wheel Lexus ES300h 2014 Navigation Manual

144
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1. PHONE OPERATION
1. QUICK REFERENCE
Bluetooth® phones can be operated via the navigation system’s screen. To displa\
y the
hands-free operation screen, press the “MENU” button on the Remote Touch and
then select “Phone” , or the switch on the steering wheel.

146
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
2. PHONE (HANDS-FREE SYSTEM FOR CELLULAR PHONE)
The hands-free system enables calls to
be made and received without having to
take your hands off the steering wheel.
This system supports Bluetooth
®.
Bluetooth
® is a wireless data system
that enables cellular phones to be used
without being connected by a cable or
placed in a cradle.
The operating procedure of the phone is
explained here.
z For registering and setting of the phone,
see “PHONE SETTINGS” on page 172
and “Bluetooth
® SETTINGS” on page
194.
CAUTION
●While driving, do not use a cellular phone
or connect the Bluetooth® phone.
●Your audio unit is fitted with Bluetooth®
antennas. People with implantable car-
diac pacemakers, cardiac resynchroniza-
tion therapy-pacemakers or implantable
cardioverter defibrillators should main-
tain a reasonable distance between
themselves and the Bluetooth
® antennas.
The radio waves may affect the operation
of such devices.
●Before using Bluetooth® devices users of
any electrical medical device other than
implantable cardiac pacemakers, car-
diac resynchronization therapy-pace-
makers or implantable cardioverter
defibrillators should consult the manufac-
turer of the device for information about
its operation under the influence of radio
waves. Radio waves could have unex-
pected effects on the operation of such
medical devices.
NOTICE
●Do not leave your cellular phone in the
vehicle. The temperature inside may rise
to a level that could damage the phone.
INFORMATION
●
If your cellular phone does not support
Bluetooth®, this system cannot function.
●In the following conditions, the system
may not function:
• The cellular phone is turned off.
• The current position is outside the com- munication area.
• The cellular phone is not connected.
• The cellular phone has a low battery.
●When using Bluetooth® audio and
hands-free at the same time, the following
problems may occur:
•The Bluetooth
® connection may be cut.
• Noise may be heard on the Bluetooth®
audio playback.

147
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
*: This profile is necessary when usingApps. (See “APPS” on page 358.)
Bluetooth is a regi stered trademark of
Bluetooth SIG, Inc.
z The microphone can be used when talking
on the phone.
INFORMATION
●
This system supports the following ser-
vices:
• Bluetooth
® Specification
Ver.1.1 or higher
(Recommended: Ver.2.1 + EDR or
higher)
• Profiles HFP (Hands Free Profile)
Ve r.1 . 0 o r h i g h e r
(Recommended: Ver.1.5 or higher)
OPP (Object Push Profile)
Ver.1.1 or higher
PBAP (Phone Book Access Profile)
Ve r.1 . 0 o r h i g h e r
MAP (Message Access Profile)
Ve r.1 . 0 o r h i g h e r
SPP (Serial Port Profile)
Ver.1.1 or higher*
●If your cellular phone does not support
HFP, registering the Bluetooth® phone
or using OPP, PBAP, MAP or SPP pro-
files individually will not be possible.
●If the connected Bluetooth® phone ver-
sion is older than recommended or
incompatible, this function may not be
used.
●Refer to http://www.lexus.com/
MobileLink to find approved Bluetooth®
phones for this system.
USING THE PHONE SWITCH
By pressing the phone switch, a call can
be received or ended without taking
your hands off the steering wheel.

152
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3. REGISTER A Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch.
2Select “Phone” .
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select “Yes” to register a phone.
zIf 5 Bluetooth® devices have already been
registered, a registered device needs to be
deleted. See “When 5 Bluetooth
® devices
have already been registered” on page
153.
4When this screen is displayed, operate
the Bluetooth
® device.
z Search for the navigation system displayed
on the system’s screen using your
Bluetooth
® device, and register the
Bluetooth® device.
For details about operating the Bluetooth®
device, see the manual that comes with it.
z A passcode is not required for SSP (Secure
Simple Pairing) compatible Bluetooth
®
phones. Depending on the type of
Bluetooth® phone being connected, a
message confirming registration may be
displayed on the Bluetooth
® phone’s
screen. Respond and operate the
Bluetooth
® phone according to the confir-
mation message.
To use the hands-free system, it is neces-
sary to register a phone with the system.
Once the phone has been registered, it
is possible to make a hands-free call.
If a Bluetooth
® phone has not been reg-
istered yet, it is necessary to register it
first according to the following proce-
dure. A Bluetooth
® phone cannot be
registered while driving.
z See “REGISTERING A Bluetooth®
DEVICE” on page 195 of additional reg-
istration when registering.

155
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Connect Phone” .
3Select the screen bu tton corresponding
to the desired phone connection.
z When the cellular phone’s device name has
not been able to be obtained, “Device 1” to
“Device 5” will be displayed in the order the
phones were registered.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
4This screen is displayed.
5When the connection is completed, this
screen is displayed.
z Now you can use the Bluetooth® phone.
X When a phone is connected while
Bluetooth® audio is playing
zThis screen is displayed, and the
Bluetooth® audio will stop temporarily.
MANUALLY
When the auto connection has failed or
“Bluetooth* Power” is turned off, it is
necessary to connect Bluetooth
® man-
ually.

157
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
4. CALL ON THE Bluetooth® PHONE
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Phone” on the “Menu” screen.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select the desired keys to input the
phone number.
zEach time is select ed, an input digit is
deleted.
4Select or press the switch on
the steering wheel.
z Depending on the type of Bluetooth®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
1Select “Contacts” .
2Select the desired data from the list.
After a Bluetooth® phone has been reg-
istered, a call can be made using the
hands-free system. There are 7 methods
by which a call can be made. These are
described below.
BY DIAL
A call can be made by inputting the
phone number.
This cannot be operated while driving.
BY PHONEBOOK
Calls can be made by using the phone-
book data which is transferred from the
registered cellular phone.
The phonebook changes depending on
the phone connected. Up to 1000 con-
tacts (maximum of 3 numbers per con-
tact) can be regi stered in each
phonebook.
This cannot be operated while driving.

158
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3Select the desired number from the list.
4Select or press the switch on
the steering wheel.
1Select “Contacts” .
2Select “Yes” or “Transfer” to automati-
cally transfer the phonebook from the
connected phone.
z Select “Manual” to transfer the phonebook
manually. (See “TRANSFERRING A
PHONE NUMBER” on page 175.)
z Select “No” or “Cancel” to cancel transfer-
ring.
z If your cellular phone is neither PBAP nor
OPP compatible, the phonebook cannot
be transferred.
X PBAP compatible models
X PBAP incompatible but OPP compatible
models
3Transfer the phonebook data to the sys-
tem using the Bluetooth
® phone.
zDepending on the type of cellular phone,
OBEX authentication may be required
when transferring phonebook data. Enter
“1234” into the Bluetooth
® phone.
z This screen appears while transferring. To
cancel this function, select “Cancel” .
WHEN THE PHONEBOOK IS
EMPTY

160
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select “Call History” .
2Select the desired data from the list.
zThe list to be displayed can be changed by
selecting the “All”, “Missed” , “Incoming” or
“Outgoing” tab.
3Select or press the switch on
the steering wheel.BY CALL HISTORY
CALLS CAN BE MADE BY
CALL HISTORY WHICH HAS 4
FUNCTIONS
All : all calls (missed, incoming or outgo-
ing)
Up to 25 call history items can be select-
ed from the “A l l ” tab while driving.
Missed: calls that were missed
Incoming : calls that were received
Outgoing : calls that were made

161
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Press the switch on the steering
wheel to display the “Call History”
screen.
3Press the switch on the steering
wheel to select the latest history item.
4Select or press the switch on
the steering wheel to call the latest his-
tory item.
zWhen making a call by phonebook, the
name (if registered) is displayed.
z When making a call to the same number
continuously, only the most recent call is
listed in call history.
z When a phone number registered in the
phonebook is received, the name and the
number are displayed.
z Number-withheld calls are also memorized
in the system.
z International phone calls may not be made
depending on the type of cellular phone
you have.
CALLS CAN BE MADE USING
THE LATEST CALL HISTORY
ITEMBY VOICE RECOGNITION
Calls can be made by giving a voice
command. (For the operation and com-
mand of voice recognition, see “VOICE
COMMAND SYSTEM” on page 308.)
This can be operated while driving.

163
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zThe system can recognize the following
types of phone numbers:
3 digit numbers (911, 411, 611)
7 digit numbers (Local phone numbers)
10 digit numbers (Area code + Local
phone number)
11 digit phone numbers (1 + Area code +
Local phone number)
z As the system cannot recognize additional
numbers, say the complete number without
stopping.
z When the system recognizes multiple
phone numbers, a phone number candi-
date list will be displayed on the screen. If
the desired phone number is not displayed
on the top of the screen, say the number of
the desired phone number from the candi-
date list (number 1 and number 2) to select
a phone number from the candidate list.
3Say “Dial” to call the phone number.
■INTERNATIONAL CALL
1Go to the “Main Menu” screen by
pressing the talk sw itch on the steering
wheel and saying “Main menu ” or select
“Main Menu” .
2Say “Use a phone” .
3Say “International call” .
zUp to 24 digits can be recognized when
using the internationa l call function. The
number can also be divided into multiple
groups and recognized.
To dial a phone number that is not a 3, 7,
10 or 11 digit number, for example an in-
ternational number, use “International
Call”.
Calling without the voice recognition :
After the desired ph one number is dis-
played, a call can also made by pressing
the switch on the steering wheel.
Canceling the voice recognition : The
voice recognition will be canceled when
either of the following is performed:
• Press and hold the talk switch.
• Select “Cancel” .