display Lexus CT200h 2015 Navigation Manual (in English)

20
2. QUICK REFERENCE
CT200h_Navi_OM76146U_(U)14.06.17 09:48
2. “Information” SCREEN
This screen can be used to display traffic information, fuel consumption, etc. Press the
“MENU” button on the Remote Touch, then select “Info” to display the “Information”
screen.

2. QUICK REFERENCE
1
QUICK GUIDE
21
CT200h_Navi_OM76146U_(U)14.06.17 09:48
No.FunctionPage
Select to display the fuel consumption screen.“Owner ’s Manual”
Select to display traffic information.100
Select to display weather information.282
Select to display the “LEXUS Insider” screen.378

3. NAVIGATION OPERATION
1
QUICK GUIDE
27
CT200h_Navi_OM76146U_(U)14.06.17 09:48
Select “OK”.
Selecting routes other than the one recom-
mended ( →P.121)
Guidance to the destination is displayed
on the screen and can be heard via voice
guidance.
6

3. NAVIGATION OPERATION
1
QUICK GUIDE
29
CT200h_Navi_OM76146U_(U)14.06.17 09:48
Select “OK”.
Selecting routes other than the one recom-
mended ( →P.121)
Guidance to the destination is displayed
on the screen and can be heard via voice
guidance.
5

30
CT200h_Navi_OM76146U_(U)14.06.17 09:48
4. FUNCTION INDEX
1. FUNCTION INDEX
XMap
X Route guidance
Displaying mapsPage
Viewing the map screen82
Displaying the current position85
Viewing the current position vicinity map91
Changing the scale86
Changing the map orientation88
Displaying map Information93
Displaying the estimated travel/arrival time to the destination126
Selecting the map mode89
Displaying traffic information100
Searching for destinationsPage
Searching for the destination107
Changing the search area108
Before starting or during route guidancePage
Starting route guidance121
Editing the route133
Viewing the entire route map127
Pausing guidance124
Adjusting route guidance volume72
Deleting the destination135
Address bookPage
Registering address book entries144
Marking icons on the map145

4. FUNCTION INDEX
1
QUICK GUIDE
31
CT200h_Navi_OM76146U_(U)14.06.17 09:48
XUseful functions
InformationPage
Displaying vehicle maintenance75
Hands-free system (for cellular phone)Page
Registering/connecting a Bluetooth® phone46
Making a call on a Bluetooth® phone310
Receiving a call on the Bluetooth® phone316
Voice command systemPage
Operating the system with your voice264
Peripheral monitoring systemPage
Viewing behind the rear of the vehicle286

34
CT200h_Navi_OM76146U_(U)14.06.17 09:48
1. BASIC INFORMATION BEFORE OPERATION
1. INITIAL SCREEN
1When the power switch is in ACCES-
SORY or ON mode, the initial screen
will be displayed and the system will be-
gin operating.zAfter a few seconds, the “CAUTION”
screen will be displayed.
z After about 5 seconds, the “CAUTION”
screen automatically switches to the home
screen. (Select
“Continue” or press the
“HOME” button on the Remote Touch to
display the home screen.)z Images shown on the initial screen can be
changed to suit individual preferences.
(→ P. 6 8 . )
WA R N I N G
●When the vehicle is stopped with the
hybrid system operating, always apply the
parking brake for safety.

35
1. BASIC INFORMATION BEFORE OPERATION
2
BASIC FUNCTION
CT200h_Navi_OM76146U_(U)14.06.17 09:48
1Press and hold the “PWR•VOL” knob
for 3 seconds or more.
MAINTENANCE
INFORMATION
This system reminds users when to re-
place certain parts or components and
shows dealer information (if registered)
on the screen.
When the vehicle reaches a previously
set driving distance or date specified for
a scheduled maintenance check, the
“Maintenance Reminder” screen will be
displayed when the navigation system is
turned on.
z This screen goes off if the screen is not
operated for several seconds.
z To prevent this screen from being dis-
played again, select “Do Not Display
This Message Again”.
z To register maintenance information:
→ P. 7 5
z If is selected, the registered phone
number can be called.
RESTARTING THE SYSTEM
When system response is extremely
slow, the system can be restarted.

36
1. BASIC INFORMATION BEFORE OPERATION
CT200h_Navi_OM76146U_(U)14.06.17 09:48
2. HOW TO USE THE Remote Touch
1Use the Remote Touch knob to select
the desired button on the screen.
2To select the button on the screen, press
the Remote Touch knob. Once a button
has been selected, the screen will
change.
zWhen the pointer moves close to a button,
it will be automatically pulled onto that but-
ton. The strength of this pull can be
adjusted. ( →P. 6 4 )
z The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.
z Press the “” button on the Remote Touch
to zoom in on the map screen and the “”
button to zoom out. These buttons can also
be used to scroll up and down on list
screens.
z When is displayed on the screen,
select to return to the previous
screen.
z Press the “MENU” button on the Remote
Touch to display the “Menu” screen.
( → P.1 2 )
z The home screen can be displayed by
pressing the “HOME” button on the
Remote Touch. ( →P.1 4 )This navigation system can be operated
by the Remote Touch when the power
switch is in ACCESSORY or ON
mode.

38
1. BASIC INFORMATION BEFORE OPERATION
CT200h_Navi_OM76146U_(U)14.06.17 09:48
3. HOME SCREEN OPERATION
1Press the “HOME” button on the
Remote Touch.
2Check that the home screen is dis-
played.
z When a screen is selected, the selected
screen will change to a full-screen display.
1Select .
2Check that “Customize Home Screen”
is displayed.
The home screen can display multiple
information screens, such as the naviga-
tion system screen, audio system screen
and fuel consumption screen, simulta-
neously. CUSTOMIZING THE HOME
SCREEN
The display items/area on the home
screen and the home screen layout can
be changed.
No.FunctionPage
Select to change the dis-
play items/area.39
Select to change the home
screen layout.39