Lexus IS250 2014 Navigation Manual

361
2. SETUP
IS300h/250_Navi_EE
TELEPHONE
7
XWhen 14 contacts have already been
registered to the favourites list
1When 14 contacts have already been
registered to the favourites list, a regis-
tered contact needs to be replaced.
Select “Yes” when the confirmation
screen appears to replace a contact.
2Select the contact to be replaced.
3Check that a confirmation screen is dis-
played when the operation is complete.
■REGISTERING CONTACTS IN
THE FAVOURITES LIST IN A DIF-
FERENT WAY
XFrom the “Contacts” screen
1Display the telephone top screen.
(→P.329)
2Select “Contacts”.
3Select œ (grey) at the beginning of the
desired contact list name to be regis-
tered in the favourites list.
zWhen selected, œ (grey) is changed to
(yellow), and the contact is registered in the
favourites list.
XFrom the “Contact details” screen
1Display the telephone top screen.
(→P.329)
2Select “Contacts” or “Call history” and
select the desired contact.
3Select “Add favourite”.
4Check that a confirmation screen is dis-
played when the operation is complete.
IS_Navi_EE_53C71E.book 361 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

362
2. SETUP
IS300h/250_Navi_EE
1Select “Remove”.
2Select the desired contact and select
“Remove”.
3Select “Yes” when the confirmation
screen appears.
4Check that a confirmation screen is dis-
played when the operation is complete.
■DELETING CONTACTS IN THE
FAVOURITES LIST IN A DIFFER-
ENT WAY
XFrom the “Contacts” screen
1Display the telephone top screen.
(→P.329)
2Select “Contacts”.
3Select (yellow) at the beginning of
the contact list name to be deleted from
the favourites list.
zWhen selected, (yellow) is changed to
œ (grey), and the data is deleted from the
list.
XFrom the “Contact details” screen
1Display the telephone top screen.
(→P.329)
2Select “Contacts”, “Call history” or
“Favourites” and select the desired
contact to delete.
3Select “Remove favourite”.
4Select “Yes” when the confirmation
screen appears.
5Check that a confirmation screen is dis-
played when the operation is complete.
DELETING THE CONTACTS IN
THE FAVOURITES LIST
IS_Navi_EE_53C71E.book 362 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

363
2. SETUP
IS300h/250_Navi_EE
TELEPHONE
7
1Display the “Contacts” screen.
(→P.353)
2Select “Delete call history”.
3Select the desired history.
4Select the desired contact and select
“Delete”.
5Select “Yes” when the confirmation
screen appears.
6Check that a confirmation screen is dis-
played when the operation is complete.
■DELETING CALL HISTORY IN A
DIFFERENT WAY
1Display the telephone top screen.
(→P.329)
2Select “Call history” and select the de-
sired tab.
3Select “Delete”.
4Follow the steps in ““Delete call history”
SCREEN” from “STEP 4”. (→P.363)
“Delete call history” SCREEN
For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic contact/history transfer” is
set to off. (→P.350)
INFORMATION
●Multiple data can be selected and
deleted at the same time.
IS_Navi_EE_53C71E.book 363 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

364
IS300h/250_Navi_EE
3. WHAT TO DO IF...
1. TROUBLESHOOTING
XWhen using the hands-free system with a Bluetooth® device
If there is a problem with the hands-free system or a Bluetooth® device, first check the
table below.
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
The hands-free sys-
tem or Bluetooth®
device does not
work.
The connected de-
vice may not be a
compatible
Bluetooth
® cellular
phone.
For a list of specific
devices which opera-
tion has been con-
firmed on this system,
check with your
Lexus dealer.
∗
The Bluetooth® ver-
sion of the connected
cellular phone may
be older than the
specified version.Use a cellular phone
with Bluetooth® ver-
sion 2.0 or higher
(recommended: Ver.
3.0 +EDR or higher).∗54
IS_Navi_EE_53C71E.book 364 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

365
3. WHAT TO DO IF...
IS300h/250_Navi_EE
TELEPHONE
7
XWhen registering/connecting a cellular phone
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
A cellular phone can-
not be registered.
An incorrect pass-
code was entered on
the cellular phone.Enter the correct
passcode on the cel-
lular phone.∗
The registration op-
eration has not been
completed on the
cellular phone side.Complete the regis-
tration operation on
the cellular phone
(approve registration
on the telephone).
∗
Old registration in-
formation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
∗59
A Bluetooth® con-
nection cannot be
made.
Another Bluetooth®
device is already
connected.
Manually connect
the cellular phone
you wish to use to this
system.
60
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular phone.∗
Automatic
Bluetooth® connec-
tion on this system is
set to off.
Set automatic
Bluetooth® connec-
tion on this system to
on when the engine
<power> switch is in
ACCESSORY or
IGNITION ON
<ON> mode.
65
IS_Navi_EE_53C71E.book 365 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

366
3. WHAT TO DO IF...
IS300h/250_Navi_EE
XWhen making/receiving a call
“Check your tele-
phone.” message is
displayed.
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular phone.∗
Old registration in-
formation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
∗59
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
A call cannot be
made/received.Your vehicle is in a
“No Service” area.Move to where “No
Service” no longer
appears on the dis-
play.

SymptomLikely causeSolution
Page
Cellular
phoneThis
system
IS_Navi_EE_53C71E.book 366 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

367
3. WHAT TO DO IF...
IS300h/250_Navi_EE
TELEPHONE
7
XWhen using the phonebook
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Phonebook data
cannot be trans-
ferred manually/au-
tomatically.
The profile version of
the connected cellu-
lar phone may not be
compatible with
transferring phone-
book data.For a list of specific
devices which opera-
tion has been con-
firmed on this system,
check with your
Lexus dealer.
∗
Automatic contact
transfer function on
this system is set to
off.Set automatic con-
tact transfer function
on this system to on.350
Passcode has not
been entered on the
cellular phone.Enter the passcode
on the cellular phone
if requested (default
passcode: 1234).
∗
Transfer operation
on the cellular phone
has not completed.Complete transfer
operation on the cel-
lular phone (approve
transfer operation on
the telephone).
∗
Phonebook data
cannot be edited.
Automatic contact
transfer function on
this system is set to
on.Set automatic con-
tact transfer function
on this system to off.350
IS_Navi_EE_53C71E.book 367 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

368
3. WHAT TO DO IF...
IS300h/250_Navi_EE
XWhen using the Bluetooth® message function
XIn other situations
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Messages cannot be
viewed.
Message transfer is
not enabled on the
cellular phone.Enable message
transfer on the cellu-
lar phone (approve
message transfer on
the telephone).
∗
Automatic transfer
function on this sys-
tem is set to off.Set automatic trans-
fer function on this
system to on.349
New message notifi-
cations are not dis-
played.
Notification of SMS/
MMS/E-mail recep-
tion on this system is
set to off.Set notification of
SMS/MMS/E-mail
reception on this sys-
tem to on.
∗349
Automatic message
transfer function is
not enabled on the
cellular phone.Enable automatic
transfer function on
the cellular phone.∗
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
The Bluetooth® con-
nection status is dis-
played at the top of
the screen each time
the engine <power>
switch is in ACCES-
SORY or IGNI-
TION ON <ON>
mode.
Connection confir-
mation display on this
system is set to on.To turn off the dis-
play, set connection
confirmation display
on this system to off.
64
IS_Navi_EE_53C71E.book 368 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

369
3. WHAT TO DO IF...
IS300h/250_Navi_EE
TELEPHONE
7
∗: For details, refer to the owner’s manual that came with the cellular phone.
Even though all con-
ceivable measures
have been taken, the
symptom status does
not change.
The cellular phone is
not close enough to
this system.Bring the cellular
phone closer to this
system.
Radio interference
has occurred.Turn off Wi-Fi® de-
vices or other devic-
es that may emit
radio waves.

The cellular phone is
the most likely cause
of the symptom.
Turn the cellular
phone off, remove
and reinstall the bat-
tery pack, and then
restart the cellular
phone.
∗
Enable the cellular
phone’s Bluetooth®
connection.
∗
Disable the Wi-Fi®
connection of the
cellular phone.∗
Stop the cellular
phone’s security soft-
ware and close all ap-
plications.
∗
Before using an ap-
plication installed on
the cellular phone,
carefully check its
source and how its
operation might af-
fect this system.
∗
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
IS_Navi_EE_53C71E.book 369 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

370
3. WHAT TO DO IF...
IS300h/250_Navi_EE
IS_Navi_EE_53C71E.book 370 ページ ２０１４年５月２９日　木曜日　午前１１時２２分