audio KIA SEDONA 2016 Navigation System Quick Reference Guide

1
Table OF Contents
Table OF Contents
1
Controls and Functions
2
On-Screen Touch Controls
6
Setup
8
Home Screen
9
FM/AM
11
About HD Radio™ Technology
13
SiriusXM™ Mode
14
CD Mode
17
Using MP3 Mode
19
USB Music
21
USB Image
23
iPod
24
AUX
26
Bluetooth® Audio Mode
27
My Music
28
Using Bluetooth
30
Voice Recognition
35
FAQ
47
Pandora Radio
49
Download Center
50
SiriusXM Data
52
Navigation
58
,@:1@(<64@/>"7/@23(JOEE


<64@/>"7/@23(JOEE


 


ß
1



2
Controls and Functions
Head Unit
NameDescription
RADIOConverts to FM/AM/SiriusXM™ mode

•
Each time the key is pressed, the mode is changed in order of
FM →
AM →
SiriusXM™ →
FM
MEDIA
Converts to MEDIA mode

•
If the media is not connected or the CD player is not available
for Model, MEDIA mode will not be activated.

•
Press this key to move to the last mode that you accessed in
MEDIA Mode. Press it once again to display the screen where
you can select a MEDIA mode.
UVODisplays the UVO mode
When key is pressed shortly. (under 0.8 seconds)

•
FM/AM mode : plays previous/next frequency

•
SiriusXM™ mode : plays the previous/next channel

•
MEDIA ( Disc/USB/iPod/My Music) mode : changes the track, file
or chapter (e

xcept USB Image and AUX)
When key is pressed and held. (over 0.8 seconds)
•
FM/AM mode :
continuously changes the frequency until the key
is released

•
SiriusXM™ mode : continuously changes the channel until the
key is released and plays the current channel

•
MEDIA (Disc/USB/iPod/My Music) mode : rewinds or fastforwards
the track or file (except USB Image, Bluetooth Audio and AUX)
MAP
VOICEDisplays the map for the current position
,@:1@(<64@/>"7/@23(JOEE


 <64@/>"7/@23(JOEE


 


ß
1
 

3
NameDescription
NAVITakes you to the menu screen where you can find your destina-
tion and set the route.
PHONETakes user to phone screen
INFODisplays the information mode
SETUPDisplays the Setup mode

POWER/
VOL
•
When power is off, press to turn power on

•
When power is on, press and hold (over 0.8 seconds) to turn
power off

•
When power is on, press shortly (under 0.8 seconds) to turn
Audio off

•
Turn left/right to control volume

TUNE
•
FM/AM mode :
changes the frequency

•
SiriusXM™ mode : changes the channel

•
MEDIA (Disc/USB/iPod/My Music) mode : changes the track,
file or title (except USB Image, Bluetooth Audio and AUX)
RESET Resets the system settings. (Preset radio channels and other
data will not be deleted.)
SD Card insert slot
,@:1@(<64@/>"7/@23(JOEE



<64@/>"7/@23(JOEE


 


ß
1
 

4
Steering Wheel Remote Controller
Controls and Functions
NameDescription

When pressed shortly. (under 0.8 seconds)

!Ÿ
Activates voice recognition
When pressed and held. (over 0.8 seconds)
!Ÿ
Ends voice recognition

!Ÿ
Activates Siri Eyes Free
MODE

!Ÿ
Each time this key is pressed, mode is changed in order of FM
ª AM ª
SiriusXM™ ª
Disc ª

USB Music or iPod ª
AUX ª

Bluetooth Audio ª
My Music

!Ÿ
If the media is not connected, corresponding modes will be dis-
abled

!Ÿ
Press and hold the key (over 0.8 seconds) to turn the Audio
system on/off

!Ÿ
When power is off, press the key to turn power back on
VOL+
VOL-Controls the volume

When keys are pressed shortly. (under 0.8 seconds)

!Ÿ
FM/AM mode : searches broadcast frequencies saved to
Presets

!Ÿ
SiriusXM™ mode : searches broadcast channels saved to
Presets

!Ÿ
MEDIA(Disc/USB/iPod/My Music) mode : changes the track, file
or chapter (except USB Image, AUX)
When keys are pressed and held. (over 0.8 seconds)
!Ÿ
FM/AM Mode : Automatically searches broadcast frequencies

!Ÿ
SiriusXM™ mode : automatically searches broadcast channels

!Ÿ
MEDIA mode : Quickly looks up songs (excluding USB images,
AUX, and Bluetooth audio files)
,@:1@(<64@/>"7/@23(JOEE


 <64@/>"7/@23(JOEE


 


ß
1
 

26
AUX
Connecting an External Device
If an external device connector is
connected with the AUX terminal,
then AUX mode will automatically
operate. Once the connector is dis-
connected, the previous mode will
be restored.
!Ÿ
AUX mode can be used only when
an external audio player (camcorder,
car VCR, etc.) has been connected.

!Ÿ
The AUX volume can also be
controlled separately through the
connected device.
NOTICE
• If only cable connected to the AUX
without an e
xternal device, the mode
changed to AUX, but noise may occur.
When an external device is not being
used, remove the connector jack.
• When the external device power is
connected to the po

wer jack, playing
the external device may output noise.
In such cases, disconnect the power
connection before use.
,@:1@(<64@/>"7/@23(JOEE


 <64@/>"7/@23(JOEE


 


ß
1
 

27
Bluetooth Audio
i Information
• Artist info and Title may not supported by mobile phone
Bluetooth® Audio Mode
FeaturesDescription
Mode
Displays currently operating mode
Phone Name Displays name of connected phone
Artist InfoName of current artist
TitleName of current song
Previous
File
!Ÿ
If play time is less than 3 seconds, moves to the previous file

!Ÿ
If play time is over than 3 seconds, plays the current file from
the beginning
This function may differ depending on the model of mobile
phone
Play/Pause Plays/Pauses Bluetooth Audio
Next FileMoves to the next file
ConnectionsMoves to the Bluetooth Settings screen. You can pair a new
device or change/delete paired device(s)
SEEK/TRACK
Plays the previous/next file
TUNE
TUNE
is not supported.
,@:1@(<64@/>"7/@23(JOEE


 <64@/>"7/@23(JOEE


 


ß
1
 

43
CommandOperation
"J Radio
Plays the most recent radio channels from FM, AM, and SiriusXM™.
"JFM Plays FM radio.
"J FM
<87.5~107.9> Tunes to FM <Frequency> according to what you say.
e.g.) FM 87.5: FM eighty seven point five
"J SiriusXM™ Plays SiriusXM™ radio.
"J SiriusXM™
Channel
<0~999> Tunes to SiriusXM™ Channel <Channel Number> according
to what you say.
e.g.) SiriusXM™ Channel 23: SiriusXM™ Channel twenty three
"J AM Plays AM radio.
"J AM <530~1710> Tunes to AM <Frequency> according to what you say.
e.g.) AM 530: AM five thirty
!¹ Preset <1~18> Tunes to your preset stations (1 to 18).
!¹ Channel
<0~999> In SiriusXM™ Radio mode, turns on the <Channel Number>
that you say.
Radio Commands
Media Commands
* Check the followings before you use media commands.
1. If no media is connected or if no playable files exist at the time when you use these
commands, a voice message will tell you that this is not available at present.
2. If you say the name of the media that is currently playing again, then that media will continue playing. e.g.) Saying “USB” while USB content is playing.
Command Operation
"J Music Continues the last media you played.
"J iPod
Plays the iPod currently connected. This will work the same when an iPhone is
connected. If a USB is connected, then it will be played instead of the iPod.
"JUSB Plays the music on the USB currently connected.
If an iPod is connected, then the iPod will be played instead of the USB.
"J Bluetooth
Audio Plays the music on the Bluetooth phone currently connected.
This may not be supported depending on the Bluetooth connection status.
"J
AUX Plays external devices that are currently connected.
"J My Music Plays My Music files stored in the system.
"J Pandora
Radio Plays Pandora Radio that is currently connected.Pandora Radio
operates according to the iPod currently connected.
,@:1@(<64@/>"7/@23(JOEE



<64@/>"7/@23(JOEE


 


ß
1
 

44
Voice Recognition
1. Audio CD Command
CommandOperation
!¹ Play Plays a paused track.
Maintains the current settings during playback.
!¹ Pause Pauses a track that is currently playing.
Maintains current settings while paused during playback.
!¹ Track <1~99> Plays a desired track number.
!¹ Shuffle Plays tracks or files randomly.
Maintains current settings during shuffled playback.
!¹ Shuffle Off Cancels Shuffle and plays tracks sequentially.
Maintains current settings during sequential playback.
!¹ Repeat Plays the current track repeatedly.
Maintains the current settings during repeat playback.
!¹ Repeat Off Cancels Repeat and plays multiple tracks or files.
Maintains current settings during multiple track playback.
2. MP3 CD / USB Music / iPod / My Music Command
Command
Operation
!¹ Play Plays a selected file.
Maintains the current settings during playback.
!¹ Pause Pauses a file that is playing.
Maintains current settings while paused during playback.
!¹ Shuffle Plays tracks or files randomly.
Maintains current settings during shuffled playback.
!¹ Shuffle Off Cancels Shuffle and plays tracks sequentially.
Maintains current settings during sequential playback.
!¹ Repeat Plays the current track or file repeatedly.
Maintains the current settings during repeat playback.
!¹ Repeat Off Cancels Repeat and plays multiple tracks or files.
Maintains current settings during multiple track playback.
3. Pandora Radio command
Command
Operation
!¹ Skip Moves to the next track.
!¹ Thumbs up If you like the genre of the music currently playing, say
“Thumbs up” so that more similar music will play.
!¹ Thumbs down If you don’t like the music currently playing, say “Thumbs
down” to minimize the number of playbacks of similar
genre music.
,@:1@(<64@/>"7/@23(JOEE



<64@/>"7/@23(JOEE


 


ß
1
 

45
4. Bluetooth Audio / AUX Command
!Ÿ
Bluetooth Audio supports different functions according to connected devices,
therefore some commands are unavailable, including Play, Stop, Previous
Song, and Next Song.

!Ÿ
For external devices (AUX) and some commands are unavailable, including
Play, Stop, Previous, and Next.
UVO eServices Commands List
(Optional)
Command Operation
"J Roadside Assist Connect with a Roadside Assist agent.
"J Vehicle
Diagnostics Informs you if a diagnostic issue is found in
your vehicle
"J My POIs Show Points of Interest list which downloaded
from Google Maps and MyUVO
"J eService Guide Provides guidance on how to use UVO eServices
Other Commands List
(Commands used in List / Help)
Command Operation
"J Help Moves to the voice recognition help screen.
All available commands can then be identified and used.
!¹ Line 1~5
(One~Five) When you cannot select a certain name, such as in Call
History, you can select it using numbers.
Simple numbers can be recognized, such as “One” or
“Two.&#34;
!¹ Yes / No When voice recognition is activated, this command is
used when an answer is requested for a confirmation
question.
!¹ Previous Page /
Next Page When five or more searched items are listed, you can
move to the previous or next page using a voice com-
mand.
!¹ Manual Input When Dial or POI Name search results are displayed,
this command is used to search manually, rather than to
search with a voice command.
Voice recognition stops after this command is used.
!¹ Go Back Moves to the previous screen.
,@:1@(<64@/>"7/@23(JOEE


<64@/>"7/@23(JOEE


 


ß
1