stop start Lexus GS350 2007 Using the hands-free system / LEXUS 2007 GS430/350 QUICK REFERENCE MANUAL

Topic 1
Entering and Exiting
7
Keys
nElectronic key
lLocks and unlocks the doors
lOpens the trunk
lStarts and stops the engine
nMechanical key
lLocks and unlocks the doors
lOpens the trunk
lLocks and unlocks the glove box
The mechanical key is stored inside the electronic
key. To extract the key, release the latch and pull.
nWireless remote control
Locks the doors
Unlocks the doors
Opens the trunk
Sounds the alarm
(To stop the alarm, push any button on the
wireless remote control.)1
2
3
4
The wireless remote control can also be used to open the windows and moon roof.
To do so, simply press and hold button.

Topic 1
Entering and Exiting
9
Anti-theft System
nEngine immobilizer system
The engine immobilizer system prevents the
engine from being started in the event that an
attempt is made to start the vehicle using an
unregistered key.
The security indicator light flashes to indicate that
the system is set.
nAlarm
When forcible entry is detected, the alarm
attracts attention to the vehicle by sounding the
horn and flashing the exterior lights.
When all the doors are locked, the security indi-
cator light comes on and begins to flash after
approximately 30 seconds to indicate that the
system is armed.
nSteering lock
The steering lock is engaged when the driver’s
door is opened with the engine switch OFF.
The anti-theft system includes the following features to help protect your vehicle from theft.
ILYQ1A001
To stop the alarm, start the engine or unlock the doors or trunk using the entry function or
the wireless remote control. (The alarm will stop after several seconds.)
ILYQ1A002

Topic 3
When Driving
17
Starting
nStarting the engine
Make sure the parking brake is engaged and the
shift lever is in P.
Depress the brake pedal.
The engine switch indicator light turns
green.
Press the engine switch.
nStopping the engine
Engage the parking brake and shift the shift lever to P.
Press the engine switch.
nChanging power modes
To change power modes without turning on the engine, press the engine switch without
depressing the brake pedal. The modes can be changed in the following order:
With the electronic key on your person, the engine can be started by simply pressing the
engine switch, while depressing the brake pedal.
(The mechanical key cannot be used to start the engine.)
ILYQ3A001
ILYQ3A002
ACC modeIG-ON mode
(Indicator light: amber) OFF mode
(Indicator light: off)