navigation KIA SELTOS 2021 Navigation System Quick Reference Guide

2-7
Using the Apple CarPlay
1 On the All Menus screen, press Apple CarPlay.
2 Perform the desired function.
To run any of functions (phone, messaging, navigation,
etc.) on your iPhone, press the corresponding function
icon.
A
A
When you are using your smartphone′s navigation
via phone projection, sounds from both the system′s
radio/media function and the navigation will be output
through your vehicle′s speakers. When you turn the
Volume knob while both sounds are being output, the
navigation volume is adjusted first.
To run the Siri voice recognition, press and hold the Voice
Recognition button on the steering wheel.
A
A
To display the system Home screen, press
.
A
A
By pressing the [ MODE] button on the steering wheel, you
can run the media application on your smartphone as well as
the Radio/Media mode of the system.
A
A
To specify which functions to run when the [ MODE] button
on the steering wheel is pressed, press and hold the [ MODE]
button to display the settings screen.
A
A
When you receive a call, press the Call button on the steering
wheel to answer it.
A
A
When phone projection is active, you cannot change the
phone projection settings. To change the settings, remove the
USB cable from your system.
3 Connect an iPhone to the USB port on the vehicle
by using the provided USB cable.
A
A
When the connection is made for the first time, the system
screen displays a notification window. Check the details
and then press OK.
A
A
To end the Apple CarPlay and disconnect from the iPhone,
remove the USB cable from the system.
ÜCaution
Do not repeatedly connect and remove the USB connector
within a short time. It may cause device errors or system
failures.
4 When the iPhone is locked, unlock it first and then
consent to the use of Apple CarPlay.
When the iPhone is recognized successfully, the Apple
CarPlay menu is activated on the All Menus screen.

2-21
Seeing notifications (if equipped)
You can view UVO notifications including the navigation and map
update information.A
A
Subscribe to UVO to check the function.
> See “Subscribing to
the service.”
1 On the All Menus screen, press Notifications.
2 Select to view the item.
ca
b
a Returns to the previous step.
b View the list of received notifications. Select from the list
to view details.
A
A
Important notifications are marked with
next to
the title.
A
A
You cannot display notification details while driving.
Stop the vehicle first to view notifications.
Seeing the driving information
(if equipped)
You can analyze the driving patterns by checking the driving
information such as driving time, distance, idle time, and vehicle
speed distribution. Use this information to ensure safe and
economical driving.
A
A
This function is available only when your vehicle is stationary
with the vehicle started.
1 On the All Menus screen, press Driving Info.
2 Check the driving information of your vehicle.
A
A
To see the latest information, press .
AATo access the online user’s manual on the driving information
screen, press Menu >
User's Manual on Web (QR Code) and
then scan the displayed QR code.

Navigation
Navigation functions
Various ways to find routes Using the address book
Searching for gas stations
Searching for EV (Electric Vehicle) charging stations
05

5-2
Navigation functions
Navigation Menu overview
You can use the navigation system conveniently through various
functions on the Navigation Menu screen.
Perform any of the following methods:
On the All Menus screen, press Navigation Menu.
On the control panel, press the [
NAV] button.
am
c
l
defg
hijk
b
a Returns to the previous step.
b You can change the Navigation-related settings.
c Search for a location by entering various types of keywords
such as place name and address.
> See “ Searching by keyword.”
d Search for POIs by category to set as a destination.
> See “Searching the nearby points of interest.”
e Select any of previous destinations to set as a destination.
> See “Searching by previous destinations.”
f Register the location or use the address book for setting a
destination.
> See “Using the address book.”
g You can easily search for Kia Dealerships. > See “Searching for
Kia Dealerships.”
h You can cancel guidance to the destination. > See “ Stopping the
route guidance.”
i You can see the entire route information to the destination.
j You can edit the current route so that you can travel via
waypoints on the way to the destination.
> See “ Editing the
route.”
k You can change the route search criteria to resume routing.
> See “ Changing the route search criteria.”
l You can register your home, office, or other frequently visited
places as a favorite for ease of search.
> See “Registering a
frequently visited place as a favorite place.”
m The list of menu items appears.
 Reorder Icons: Can change the location of an icon on the
Navigation Menu screen.
User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
A
A
Available icons and their arrangement may differ depending
on the vehicle model and specifications.

5-3
2 Enter the location data such as place name,
address, or coordinates and then press OK.
3 Select a destination from the search result.
A
A
When communication is available, online search is
performed first.
A
A
You can see the sites in the list on the preview screen at
the right.
A
A
To sort the search results in a different order, press on the
attribute to toggle between options.
Finding a route easily
ÝWarning
Driving while distracted may cause a loss of vehicle control
that may lead to an accident, severe bodily injury, or death. The
driver’s primary responsibility is the safe and legal operation of
the vehicle, and the use of any devices or systems that take the
driver’s attention away from driving.
1 Perform any of the following methods:
On the All Menus screen, press Navigation Menu
>

Places.
 On the map screen, press .
A
A
Press and hold the [ NAV] button on the control panel to
enter into Places.

5-5
A
A
Navigation service may not be provided correctly under the
following conditions:

When the vehicle drives on a straight road continuously,
the system may guide you to drive straight. It is not a
malfunction.

Guidance may not be followed immediately after the
vehicle makes a turn at an intersection or drives through an
intersection.

The system may guide you to make a U-turn in a prohibited
area.

The system may guide you to a traffic-blocked road (e.g. no-
entry road or road under construction).

The system may guide you to a road away from the
destination when there is no road to the destination or
there are only narrow roads on the way.

Guidance may not be proper when the vehicle is off the
route.

Guidance may not match the actual distance on an
overpass or underpass due to the difference of the start
point.

When you are driving at high speeds, route recalculations
may take longer.
A
A
Because the navigation system is used for information
purposes only, Kia does not assume responsibility of the
accuracy of the information.
A
A
When the traffic information is not received, the status icon
appears at the top of the map screen.

HD Radio: The system is using the HD radio data. If no
traffic information is available, the status icon (
)
will be
displayed instead.

The vehicle is driving in a rugged mountain area or on a
steep curve road.

The vehicle is entering a public road after making a turn
through the turntable in an underground parking lot or
multi-story parking lot.

The vehicle stops and starts repeatedly or moves slowly in
front of an intersection.

The system reboots after the vehicle battery has been
recharged or replaced.

The vehicle is driving on a slippery road due to heavy snow,
etc.

The tires have been replaced recently or spare tires (or
studless tires) are used.

Improper-sized tires are used or the pressure of each tire is
different.

The replaced tire is worn out or the studless tires have been
used for over two seasons.

A roof carrier is installed on the vehicle.

On a highway. continued driving causes the system to
perform map matching or apply the updated GPS data.

5-6
a Displays the Home screen.
b Used to change the map display mode.
 (Heading Up): Rotates the map depending on the
travel direction.
 (North Up): Displays the map with the north fixed at
the top.
 (3D Map): Rotates the map depending on the travel
direction for 3D view.
c You can adjust the volume of navigation or GPS warning
sound.
d Zooms in the map.
e The scale of the map automatically changes.
f Zooms out the map.
g Displays the point to change the driving direction.
h Displays the next point to change the driving direction.
i Displays the lanes in different colors.
 Orange: Recommended lane
White: Available lane
Gray: Unavailable lane
Map screen
The map screen provides various functions and information, as
follows:
i
hg
j
a
b
c
d
e
f
klm
n
Type A
o
7\SH%(9R\
QO\\f

5-8
Stopping the route guidance
To stop route guidance, press Pause Route.
The destination displayed at the bottom of the screen disappears
and the Pause Route is replaced by Resume Route.A
A
To resume guidance to the previous destination, press
Resume Route.
A
A
To cancel guidance to the destination, press and hold Pause
Route , Resume Route , or Navigation Menu >
Cancel Route
on the All Menus screen.
Seeing traffic Information
You can see real-time traffic information such as ongoing road
works or accidents.
1 On the map screen, press > Traffic.
Adjusting the navigation volume
You can adjust the volume of navigation or GPS warning sound.
On the map screen, press and then press or ,
or use the control bar to adjust the volume.
A
A
To have the navigation sound always output first over media
sound, check Navigation Volume Priority.
A
A
To turn off the navigation sound, press
and then press .

5-9
Various ways to find routes
On the Navigation menu, you can set the destination by using
various searches, such as entering the location information or
selecting from recent destinations or categorized places.
Perform any of the following methods:
On the All Menus screen, press Navigation Menu.
On the control panel, press the [
NAV] button.
A
A
Available icons and their arrangement may differ depending
on the vehicle model and specifications.
2 Select an item from the real-time traffic
information list and see the details.
A
A
To reroute using recent traffic information while in
guidance, press Detour.
A
A
To see traffic information along the current route or to see
all available traffic information, press On Route.
A
A
To select the type of traffic information, press Filter.
3 Check the detailed traffic information.
A
A
Traffic information for border crossings and speed limits
for individual roads may not be accurate. Depending on
the road conditions, note the information.

5-10
2 Enter the location data such as place name,
address, or coordinates and then press OK.
A
A
When there are any similar matches, the
recommendations appear at the right of keypad.
A
A
To access the online user’s manual on the Places screen,
press Menu >
User's Manual on Web (QR Code) and
then scan the displayed QR code.
3 Select a destination from the search result.
A
A
You can see the sites in the list on the preview screen at
the right.
A
A
To sort the search results in a different order, press on the
attribute to toggle between options.
Searching by keyword
Enter various types of keywords such as place name and address
and then search for the destination.
1 On the Navigation Menu screen, press Places.
AAAvailable icons and their arrangement may differ
depending on the vehicle model and specifications.