Lexus HS250h 2012 Navigation Manual

SETUP
330
U10045LC
6. Select the desired group.
If the desired POI category is not on the
screen, select“List All Categories” to list
all POI categories.
U10046LC
7. Select the desired category.
8. Select “OK”.
DScreen layout function (“ AAOff”
function)
Each screen buttons and current street
name on the map screen can be displayed
or hidden.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10047LC
4. Select “ AAOff” Function”.
U10048LC
5. Select the button to be turned off.
The button becomes dimmed.
To set the default, select “Default”.
6. Select “Save”.
11 08.03HS250h_NAVI_U
75051U

SETUP
331
D
Current position/tire change cal-
ibration
The current vehicle position mark can be
adjusted manually. Miscalculation of the
distance caused by tire replacement can
also be adjusted.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10049LC
4. Select “Calibration”.
U10050LC
5. Select the desired button.
INFORMATION
For additional information on the ac-
curacy of a current vehicle position,
see “Limitations of the navigation
system” on page 392.
POSITION/DIRECTION CALIBRATION
When driving, the current vehicle position
mark will be automatically corrected by
GPS signals. If GPS reception is poor due
to location, you can manually adjust the
current vehicle position mark.
U10051LC
1. Select “Position / Direction”.
U10052LC
2. Select the 8 directional button to
move the cursorto the desired point
on the map.
3. Select “OK”.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
332
U10053LC
4. Select either theorto ad-
just the direction of the current vehicle
position mark.
5. Select “OK”.
The map will be displayed. TIRE CHANGE CALIBRATION
The tire change calibration function will be
used when replacing the tires. This func-
tion will adjust the miscalculation caused
by the circumference difference between
the old and new tires. If this procedure is
not performed when the tires are replaced,
the current vehicle position mark may be
incorrectly displayed.
U10054LC
To perform a distance calibration pro-
cedure, select “Tire Change” on the
“Calibration” screen.
The message appears and the quick dis-
tance calibration is automatically started.
A few seconds later, a map will be dis-
played.
11 08.03HS250h_NAVI_U
75051U

SETUP
333
D
Pop−
up information
When the “Pop −up information” is turned
on, the pop −up information will be dis-
played.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Navi.” on the “Setup”
screen.
3. Select “Detailed Navi. Settings” on
the “Navigation Settings” screen.
U10055LC
4. Select “Pop− up Information”.
U10056LC
5. Select “On” or “Off”.
6. Select “Save”. When the “Pop
−up Information” is turned
off, the following messages will not be dis-
played.
U10057LC
This message appears when the system is
in the POI mode and the map scale is over
0.5 miles (1 km).
U10058LC
The message appears when the map is
switched to the dual map screen mode.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
334
“Telephone settings” can be changed
on the “Phone settings” screen.
U0002AASLY
1. Push the “MENU” button on the Re-
mote Touch.
2. Select “Setup”.
3. Select “Phone”.
U10075LC
Please refer to the following pages for
each setting.
11 08.03HS250h_NAVI_U
75051U
Telephone settings —

SETUP
335
You can adjust the voice and ring vol-
ume.
U10076LC
1. Select “Volume”.
U10077LC
2. Change each setting according to
the following procedures.
3. When you complete all settings, se-
lect “Save”.
Automatic volume settings for high
speed
The system will automatically increase the
volume by one step up when the speed ex-
ceeds 50 mph (80 km/h).
DVoice volume setting
1. Select “Voice Volume”.
U10078LC
2. Select “–”or“+” to adjust the voice
volume.
3. Select “OK”.
DRing volume setting
1. Select “Ring Volume”.
U10079LC
2. Select “–”or“+” to adjust the ring
volume.
3. Select “OK”.
11 08.03HS250h_NAVI_U
75051U
—
Volume setting
12

SETUP
336
D
Initializing the settings
You can initialize the settings.
1. Select “Default”.
U10080LC
2. Select “Yes”. “Manage phone” is accessed from the
“Connect Phone” screen.
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Setup”.
3. Select “Phone”.
U10081LC
4. Select “Manage Phone”.
U10082LC
Please refer to the following pages for
each setting.
11 08.03HS250h_NAVI_U
75051U
— Manage phone

SETUP
337
D
Registering a Bluetooth
rphone
U10083LC
1. Select “(add new)” to register your
cellular phone to the system.
U10005LI
2. When this screen is displayed, input
the passcode displayed on the screen
into the phone.
For the operation of the phone, see the
manual that comes with your cellular
phone.
If you want to cancel it, select “Cancel”.
U10006LI
3. When the connection is completed,
this screen is displayed.
You do not need to enter the phone in case
of using the same one.
U10007LI
When this screen is displayed, follow the
guidance on the screen to try again.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
338
When another Bluetoothrdevice is
connected
U10087LC
When another Bluetooth rdevice is cur-
rently connected, this screen is displayed.
If you want to disconnect it, select “Yes”.
INFORMATION
When you register your phone,
Bluetooth raudio will disconnect. It
will reconnect automatically when
you finish registration. It will not be
reconnected depending on the phone
you are using.
You can also register a new Bluetooth r
phone in the following way.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Phone”.
3. Select “Manage Phone”.
U10088LC
4. Select “Options”.
U10089LC
5. Select “New Phone”.
11 08.03HS250h_NAVI_U
75051U

SETUP
339
U10090LC
6. Select “(empty)” to register your
cellular phone to the system.
The following operations are the same
as the operation after you select “(add
new)”.
DSelecting a Bluetoothrphone
In case you register more than one
Bluetooth rphone, you need to choose
a favorite one.
You can select the Bluetooth rphone
from a maximum of 4 numbers.
“(add new)” is displayed when you have
not registered a Bluetooth rphone yet.
Although you can register up to 4
Bluetooth rphones in the system, only one
Bluetooth rphone can function at a time.
U10091LC
1. Select the phone to connect.
The Bluetooth rmark is displayed when
you connect the phone.
11 08.03HS250h_NAVI_U
75051U
12