lock Lexus IS250 2014 Navigation Manual

79
3. OTHER SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
2
1Display the “General settings” screen.
(→P.75)
2Select “Customize image”.
3Select the items to be set.
■TRANSFERRING IMAGES
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a USB
memory.
zTurn on the power of the USB memory if it
is not turned on.
3Close the console box.
4Select “Copy from USB”.
No.FunctionPage
Select to copy images from
a USB memory.79
Select to delete images.81
Select to set an image as the
startup or screen off image.81
IS_Navi_EE_53C71E.book 79 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

167
4. MY MEMORY
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a USB
memory.
zTurn on the power of the USB memory if it
is not turned on.
3Close the console box.
4Display the “My memory” screen.
(→P.150)
5Select “Backup to USB”.
BACKUP TO A USB MEMORY
Memory points registered in the naviga-
tion system can be copied to a USB
memory.
A password must first be set in order to
back up data. (→P.168)
zExporting memory point data is for your
back-up use only and distribution or
usage in other system is strictly prohib-
ited.
IS_Navi_EE_53C71E.book 167 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

197
1. BASIC OPERATION
AUDIO/VISUAL SYSTEM
IS300h/250_Navi_EE
4
1Press the “” button and remove the
disc.
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a device.
zTurn on the power of the device if it is not
turned on.
3Close the console box.
EJECTING A DISC
NOTICE
●Never try to disassemble or oil any part of
the DVD player. Do not insert anything
other than a disc into the slot.
INFORMATION
●The player is intended for use with 4.7 in.
(12 cm) discs only.
●When inserting a disc, gently insert the
disc with the label facing up.
USB/AUX PORT
There are 2 USB ports and an AUX port
in the console box.
IS_Navi_EE_53C71E.book 197 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

255
5. SETUP
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
4
■AUDIO LANGUAGE
1Select “Audio language”.
2Select the desired language to be heard
on the “Audio language” screen.
zIf the desired language to be heard cannot
be found on this screen, select “Other ” and
enter a language code. (→P. 2 5 6 )
■SUBTITLE LANGUAGE
1Select “Subtitle language”.
2Select the desired language to be read
on the “Subtitle language” screen.
zIf the desired language to be read cannot
be found on this screen, select “Other ” and
enter a language code. (→P. 2 5 6 )
■MENU LANGUAGE
1Select “Menu language”.
2Select the desired language to be read
on the “Menu language” screen.
zIf the desired language to be read cannot
be found on this screen, select “Other ” and
enter a language code. (→P. 2 5 6 )
■ANGLE MARK
1Select “A n g l e m a r k ”.
2Select “On” or “Off”.
■PARENTAL LOCK
1Select “Parental lock”.
2Enter the 4-digit personal code on the
“Key code” screen.
3Select a parental level (1-8) on the “Se-
lect restriction level” screen.
■AUTO START
1Select “Auto-start playback”.
2Select “On” or “Off”.
■SOUND DYNAMIC RANGE
1Select “Sound dynamic range”.
2Select “MAX”, “STD” or “MIN”.
The audio language can be changed.
The subtitle language can be changed.
The language on the DVD video menu
can be changed.The multi-angle mark can be turned on
or off on the screen while discs that are
multi-angle compatible are being
played.
The level of viewer restrictions can be
changed.
Discs that are inserted while the vehicle
is in motion will automatically start play-
ing. Certain discs may not play.
The difference between the lowest vol-
ume and the highest volume can be ad-
justed.
IS_Navi_EE_53C71E.book 255 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

259
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
4
Fading and drifting stations: Generally, the
effective range of FM is about 25 miles (40
km). Once outside this range, you may no-
tice fading and drifting, which increase with
the distance from the radio transmitter.
They are often accompanied by distortion.
Multi-path: FM signals are reflective, mak-
ing it possible for 2 signals to reach the vehi-
cle’s antenna at the same time. If this
happens, the signals will cancel each other
out, causing a momentary flutter or loss of
reception.
Static and fluttering: These occur when sig-
nals are blocked by buildings, trees or other
large objects. Increasing the bass level may
reduce static and fluttering.
Station swapping: If the FM signal being lis-
tened to is interrupted or weakened, and
there is another strong station nearby on
the FM band, the radio may tune in the sec-
ond station until the original signal can be
picked up again.Fading: AM broadcasts are reflected by the
upper atmosphere — especially at night.
These reflected signals can interfere with
those received directly from the radio sta-
tion, causing the radio station to sound al-
ternately strong and weak.
Station interference: When a reflected sig-
nal and a signal received directly from a ra-
dio station are very nearly the same
frequency, they can interfere with each oth-
er, making it difficult to hear the broadcast.
Static: AM is easily affected by external
sources of electrical noise, such as high ten-
sion power lines, lightening or electrical
motors. This results in static.
FMAM
IS_Navi_EE_53C71E.book 259 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

383
1. CONNECTED SERVICES
CONNECTED SERVICES
IS300h/250_Navi_EE
8
3Select “External points”.
4Check that a confirmation screen is dis-
played when the operation is complete.
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a USB
memory.
zTurn on the power of the USB memory if it
is not turned on.
zTo edit memory points and routes:
→P.1 5 6 , 1 6 0
INFORMATION
●
Setting “Automatic memory point down-
load” to “Yes” will automatically download
external points. (→P. 3 8 9 )
• If a screen related to a memory point is
changed to before automatic memory
point download begins, automatic
memory point download will be can-
celled.
●If memory points which have the same
name are already stored in the system,
the system may not update those mem-
ory points.
PROCEDURE FOR
DOWNLOADING MEMORY
POINTS AND ROUTES FROM
A USB MEMORY
IS_Navi_EE_53C71E.book 383 ページ ２０１４年５月２９日　木曜日　午前１１時２２分