service Lexus IS200t 2017 Navigation Manual

307
1. CONNECTED SERVICES
CONNECTED SERVICES
IS_NAVI_EE
8
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a USB
memory.
zTurn on the power of the USB memory if it
is not turned on.
3Close the console box.
INFORMATION
●
Setting “Automatic memory point down-
load” to “Yes” will automatically download
external points. ( →P. 3 1 7 )
• If a screen related to a memory point is changed to before automatic memory
point download begins, automatic
memory point download will be can-
celled.
●If memory points which have the same
name are already stored in the system,
the system may not update those mem-
ory points.
PROCEDURE FOR
DOWNLOADING MEMORY
POINTS AND ROUTES FROM
A USB MEMORY

308
1. CONNECTED SERVICES
IS_NAVI_EE
4Display the “My memory” screen.
(→ P.306)
5Select “Copy from USB” .
zIf a password has already been set, enter
the password. For instructions on setting a
password: →P.1 3 6
z If there are multiple memory points stored
on the USB memory, select the memory
points and routes to be copied and select
“Start” .
6Check that a progress bar is being dis-
played while the data copy is in
progress.
zTo cancel this function, select “Cancel”.
7Check that a confirmation screen is dis-
played when the operation is complete.
NOTICE
●Depending on the size and shape of the
device that is connected to the system,
the console box may not close fully. In this
case, do not forcibly close the console
box as this may damage the device or the
terminal, etc.
INFORMATION
●
Memory points that are located outside
of the map’s data range cannot be regis-
tered.
●A maximum of 500 memory points can
be registered.
●When there are 21 or more memory
points and routes stored on a USB mem-
ory, only 20 memory points and routes
will be displayed at a time.
●Memory points acquired from Lexus por-
tal site can only be registered with the
registered system at the time of acquire-
ment.
●In some cases, memory points and routes
may not be able to be imported. If this
occurs, “Unable to read memory point
data. (Device ID error)” will be displayed.
●If memory points and routes which have
the same name are already stored in the
system, the system may not update those
memory points and routes.

309
1. CONNECTED SERVICES
IS_NAVI_EE
CONNECTED SERVICES
8
5. Street View
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Street View” .
4Select the desired item to search for a
point.
“Address” : Select to set a Street View loca-
tion by address or location.
“Previous destinations” : Select to set a
Street View location by a previously select-
ed destination. ( →P.104)
“Current position” : Select to set a Street
View location by using the current position.
“Map” : Select to set a Street View location
by using the last displayed map.
Destination: Select to set a Street View lo-
cation by using a current destination.
5Check that the picture is displayed.
“”, “ ”: Select to change pictures. Up to 6
pictures per location can be displayed.
The Street View of the desired location
can be viewed, provided the system is
connected to the internet. ( →P.301)INFORMATION
●
The Street View function can also be
selected from the following screens:
• Entire route map screen ( →P.111)
• Online search result screen ( →P. 3 0 3 )
●This function is not available while driving.

310
1. CONNECTED SERVICES
IS_NAVI_EE
6. Panoramio
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Panoramio” .
4Select the desired item to search for a
point.
“Address” : Select to set a location by ad-
dress. ( →P.101)
“Current position” : Select to set a location
by using the current position.
“Map” : Select to set a location by using the
last displayed map.
Destination: Select to set a location by using
a current destination.
5Scroll the map to the desired point
( → P.88) and select .
Users’ pictures on a map, comments
and other information can be viewed,
provided the system is connected to the
internet. ( →P.301)

311
1. CONNECTED SERVICES
CONNECTED SERVICES
IS_NAVI_EE
8
6Check that the thumbnails screen is dis-
played.: Select to display the selected picture’s
title bar.
“Info” Select to display the selected picture
in full screen.
: Select to magnify or reduce
the map scale.
: Select to display the previous 6 pic-
tures.
: Select to update the thumbnails
screen. Up to 6 pictures are displayed.
: Select to download up to another 6
pictures when there are more than 6 pic-
tures available.■ VIEWING A FULL SCREEN PIC-
TURE
1Select “Info” on the title bar.
2Check that a full screen view of the pic-
ture is displayed.
“Detail” : Select to view user comments.
“Enter ” : Select to set as a destination.
( → P.109) If a destination has already been
set, “Add to ” and “Replace ” will be dis-
played.
• “Add to ” : Select to add a destination.
• “Replace ” : Select to delete the existing
destination(s) and set a new one.
INFORMATION
●
This function is not available while driving.

312
1. CONNECTED SERVICES
IS_NAVI_EE
7. WEATHER
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Weather” .
4Check that the “Weather” screen is dis-
played.
“Change location” : Select to change the lo-
cation of weather information.( →P.313)
“Forecast” : Select to display the weather
forecast for the next 5 days.
: Select to update the weather infor-
mation.Weather information for a desired loca-
tion can be displayed, provided the sys-
tem is connected to the internet.
( → P.301)

313
1. CONNECTED SERVICES
CONNECTED SERVICES
IS_NAVI_EE
8
1Select “Change location” on the
“Weather” screen. ( →P.312)
2Select the desired item to search for a
point.
“Town” Select to set a location by town.
( → P.313)
“Destinations” : Select to set a location by
using a current destination.
“Favorites” : Select to set a location by
favourites. ( →P.313)
“Current position” : Select to set a location
by using the current position.
“Map” : Select to set a location by using the
last displayed map.
“Home” : Select to set a location by home.
To use this function, it is necessary to regis-
ter a home address. ( →P.125)
“1 - 5” : Select to set a location by quick ac-
cess. To use this function, it is necessary to
register quick access. ( →P.126)
1Select “Town” .
2Select the desired item.
“Country” : Select to enter the country
name.
“Town” : Select to enter the town name.
“History” : Select to set a previously set
town.
1Select “Favorites” .
2Select the desired location.
“(Add new)” : Select to register a new loca-
tion.( →P.314)
“Delete” : Select to delete favourites.
CHANGING LOCATIONSETTING BY TOWN
SETTING BY FAVOURITES

314
1. CONNECTED SERVICES
IS_NAVI_EE
■REGISTERING FAVOURITES
1Select “(Add new)” .
2Select the desired item.
“Country” : Select to enter the country
name.
“Town” : Select to enter the town name.
“History” : Select to set a previously set
town.
INFORMATION
●
Up to 10 locations can be registered as
favourites.

315
1. CONNECTED SERVICES
IS_NAVI_EE
CONNECTED SERVICES
8
8. FUEL PRICE
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Fuel price” .
4Select the desired brand of petrol sta-
tion.
“Change location” : Select to change the lo-
cation of fuel price information. ( →P.316)
“Sort” : Select to sort by price, distance or
brand.
“Type” : Select to change the fuel type.
“Map” : Select to display the list with map.
: Select to update fuel price informa-
tion.Fuel price information for a desired lo-
cation can be displayed, provided the
system is connected to the internet.
( → P.301)

316
1. CONNECTED SERVICES
IS_NAVI_EE
5Check that the fuel price information is
displayed.
“Detail” : Select to display detailed informa-
tion.
“Enter ” : Select to set as a destination.
( → P.109) If a destination has already been
set, “Add to ” and “Replace ” will be dis-
played.
• “Add to ” : Select to add a destination.
• “Replace ” : Select to delete the existing
destination(s) and set a new one.
1Select “Change location” on the “Fuel
prices” screen. ( →P.315)
2Select the desired item to search for a
point.
“Destinations” : Select to set a location by
using a current destination.
“Previous destinations” : Select to set a lo-
cation by using a previous destination.
“Current position” : Select to set a location
by using the current position.
“Map” : Select to set a location by using the
last displayed map.
“Home” : Select to set a location by home.
To use this function, it is necessary to regis-
ter a home address. ( →P.125)
“1 - 5” : Select to set a location by quick ac-
cess. To use this function, it is necessary to
register quick access. ( →P.126)
CHANGING LOCATION