Lexus GX460 2014 Navigation Manual

50
2. Bluetooth® SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
■RECONNECTING THE Bluetooth®
PHONE
zIf a Bluetooth® phone is disconnected on
purpose, such as turning it off, this does not
happen. Reconnect the Bluetooth
® phone
manually.
1Display the “Bluetooth* Setup” screen.
( → P.45)
2Select the desired de vice to be edited.
3Select “Device Info” .
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth
® network when the engine
switch is in ACCESSORY or IGNI-
TION ON mode, the system automati-
cally reconnects the Bluetooth
® phone.
EDITING THE Bluetooth®
DEVICE INFORMATION
The Bluetooth® device’s information
can be displayed on the screen. The dis-
played information can be edited.
GX_EMVN_OM60K84U_(U).book Page 50 Tuesday, July 2, 2013 11:51 AM

51
2. Bluetooth® SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
2
BASIC FUNCTION
4Confirm and change the Bluetooth®
device information.
No.Information
The name of the Bluetooth® device.
Can be changed to a desired name.
( → P.52)
Select to set the Bluetooth® audio
player connection method. ( →P.52)
Device address is unique to the de-
vice and cannot be changed.
Phone number of the Bluetooth®
phone.
Compatibility profile of the
Bluetooth® device.
Select to reset all setup items.
INFORMATION
●
If 2 Bluetooth® devices have been regis-
tered with the same device name, the
devices can be distinguished referring to
the device’s address.
●Depending on the type of phone, some
information may not be displayed.
GX_EMVN_OM60K84U_(U).book Page 51 Tuesday, July 2, 2013 11:51 AM

52
2. Bluetooth® SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Select “Device Name”.
2Enter the name and select “OK”.1Select “Connect Audio Player from” .
2Select the desired connection method.
“Vehicle”: Select to connect the audio sys-
tem to the audio player.
“Device” : Select to connect the audio play-
er to the audio system.
z Depending on the audio player, the “Vehi-
cle” or “Device” connection method may
be best. As such, refer to the manual that
comes with the audio player.
z To reset the connection method, select
“Default” .
CHANGING A DEVICE NAME
INFORMATION
●
Even if the device name is changed, the
name registered in your Bluetooth®
device does not change.
SETTING AUDIO PLAYER
CONNECTION METHOD
GX_EMVN_OM60K84U_(U).book Page 52 Tuesday, July 2, 2013 11:51 AM

53
2. Bluetooth® SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
2
BASIC FUNCTION
1Display the “Bluetooth* Setup” screen.
(→ P.45)
2Select “System Settings” .
3Select the desired item to be set.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
“System Settings” SCREEN
The Bluetooth® settings can be con-
firmed and changed.
No.InformationPage
Select to set Bluetooth®
connection on/off.54
Displays system name. Can
be changed to a desired
name.
54
PIN-code used when the
Bluetooth® device was
registered. Can be
changed to a desired code.54
Device address is unique to
the device and cannot be
changed.

Select to set the phone con-
nection status display on/
off.

Select to set the connection
status display of the audio
player on/off.
Compatibility profile of the
system.
Select to reset all setup
items.
GX_EMVN_OM60K84U_(U).book Page 53 Tuesday, July 2, 2013 11:51 AM

54
2. Bluetooth® SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Select “Bluetooth* Power”.
When “Bluetooth* Power” is on :
The Bluetooth
® device is automatically
connected when the engine switch is in AC-
CESSORY or IGNITION ON mode.
When “Bluetooth* Power” is off :
The Bluetooth
® device is disconnected,
and the system will not connect to it next
time.
1Select “Bluetooth* Name” .
2Enter a name and select “OK”.
1Select “Bluetooth* PIN” .
2Enter a PIN-code and select “OK”.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
CHANGING “Bluetooth*
Power”
INFORMATION
●
While driving, the auto connection state
can be changed from off to on, but can-
not be changed from on to off.
EDITING THE SYSTEM NAME
EDITING THE PIN-CODE
GX_EMVN_OM60K84U_(U).book Page 54 Tuesday, July 2, 2013 11:51 AM

55
GX_EMVN_OM60K84U_(U)13.07.02 11:50
2
BASIC FUNCTION
3. OTHER SETTINGS
1. GENERAL SETTINGS
1Press the “SETUP” button.
2Select “General” .
3Select the items to be set.
Settings are availabl e for auto screen
change, operation sounds, etc.GENERAL SETTINGS SCREEN
No.Function
Select to change the time zone and
set the daylight saving time and auto-
matic adjustment of the clock by GPS
on/off. ( →P.56)
Select to chang e the language.
Select to change the unit of measure
for distance.
GX_EMVN_OM60K84U_(U).book Page 55 Tuesday, July 2, 2013 11:51 AM

56
3. OTHER SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Display the “General Settings” screen.
(→ P.55)
2Select “Clock” .
3Select the items to be set.
Select to set the sound beeps on/off.
Select to change the screen button
color.
Select to change the keyboard lay-
out.
Select to customize the startup/
screen off images. ( →P.58)
Select to set automatic screen
changes from the audio/air condi-
tioning control screen to the previous
screen to on/off. When set to on, the
screen will automatically return to the
previous screen from the audio/air
conditioning control screen after 20
seconds.
Select to delete personal data.
( → P.61)
Select to update software versions.
For details, contact your Lexus deal-
er.
Select to update “Gracenote” data-
base versions. For details, contact
your Lexus dealer.
Select to display the software infor-
mation. Notices related to third party
software used in this product are en-
listed. (This includes instructions for
obtaining such software, where appli-
cable.)
No.FunctionCLOCK SETTINGS
Used for changing time zones and the
on/off settings of daylight saving time
and automatic adjustment of the clock
by GPS.
No.Function
Select to change the time zone.
( → P.57)
Select to set daylight saving time on/
off.
Select to set auto matic adjustment of
the clock by GPS on/off. When set to
on, the system will automatically ad-
just the clock to the current position’s
time zone when the vehicle moves to
a different time zone.
When “Auto Adjust by GPS” is
turned off, the clock can be manually
adjusted. ( →P.57)
GX_EMVN_OM60K84U_(U).book Page 56 Tuesday, July 2, 2013 11:51 AM

57
3. OTHER SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
2
BASIC FUNCTION
■SETTING THE TIME ZONE
1Select “Time Zone” .
2Select the desired time zone.
zIf “Other ” is selected, the zone can be
adjusted manually. Select “+” or “-” to
adjust the time zone.
■ MANUAL CLOCK SETTING
1Display the “Clock” screen. ( → P.56)
2Select the items to be set.
*: e.g. 1:00 to 1:29 → 1:00
1:30 to 1:59 → 2:00
When “A u t o A d j u s t b y G P S ” is turned
“Off” , the clock can be manually adjust-
ed.
No.Function
Select “+” to set the time forward one
hour and “-” to set the time back one
hour.
Select “+” to set the time forward one
minute and “-” to set the time back
one minute.
Rounds to the nearest hour*.
GX_EMVN_OM60K84U_(U).book Page 57 Tuesday, July 2, 2013 11:51 AM

58
3. OTHER SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1Display the “General Settings” screen.
(→ P.55)
2Select “Customize Images” .
3Select the items to be set.
CUSTOMIZING THE STARTUP
AND SCREEN OFF IMAGES
An image can be copied from a USB
memory and used as the startup and
screen off Images.
When the engine switch is in
ACCESSORY or IGNITION ON
mode, the initial screen will be displayed.
(→ P.28)
When “Screen Off” on the “Display”
screen is selected, the screen is turned
off and the desired screen off image that
is set is displayed. (To turn the screen off:
→ P.38)
No.FunctionPage
Select to copy images from
a USB memory.59
Select to delete images.61
Select to set an image as the
startup or screen off image.60
GX_EMVN_OM60K84U_(U).book Page 58 Tuesday, July 2, 2013 11:51 AM

59
3. OTHER SETTINGS
GX_EMVN_OM60K84U_(U)13.07.02 11:50
2
BASIC FUNCTION
■TRANSFERRING IMAGES
1Slide the auxiliary box lid.
2Open the cover and connect a USB
memory.
zTurn on the power of the USB memory if it
is not turned on.
3Select “Copy from USB” .
4Select the desired images from the list
and then select “Copy”.
zThe selected image is displayed on the
right side of the screen. If the selected
image file is broken or incompatible,
will be displayed.
z The remaining number of image files that
can be transferred is displayed at the bot-
tom of the screen.
5Select “Yes” when the confirmation
screen appears.
GX_EMVN_OM60K84U_(U).book Page 59 Tuesday, July 2, 2013 11:51 AM