Lexus IS300h 2013 Navigation manual
Page 311 of 415
311
1. LEXUS PARKING ASSIST MONITOR
6
PERIPHERAL MONITORING SYS-
IS300h/250_Navi_EE
“System initialising.” is
displayedThe steering wheel has
been moved while the
12-volt battery was being
reinstalled.
The steering sensor has
been reinstalled.
There is a malfunction in
the signals being output
by the steering sensor.Stop the vehicle, and turn
the steering wheel as far as
it will go to the left and
right.
If this does not resolve the
symptom, have the vehicle
inspected by any autho-
rized Lexus dealer or re-
pairer, or another duly
qualified and equipped pro-
fessional.
On the system initializa-
tion screen, select “?” to
display the operating pro-
cedure.
SymptomLikely causeSolution
Page 312 of 415
312
1. LEXUS PARKING ASSIST MONITOR
IS300h/250_Navi_EE
Page 313 of 415
311
IS300h/250_Navi_EE
6
PERIPHERAL MONITORING SYS-
2. LEXUS PARKING ASSIST-SENSOR
1. LEXUS PARKING ASSIST-SENSOR*
Front corner sensors
Front centre sensors
Rear corner sensors
Rear centre sensors
1Turns the Lexus parking assist-sen-
sor on/off.
When on, the indicator light comes on
to inform the driver that the system is
operational.
The distance to obstacles measured
by the sensors is communicated via
the display and a buzzer when paral-
lel parking or maneuvering into a ga-
rage. Always check the surrounding
area when using this system.
TYPES OF SENSORS
*: If equipped
LEXUS PARKING ASSIST-
SENSOR SWITCH
Page 314 of 415
312
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
MULTI-INFORMATION DIS-
PLAY
Front corner sensors operation
Front centre sensors operation
Rear corner sensors operation
Rear centre sensors operation
NAVIGATION DISPLAY
When the vehicle is moving forward
: Select to mute the buzzer
sounds.
The graphic is automatically displayed
when an obstacle is detected. The
screen can be set so that the graphic is
not displayed. (P.318)
When the vehicle is moving back-
ward
A simplified image is displayed on the
right upper corner of the screen when
an obstacle is detected.
DISPLAY
When the sensors detect an obstacle,
the graphic is shown on the multi-in-
formation display and navigation
display according to position and
distance to the obstacle.
Page 315 of 415
313
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
6
PERIPHERAL MONITORING SYS-
CORNER SENSORS
CENTRE SENSORS
DETECTION LEVEL AND APPROXIMATE DISTANCE TO AN OB-
STACLE
THE DISTANCE DISPLAY AND BUZZER
When a sensor detects an obstacle, the direction of and the approximate dis-
tance to the obstacle are displayed and the buzzer sounds.
Level1234
Display example
BuzzerMediumFastContinuous
Level1234
Display example
BuzzerSlowMediumFastContinuous
Level1234
Front corner
sensors1.6 to 1.3 ft.
(50 to 40 cm)1.3 to 1.0 ft.
(40 to 30 cm)1.0 ft. (30 cm)
or less
Front centre
sensors3.3 to 1.6 ft.
(100 to 50 cm)1.6 to 1.3 ft.
(50 to 40 cm)1.3 to 1.0 ft.
(40 to 30 cm)1.0 ft. (30 cm)
or less
Rear corner
sensors2.0 to 1.5 ft.
(60 to 45 cm)1.5 to 1.0 ft.
(45 to 30 cm)1.0 ft. (30 cm)
or less
Rear centre
sensors4.9 to 2.0 ft.
(150 to 60 cm)2.0 to 1.5 ft.
(60 to 45 cm)1.5 to 1.1 ft.
(45 to 35 cm)1.1 ft. (35 cm)
or less
INFORMATION
Settings (e.g. buzzer volume) can be changed. (P.318)
Page 316 of 415
314
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
Approximately 1.6 ft. (50 cm)
Approximately 2.0 ft. (60 cm)
Approximately 3.3 ft. (100 cm)
Approximately 4.9 ft. (150 cm)
The diagram shows the detection range
of the sensors. Note that the sensors
cannot detect obstacles that are
extremely close to the vehicle.
The range of the sensors may change
depending on the shape of the object
etc.There is dirt, snow or ice on a sensor.
A sensor is frozen.
A sensor is covered in any way.
The vehicle is leaning considerably to
one side.
On an extremely bumpy road, on an
incline, on gravel, or on grass
The vicinity of the vehicle is noisy due
to vehicle horns, motorcycle engines,
air brakes of large vehicles, or other
loud noises producing ultrasonic
waves.
There is another vehicle equipped with
parking assist-sensors in the vicinity.
A sensor is coated with a sheet of spray
or heavy rain.
The vehicle is equipped with a fender
pole or radio antenna.
Towing eyelets are installed.
A bumper or sensor receives a strong
impact.
The vehicle is approaching a tall or
right-angled curb.
In harsh sunlight or intense cold
weather.
A non-genuine Lexus suspension (low-
ered suspension etc.) is installed.
DETECTION RANGE OF THE
SENSORSSENSOR DETECTION
INFORMATION
Certain vehicle conditions and the
surrounding environment may affect
the ability of a sensor to correctly de-
tect an obstacle. Particular instances
where this may occur are listed be-
low.
In addition to the examples above,
there are instances in which, because
of their shapes, signs and other
objects may be judged by a sensor to
be closer than they are.
Page 317 of 415
315
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
6
PERIPHERAL MONITORING SYS-
The shape of the obstacle may prevent
a sensor from detecting it. Pay particu-
lar attention to the following obstacles:
• Wires, fences, ropes, etc.
• Cotton, snow and other materials that
absorb sound waves
• Sharply-angled objects
• Low obstacles
• Tall obstacles with upper sections pro-
jecting outwards in the direction of
your vehicle
CAUTION
Caution when using the Lexus park-
ing assist-sensor
Observe the following precautions.
Failing to do so may result in the
vehicle being unable to be driven
safely and possibly cause an accident.
• Do not use the sensor at speeds in
excess of 6 mph (10 km/h).
• Do not attach any accessories within
the sensor range.
Even though sensors which are func-
tioning properly continue to detect
obstacles, never use the Lexus park-
ing assist if one more sensor(s) may
be malfunctioning.
NOTICE
Notes when washing the vehicle
Do not apply intensive bursts of water
or steam to the sensor area.
Doing so may result in the sensor
malfunctioning.
As the parking assist-sensor might be
malfunctioning in the following
cases, have it checked by any autho-
rized Lexus dealer or repairer, or
another duly qualified and equipped
professional.
• The graphic which indicates that an
obstacle has been detected does not
come on and a beep does not sound
even when the Lexus parking assist-
sensor mode is turned on.
• The graphic which indicates that an
obstacle has been detected comes on
despite no obstacle around the vehi-
cle.
• If your vehicle has been involved in
an accident.
• If the graphic which indicates that
an obstacles has been detected
remains on without a beeping sound.
Page 318 of 415
316
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
LEXUS PARKING ASSIST-
SENSOR FAILURE
WARNING
If an error is detected when the park-
ing assist-sensor is turned on, the ve-
hicle symbol comes on or flashes
with beeping sounds.
INFORMATION
The parking assist-sensor failure
warning display is not given in either
of the following operations:
• Changing to another screen
• Turning off the main switch for the
Lexus parking assist-sensor
WHEN SNOWFLAKES OR
MUD GETS ON THE
SENSORS
INFORMATION
If this screen appears, remove the for-
eign matter from the sensor.
If the failure warning does not go off
even after the foreign matter is
removed, the parking assist-sensor
may be malfunctioning. Have it
checked by any authorized Lexus
dealer or repairer, or another duly
qualified and equipped professional.
Page 319 of 415
317
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
6
PERIPHERAL MONITORING SYS-
If this screen appears, have the parking
assist-sensor checked by any autho-
rized Lexus dealer or repairer, or
another duly qualified and equipped
professional.
WHEN THE SENSOR IS
MALFUNCTIONING
Page 320 of 415
318
2. LEXUS PARKING ASSIST-SENSOR
IS300h/250_Navi_EE
2. LEXUS PARKING ASSIST SETTING
1Press the “MENU” button on the
Remote Touch.
2Select “Setup”.
3Select “Vehicle”.
4Select “LEXUS park assist”.
5Select the desired button.
The volume of the beeps, turning on
or off of the display, etc. can be set.