Lexus ES300h 2017 Navigation Manual

79
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
2. MAP SCREEN OPERATION
1Press the “MENU” button on the
Remote Touch, then select “Nav” on the
“Menu” screen.
2Check that the current position map is
displayed.
CURRENT POSITION DISPLAY
z To correct the current position manu-
ally:
→P.1 3 5
INFORMATION
●While driving, the cu rrent position mark
is fixed on the screen and the map moves.
● The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
● After the 12-volt battery disconnection,
or on a new vehicle, the current position
may not be correct. As soon as the sys-
tem receives signals from the GPS, the
correct current position is displayed.
ES350_300h_Navi_OM33C79U_(U).book Page 79 Wednesday, June 22, 2016 2:54 PM

80
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
1Select or to change the
scale of the map screen.
zThe scale indicator bar appears at the bot-
tom of the screen.
z Select and hold or to continue
changing the scale of the map screen.
z The scale of the map screen can also be
changed by selecting the scale bar directly.
This function is not available while driving.
1Select on the map screen.
2Check that the footprint map is dis-
played.
zTo return to the normal map display, select
.
MAP SCALE
INFORMATION
●Press the “” button on the Remote
Touch to zoom in on the map screen and
the “” button to zoom out.
● In areas where the footprint map is avail-
able the map scale changes from
to when at the minimum range.
FOOTPRINT MAP
For areas covered by the footprint map
(some major cities), a footprint map on a
scale of 75 ft. (25 m) can be selected.
When the map is scaled down to 150 ft.
(50 m), changes to and can
be selected to display the footprint map.
INFORMATION
● If the map or the current position is
moved to the area which is not covered
by the footprint map, the screen scale
automatically changes to 150 ft. (50 m).
● On the footprint map, a one way street is
displayed by .
● Scrolling on the footpr int map is not avail-
able while driving.
Building footprints in the database were
created and provided by HERE.
ES350_300h_Navi_OM33C79U_(U).book Page 80 Wednesday, June 22, 2016 2:54 PM

81
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3zTo display the normal map, select .
1Select an arrow to rotate. : North-up symbol
Regardless of the direction of vehicle travel,
north is always up.
: Heading-up symbol
The direction of vehicle travel is always up.
: 3D Heading-up symbol
The direction of vehicle travel is always up.
z The letter(s) beside this symbol indicate the
vehicle’s heading direction (e.g. N for
north).
3D CITY MODEL MAP
A 3D city model map can be displayed
for some areas in major cities when the
map scale is 700 ft. (200 m) or less on
the 3D map screen.
INFORMATION
● The 3D city model map can be set the
display on/off. ( →P.1 3 2 )
ROTATING 3D MAP
3D map and 3D city model map can be
rotated when arrows appear around the
cursor while scrolling.
INFORMATION
● The viewing angle of the 3D map can be
changed. ( →P.1 3 5 )
ORIENTATION OF THE MAP
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by se-
lecting the orientation symbol displayed
at the top left of the screen.
ES350_300h_Navi_OM33C79U_(U).book Page 81 Wednesday, June 22, 2016 2:54 PM

82
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
1Select on the map screen.
( → P.78)
2Select “Map Mode” .
3Select the desired configuration button.
zDepending on the conditions, certain
screen configuration buttons cannot be
selected.
SWITCHING THE MAP MODENo.FunctionPage
Select to display the single
map screen. 
Select to display the dual
map screen.83
Select to display the com-
pass mode screen.83
Select to display the turn list
screen.115
Select to display the free-
way exit list screen.113
Select to display the inter-
section guidance screen or
the guidance screen on the
freeway.
115
Select to display the turn-
by-turn arrow screen.116
ES350_300h_Navi_OM33C79U_(U).book Page 82 Wednesday, June 22, 2016 2:54 PM

83
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
■DUAL MAP
1Select any point on the right side map.
2Select the desired item.
zWhen set to on, the indicator will illuminate.
■ COMPASS
The map on the left is the main map.
The right side map can be edited.
No.FunctionPage
Select to change the ori-
entation of the map.81
Select to display POI
icons.86
*Select to show traffic in-
formation. 91
*Select to display eDesti-
nation icons.326
Select to change the map
scale.80
*: This function is not made available on some models.
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
● The destination mark is displayed in the
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
● When the vehicle travels out of the cover-
age area, the guidance screen changes to
the whole compass mode screen.
ES350_300h_Navi_OM33C79U_(U).book Page 83 Wednesday, June 22, 2016 2:54 PM

84
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
zTo scroll over the map screen, place the
cursor mark in the desired position and
then press and hold the Remote Touch
knob. The map will continue scrolling in that
direction until the knob is released.SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the center of the screen for
looking at a point on the map that is dif-
ferent from the current position.
No.Information/Function
Cursor mark
Distance from the current position to
the cursor mark
Select to set as a destination.
When selecting “Go to ” on the
following map screen, the navigation
system performs a search for the
route. ( →P.105)
If a destination has already been set,
“Go to ” and “Add to Route” will
be displayed.
“Go to ” : Select to delete the exist-
ing destination(s) and set a new one.
“Add to Route” : Select to add a des-
tination.
Select to register as a memory point.
To change the icon, name, etc.: →P.126
Select to return to the current posi-
tion.
ES350_300h_Navi_OM33C79U_(U).book Page 84 Wednesday, June 22, 2016 2:54 PM

85
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
1Select one of the 8 directional arrows to
move the cursor to the desired point
and then select “OK”.
zThe cursor can also be moved by briefly
selecting a desired point on the map.
ADJUSTING LOCATION IN
SMALL INCREMENTS
The cursor location can be adjusted in
small increments when “A d j u s t L o c a -
tion” is selected on the setting map
screen.
Also, when changing the location of
memory points on the editing screen
( → P.128) and adjusting the current po-
sition mark manually on the “Calibration”
screen ( →P.135), 8 directional arrows
may appear for this purpose.
ES350_300h_Navi_OM33C79U_(U).book Page 85 Wednesday, June 22, 2016 2:54 PM

86
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
3. MAP SCREEN INFORMATION
1Select on the map screen.
(→ P.78)
2Select “Map Information” .
3Select the desired items to be displayed.
zWhen set to on, the indicator will illuminate.
1Display the “Map Information” screen.
(→ P.86)
2Select “Select POI” .
zWhen the POI icons to be displayed on the
map screen have already been set,
“Change POI” is displayed.
DISPLAYING MAP
INFORMATION
Information such as POI icons, route
trace, speed limit, etc. can be displayed
on the map screen.
No.FunctionPage
Select to display the select-
ed POI icons.
Select to select or change
POI icons.86
*Select to display
eDestination icons.326
Select to display route
trace.88
*Select to display traffic in-
formation.91
Select to display speed limit
icon.
*: This function is not made available on some models.
SELECTING THE POI ICONS
No.FunctionPage
ES350_300h_Navi_OM33C79U_(U).book Page 86 Wednesday, June 22, 2016 2:54 PM

87
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
3Select the desired POI category and se-
lect “OK” .■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POIs” .
2Select the desired POI categories and
select “OK”.
“List All Categories” : Select to display all
POI categories. To add more POI catego-
ries, select “More”.
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen.−
Select to cancel the select-
ed POI icons.−
Displays up to 6 POI icons
as favorite POI categories134
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
87
Select to search for the
nearest POIs.88
ES350_300h_Navi_OM33C79U_(U).book Page 87 Wednesday, June 22, 2016 2:54 PM

88
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
■DISPLAYING THE LOCAL POI
LIST
1Select “Find Local POI” .
2Select the desired POI.
“Near...” : Select to search for POIs near the
current position or along the route.
3Check that the selected POI is dis-
played on the map screen.
X When “Near...” is selected
1Select the desired item.
■START RECORDING THE ROUTE
TRACE
1Display the “Map Information” screen.
(→ P.86)
2Select “Route Trace”.
zThe “Route Trace” indicator illuminates and
the route trace starts.
3Check that the traveled line is displayed.
POIs that are within 20 miles (32 km) of
the current position will be listed from
among the selected categories.
No.Function
Select to search for POIs near the
current position.
Select to search for POIs along the
route.
ROUTE TRACE
The traveled route can be stored and re-
traced on the map screen. This feature is
available when the map scale is 30 miles
(50 km) or less.
ES350_300h_Navi_OM33C79U_(U).book Page 88 Wednesday, June 22, 2016 2:54 PM