Preset <1 to 6> Plays the desired preset frequency for the
current Band.
"I Seek Up Searches and plays the next frequency of the
current band.
"I Seek Down Searches and plays the previous frequency of
the current band.
"I Preset Up Plays the next preset frequency of the current
band.
"I Preset Down Plays the previous preset frequency of the
current.
"I Scan Scans all frequencies within the current band.
"I Preset Scan Scans the 6 preset frequencies of the current
band.
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E
ß
y
Page 45 of 67
43
SIRIUS Radio
CD
CommandOperation
"J
DISC Plays the DISC already inserted in the CD Player.
"J CD
If the DISC inserted in the CD Player is either a CD
or MP3 DISC, then the CD or MP3 will be played.
"J
CD track <1 to 665> If the DISC inserted in the CD Player is a CD, then
CD Mode will start and plays the desired track.
"I Track <1 to 665> Plays the desired track.
"I Next track Plays the next track.
"I Previous track Plays the previous track.
"I Scan Scans all tracks on the CD DISC.
"I Repeat track Repeats the current playing track.
"I Random Plays the tracks of the CD DISC in random order.
"I Normal play Turns off the Scan, Repeat, and Random functions.
"I Pause Pauses the CD.
"I Play This command will only be enabled when the CD
is paused.
Command
Operation
"J
SIRIUS Plays the last channel within the last band from
SIRIUS1, SIRIUS2, and SIRIUS3.
"J SIRIUS <1 or 2 or 3> Plays the most recent channel for the
corresponding Band.
"J SIRIUS Channel <0 to 255> Plays the desired SIRIUS band channel.
"J
SIRIUS <1 or 2 or 3>
Preset <1 to 6> Plays the desired preset channel for SIRIUS1 or
SIRIUS2 or SIRIUS3 band.
"I Channel < 0 to 255 > Plays the desired channel of the current band.
"I Preset <1 to 6> Plays the desired preset channel of the current
band.
"I Channel Up Plays the next channel of the current band.
"I Channel Down Plays the previous channel of the current band.
"I Preset Up Plays the next preset channel of the current band.
"I Preset Down Plays the previous preset channel of the current
band.
"I Scan Scans all channels within the current band.
"I Preset Scan S cans all preset channels within the current band.
, @ 6 # @ ( < & / > @ 2 3 ( J O E E , @ 6 # @ ( < & / > @ 2 3 ( J O E E ß
y