display Lexus GX460 2014 Navigation Manual

313
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX_EMVN_OM60K84U_(U)13.07.02 11:50
7
PHONE
6. Bluetooth® PHONE MESSAGE FUNCTION
1Press the button.
2Select .
zThe phone top screen can be displayed by
pressing the
switch on the steering
wheel.
3Check that the message inbox screen is
displayed.
: Select to change to phone mode.
Received messages can be forwarded
from the connected Bluetooth
® phone,
enabling checking and replying using
the navigation system.
Depending on the type of Bluetooth
®
phone connected, received messages
may not be transferred to the message
inbox.
If the phone does not support the mes-
sage function, this function cannot be
used.
FunctionPage
Receiving a message314
Checking messages315
Replying to a message (quick reply)316
Calling the message sender318
Message settings333
GX_EMVN_OM60K84U_(U).book Page 313 Tuesday, July 2, 2013 11:51 AM

314
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX_EMVN_OM60K84U_(U)13.07.02 11:50
RECEIVING A MESSAGE
When an e-mail/SMS/MMS is re-
ceived, the incoming message screen
pops up with sound and is ready to be
operated on the screen.
No.Function
Select to check the message.
Select to not open the message.
Select to call th e message sender.
INFORMATION
●
Depending on the cellular phone used for
receiving messages, or its registration
status with the navigation system, some
information may not be displayed.
●The pop up screen is separately available
for incoming e-mail and SMS/MMS mes-
sages under the follo wing conditions:
E-mail:
• “Incoming E-mail Display” is set to “Full
Screen”. ( →P. 3 3 3 )
• “E-mail Notification Popup” is set to on. (→ P. 3 3 3 )
SMS/MMS:
• “Incoming SMS/MMS Display” is set to “Full screen”. ( →P. 3 3 3 )
• “SMS/MMS Notification Popup” is set to on. ( →P. 3 3 3 )
GX_EMVN_OM60K84U_(U).book Page 314 Tuesday, July 2, 2013 11:51 AM

315
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
7
PHONE
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Display the message inbox screen.
(→ P.313)
2Select the desired me ssage from the list.
3Check that the message is displayed.
CHECKING MESSAGES
No.Function
Select “Mark Unread” or “Mark
Read” to mark mail unread or read
on the message inbox screen.
This function is available when
“Update Message Read Status on
Phone” is set to on. ( →P.333)
Select to reply the message.
(→ P.316)
Select to display the previous or next
message.
Select to have messages read out.
To cancel this function, select “Stop”.
When “Automatic Message Read-
out” is set to on, messages will be au-
tomatically read out. ( →P.333)
Select to make a call to the sender.
INFORMATION
●
Reading a text message is not available
while driving.
●Depending on the ty pe of Bluetooth®
phone being connected, it may be
necessary to perform additional steps on
the phone.
●Messages are displayed in the
appropriate connected Bluetooth®
phone’s registered mail address folder.
Select the tab of the desired folder to be
displayed.
●Only received messages on the
connected Bluetooth® phone can be
displayed.
●The text of the message is not displayed
while driving.
●Tu r n t h e “PWR·VOL” knob, or use the
volume control switch on the steering
wheel to adjust the message read out
volume.
GX_EMVN_OM60K84U_(U).book Page 315 Tuesday, July 2, 2013 11:51 AM

316
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Display the message inbox screen.
(→ P.313)
2Select the desired me ssage from the list.
3Select “Quick Msg” .
4Select the desired message.
5Select “Send” .
zWhile the message is being sent, a sending
message screen is displayed.
z To cancel sending the message, select
“Cancel” .
6Check that a confirma tion screen is dis-
played when the operation is complete.
z If an error message is displayed, follow the
guidance on the screen to try again.
REPLYING TO A MESSAGE
(QUICK REPLY)
15 messages have already been stored.
GX_EMVN_OM60K84U_(U).book Page 316 Tuesday, July 2, 2013 11:51 AM

318
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX_EMVN_OM60K84U_(U)13.07.02 11:50
■CALLING FROM E-MAIL/SMS/
MMS MESSAGE DISPLAY
1Display the message inbox screen.
(→ P.313)
2Select the desired message.
3Select .
zIf there are 2 or more phone numbers,
select the desired number.
4Check that the “Call” screen is dis-
played.
■ CALLING FROM A NUMBER
WITHIN A MESSAGE
1Display the messag e inbox screen.
( → P.313)
2Select the desired message.
3Select the text area.
4Select the desired number.
zIdentified phone numbers contained in the
message are displayed.
CALLING THE MESSAGE
SENDER
Calls can be made to an e-mail/SMS/
MMS message sender’s phone number.
This operation can be performed while
driving.
Calls can be made to a number identi-
fied in a message’s text area.
This operation cannot be performed
while driving.
GX_EMVN_OM60K84U_(U).book Page 318 Tuesday, July 2, 2013 11:51 AM

320
GX_EMVN_OM60K84U_(U)13.07.02 11:50
2. SETUP
1. PHONE/MESSAGE SETTINGS
1Press the “SETUP” button on the
Remote Touch.
2Select “Phone” .
3Select the item to be set.
PHONE/MESSAGE SETTINGS
SCREEN
No.InformationPage
Registering/connecting a
phone 40
Sound settings321
Contact/call history set-
tings322
Messaging settings333
Phone display settings335
GX_EMVN_OM60K84U_(U).book Page 320 Tuesday, July 2, 2013 11:51 AM

321
2. SETUP
7
PHONE
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Display the phone top screen.
(→ P.303)
2Select “Settings” .
1Display the “Phone/Message Settings”
screen. (→P.320)
2Select “Sound Settings” .
3 Select the desired item to be set.
DISPLAYING THE PHONE/
MESSAGE SETTINGS SCREEN
IN A DIFFERENT WAY“Sound Settings” SCREEN
The call and ringtone volume can be ad-
justed. A ringtone can be selected.
GX_EMVN_OM60K84U_(U).book Page 321 Tuesday, July 2, 2013 11:51 AM

322
2. SETUP
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Display the “Phone/Message Settings”
screen. (→P.320)
2Select “Contact/Call History Set-
tings” .
3Select the desired item to be set.
No.Function
Select to set the desired ringtone.
Select “-” or “+” to adjust the ring-
tone volume.
Select “-” or “+” to adjust the mes-
sage readout volume.
Select to set the desired incoming
SMS/MMS tone.
Select “-” or “+” to adjust the incom-
ing SMS/MMS tone volume.
Select to set the desired incoming e-
mail tone.
Select “-” or “+” to adjust the incom-
ing e-mail tone volume.
Select “-” or “+” to adjust the default
volume of the other party’s voice.
Select to reset all setup items.
INFORMATION
●
Depending on the type of phone, certain
functions may not be available.
“Contact/Call History Settings”
SCREEN
The contact can be transferred from a
Bluetooth
® phone to the system. The
contact also can be added, edited and
deleted.
The call history can be deleted and con-
tact and favorites can be changed.
GX_EMVN_OM60K84U_(U).book Page 322 Tuesday, July 2, 2013 11:51 AM

323
2. SETUP
7
PHONE
GX_EMVN_OM60K84U_(U)13.07.02 11:50
*: For PBAP compatible Bluetooth®
phones, this function is available when “Au-
tomatic Contact/History Transfer” is set to
off. ( →P.322)
zDepending on the type of phone, certain
functions may not be available.
z Contact data is managed independently
for every registered phone. When one
phone is connected, another phone’s regis-
tered data cannot be read.No.FunctionPage
For PBAP compatible
Bluetooth® phones, select
to set automatic contact/
history transfer on/off.
When set to on, the phone’s
contact data and history are
automatically transferred.

Select to update contacts
from the connected phone.324
Select to sort contacts by
the first name or last name
field.
Select to add contacts to
the favorites list. 330
Select to delete contacts
from the favorites list. 332
Select to set the transferred
contact image display on/
off.

*Select to clear contacts
from the call history.
*Select to add new contacts
to the contact list.326
*Select to edit contacts in
the contact list.327
*Select to delete contacts
from the contact list.329
Select to reset all setup
items.
GX_EMVN_OM60K84U_(U).book Page 323 Tuesday, July 2, 2013 11:51 AM

325
2. SETUP
7
PHONE
GX_EMVN_OM60K84U_(U)13.07.02 11:50
3Transfer the contact data to the system
using a Bluetooth
® phone.
zThis operation may be unnecessary
depending on the type of cellular phone.
z Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
® phone.
z To cancel this function, select “Cancel”.
4Select “Done” when it appears on the
screen.
5Check that a confirma tion screen is dis-
played when the operation is complete.
■ UPDATING THE CONTACTS IN A
DIFFERENT WAY (FROM THE “Call
History” SCREEN)
1Display the phone top screen.
(→ P.303)
2Select the “Call History” tab and select
a contact not yet registered in the con-
tact list.
3Select “Update Contact” .
For PBAP compat ible Bluetooth®
phones, this function is available when
“Automatic Contact/History Transfer”
is set to off.
(→P.322)
GX_EMVN_OM60K84U_(U).book Page 325 Tuesday, July 2, 2013 11:51 AM