start stop button KIA STONIC 2018 Owners Manual

INSTRUMENT PANEL OVERVIEW
0:#
1. Instrument cluster.......................... .......................... p. 4-45
2. Horn...................................... ...................................... p. 4-39
3. Driver’s front air bag........................ ........................ p. 3-46
4. Light control............................... ............................... p. 4-81Turn signals................................ ................................ p. 4-84
5. Wiper/Washer.............................. .............................. p. 4-90
6. Ignition switch.............................. .............................. p. 6-06 ENGINE START/STOP button................. ................. p. 6-10
7. Hazard warning flasher switch............... ............... p. 7-02
8. Audio
9. Central door lock switch..................... ..................... p. 4-18
10. Climate control system............... ............... p. 4-99, 4-108
11. AUX-USB port.............................. .............................. p. 5-03
12. Shift lever............................ ............................ p. 6-20, 6-24
13. Parking brake lever.................................................... p. 6-31
14. Passenger’s front air bag.................... .................... p. 3-46
15. Power outlet.............................. .............................. p. 4-129
16. Glove box................................. ................................. p. 4-122
17. Steering wheel audio remote control
18. Cigarette lighter........................... ........................... p. 4-126
19. Seat warmer.............................. .............................. p. 4-128
20. Heated steering wheel switch................ ................ p. 4-39
21. Idle Stop and Go system OFF button.......... .......... p. 6-16
22. USB charger.............................................................. p. 4-130

2-05
2
Your vehicle at a glance

(Continued)
key) is dangerous even if the key isnot in the ignition switch or startbutton is ACC or ON position.Children copy adults and they couldplace the key in the ignition switchor press the start button. The igni‐tion key (smart key) would enablechildren to operate power windowsor other controls, or even make thevehicle move, which could result inserious bodily injury or even death.Never leave the keys in your vehiclewith unsupervised children, whenthe engine is running.
WARNING
Kia recommends to use parts for re‐placement from an authorized Kiadealer/service partner. If an after‐market key is used, the ignitionswitch may not return to ON afterSTART. If this happens, the starterwill continue to operate causingdamage to the starter motor andpossible fire due to excessive currentin the wiring.
Immobilizer system
Your vehicle may be equipped with an
electronic engine immobilizer system to
reduce the risk of unauthorized vehicle
use.
Your immobilizer system is comprised of a small transponder in the ignition
key and electronic devices inside the
vehicle.
Vehicles without smart key system
With the immobilizer system, whenever
you insert your ignition key into the ig‐ nition switch and turn it to ON, it checks
and determines and verifies if the igni‐
tion key is valid or not.If the key is valid, the engine will start.
If the key is invalid, the engine will not
start.
To deactivate the immobilizer system:
Insert the ignition key into the key cyl‐ inder and turn it to the ON position.
To activate the immobilizer system:
Turn the ignition key to the OFF posi‐
tion. The immobilizer system activates
automatically. Without a valid ignition key for your vehicle, the engine will not
start.
Vehicles with smart key system
Whenever the engine start/stop button
is changed to the ON position, the im‐
mobilizer system checks and verifies if the key is valid or not. If the key is valid, the engine will start.
If the key is invalid, the engine will not
start.
To deactivate the immobilizer system
Change the engine start/stop button to
the ON position.
To activate the immobilizer system
Change the engine start/stop button to the OFF position. The immobilizer sys‐
tem activates automatically. Without a
valid smart key for your vehicle, the engine will not start.
WARNING
In order to prevent theft of your ve‐hicle, do not leave spare keys any‐where in your vehicle. Your immobil‐izer password is a customer uniquepassword and should be kept confi‐dential. Do not leave this numberanywhere in your vehicle.

4-05
4
Features of your vehicle

SMART KEY (IF EQUIPPED)
09.
With a smart key, you can lock or un‐
lock a door (and tailgate) and even start the engine without inserting the
key.
The functions of buttons on a smart
key are similar to the folding key.
Smart key functions
Carrying the smart key, you may lock
and unlock the vehicle doors (and tail‐ gate). Also, you may start the engine.
Refer to the following, for more details.
Locking
Pressing the button of the front out‐
side door handles with all doors (and tailgate) closed and any door unlocked,
locks all the doors (and tailgate). If all
doors (and tailgate) and engine hood are closed, the hazard warning lights
will blink once to indicate that all doors
(and tailgate) are locked. The button will only operate when the
smart key is within 0.7~1 m (28~40 in.)
from the outside door handle. If you
want to make sure that a door has locked or not, you should check the
door lock button inside the vehicle or
pull the outside door handle.
Even though you press the outside door
handle buttons, the doors will not lock and the chime will sound for 3 seconds
if any of following occur: • The smart key is in the vehicle.
• The ENGINE START/STOP button is in the ACC or ON position.
• Any door except the tailgate is open.
Unlocking
Pressing the button of the front out‐
side door handles with all doors (and tailgate) closed and locked, unlocks all
the doors (and tailgate). The hazard
warning lights blink twice to indicate that all doors (and tailgate) are un‐
locked.
The button will only operate when the
smart key is within 0.7~1 m (28~40 in.) from the outside door handle.
Features of your vehicle
4-10

• Lock the doors by pressing thelock button on the smart key.
After completion of the steps
above, the hazard warning lights
will operate once to indicate thatthe system is armed.
If any door (and tailgate) or en‐
gine hood remains open, the haz‐
ard warning lights won't operate
and theft-alarm will not arm. Af‐
ter this, if all doors (and tailgate)
and engine hood are closed, thehazard warning lights blink once.
Using the transmitter
Park the vehicle and stop the engine.
Arm the system as described below. 1. Turn off the engine and remove the ignition key from the ignition
switch.
2. Make sure that all doors (and tail‐ gate), the engine hood are closed
and latched. 3. Lock the doors by pressing the lock
button on the transmitter.
After completion of the steps
above, the hazard warning lights
will blink once to indicate that the
system is armed.
If any door (and tailgate) or engine
hood remains open, the hazard
warning lights won't operate and
theft-alarm will not arm. After this,if all doors (and tailgate) and engine
hood are closed, the hazard warn‐
ing lights blink once.
•
Do not arm the system until all pas‐sengers have left the vehicle. If thesystem is armed while a passenger(s)remains in the vehicle, the alarm maybe activated when the remaining pas‐senger(s) leave the vehicle. If anydoor, tailgate or engine hood isopened within 30 seconds after en‐tering the armed stage, the systemis disarmed to prevent unnecessaryalarm.
Theft-alarm stage
The alarm will be activated if any of the
following occurs while the system is armed. • A door is opened without using the transmitter (or smart key). • The tailgate is opened without using
the transmitter (or smart key).
• The engine hood is opened.
The horn will sound and the hazard
warning lights will blink continuously for approximately 30 seconds. To turn
off the system, unlock the doors with
the transmitter (or smart key).
Disarmed stage
The system will be disarmed when:
Transmitter
- The door unlock button is pressed.
- The engine is started.
- The ignition switch is in the L

This gauge indicates the temperature
of the engine coolant when the ignition switch or Engine Start/Stop button is
ON.
CAUTION
If the gauge pointer moves beyondthe normal range area toward theL

Shift to P (for smart key system
and automatic transaxle)
• This warning message illuminates ifyou try to turn off the engine with‐
out the shift lever in P (Park) position.
• At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop But‐
ton once more, it will turn to the ON position).
Low Key Battery (for smart key
system)
• This warning message illuminates if the battery of the smart key is dis‐
charged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning
wheel (for smart key system)
• This warning message illuminates if
the steering wheel does not unlock
normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turn‐
ing the steering wheel right and left.
Steering wheel unlocked (for smart
key system)
• This warning message illuminates if the steering wheel does not lockwhen the Engine Start/Stop Button
changes to the OFF position.
Check Steering Wheel Lock System
(for smart key system)
• This warning message illuminates if the steering wheel does not lock nor‐
mally when the Engine Start/Stop Button changes to the OFF position.
Press brake pedal to start engine
(for smart key system and
automatic transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Press clutch pedal to start engine
(for smart key system and manual
transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by
pressing the button repeatedly with‐ out depressing the clutch pedal.
• It means that you should depress the clutch pedal to start the engine.
Key not in vehicle (for smart key
system)
• This warning message illuminates ifthe smart key is not in the vehicle
when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key
system)
• This warning message illuminates if
the smart key is not detected when
you press the Engine Start/Stop But‐ ton.
Features of your vehicle
4-62

Press START button again (for
smart key system)
• This warning message illuminates ifyou can not operate the EngineStart/Stop Button when there is a
problem with the Engine Start/Stop
Button system.
• It means that you could start the en‐ gine by pressing the Engine Start/
Stop Button once more.
• If the warning illuminates each time you press the Engine Start/Stop But‐
ton, have the vehicle inspected by a
professional workshop. Kia recom‐
mends to visit an authorized Kia deal‐
er/service partner.
Press START button with key (for
smart key system)
• This warning message illuminates if you press the Engine Start/Stop But‐
ton while the warning message L

WARNING AND INDICATOR LIGHTS
Warning lights
NOTICE
nWarning lights
Make sure that all warning lights are
OFF after starting the engine. If any
light is still ON, this indicates a situa‐
tion that needs attention.
Air bag Warning Light
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button
to the ON position. - It illuminates for approximately 6 seconds and then goes off.
• When there is a malfunction with the SRS.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
Seat Belt Warning Light
This warning light informs the driver that the seat belt
is not fastened.
❈ For more details, refer to the L

WARNING
nParking Brake & Brake FluidWarning Light
Driving the vehicle with a warninglight ON is dangerous. If the ParkingBrake & Brake Fluid Warning Light il‐luminates with the parking brake re‐leased, it indicates that the brakefluid level is low.In this case, have the vehicle inspec‐ted by a professional workshop. Kiarecommends to visit an authorizedKia dealer/service partner.
Anti-lock Brake System
(ABS) Warning Light
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop button to the ON
position. - It illuminates for approximately 3 seconds and then goes off.
• When there is a malfunction with theABS (the normal braking system will
still be operational without the assis‐ tance of the anti-lock brake system).
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
Electronic Brake force
Distribution (EBD)
System Warning Light
These two warning lights il‐luminate at the same timewhile driving:
• When the ABS and regular brake system may not
work normally.
In this case, have the vehicle inspec‐ ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
WARNING
nElectronic Brake force Distri‐bution (EBD) system warninglight
(Continued)
(Continued)
When both ABS and Parking Brake &Brake Fluid Warning Lights are on,the brake system will not work nor‐mally and you may experience anunexpected and dangerous situationduring sudden braking.In this case, avoid high speed drivingand abrupt braking.Have the vehicle inspected by a pro‐fessional workshop as soon as possi‐ble. Kia recommends to visit an au‐thorized Kia dealer/service partner.
NOTICE
nElectronic Brake force Distri‐
bution (EBD) system warning
light
When the ABS Warning Light is on or
both ABS and Parking Brake & Brake
Fluid Warning Lights are on, the
speedometer, odometer, or tripme‐
ter may not work. Also, the EPS
Warning Light may illuminate and
(Continued)
Features of your vehicle
4-66

(Continued)
the steering effort may increase or
decrease.
In this case, have the vehicle inspec‐
ted by a professional workshop as
soon as possible.
Kia recommends to visit an author‐
ized Kia dealer/service partner.
Electronic Power
Steering (EPS) Warning
Light (if equipped)
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - This indicator light comes on after the ignition key is turned to the
ON position and then goes out af‐
ter approximately 3 seconds.
• When there is a malfunction with the EPS.
In this case, have the vehicle inspec‐ted by a professional workshop. Kia
recommends to visit an authorized
Kia dealer/service partner.
Malfunction Indicator
Lamp (MIL)
This warning light illumi‐nates:
• Once you set the ignition switch or Engine Start/Stop Button to the ON
position. - It remains on until the engine is started.
• When there is a malfunction with the emission control system.
In this case, have the vehicle inspec‐
ted by a professional workshop. Kia recommends to visit an authorized
Kia dealer/service partner.
CAUTION
nMalfunction Indicator Lamp(MIL)
Driving with the Malfunction Indica‐tor Lamp (MIL) on may cause dam‐age to the emission control systemswhich could effect drivability and/orfuel economy.
CAUTION
nGasoline Engine
If the Malfunction Indicator Lamp(MIL) illuminates, potential catalyticconverter damage is possible whichcould result in loss of engine power.In this case, have the vehicle inspec‐ted by a professional workshop assoon as possible.Kia recommends to visit an author‐ized Kia dealer/service partner.
CAUTION
nDiesel Engine
If the Malfunction Indicator Lamp(MIL) blinks, some error related tothe injection quantity adjustmentoccurs which could result in loss ofengine power, combustion noise andpoor emission.In this case, have the engine controlsystem inspected by a professionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.

4-67
4
Features of your vehicle