display Lexus IS300h 2014 Navigation manual

366
3. WHAT TO DO IF...
IS300h/250_Navi_EE
XWhen making/receiving a call
“Check your tele-
phone.” message is
displayed.
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular phone.∗
Old registration in-
formation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
∗59
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
A call cannot be
made/received.Your vehicle is in a
“No Service” area.Move to where “No
Service” no longer
appears on the dis-
play.

SymptomLikely causeSolution
Page
Cellular
phoneThis
system
IS_Navi_EE_53C71E.book 366 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

368
3. WHAT TO DO IF...
IS300h/250_Navi_EE
XWhen using the Bluetooth® message function
XIn other situations
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Messages cannot be
viewed.
Message transfer is
not enabled on the
cellular phone.Enable message
transfer on the cellu-
lar phone (approve
message transfer on
the telephone).
∗
Automatic transfer
function on this sys-
tem is set to off.Set automatic trans-
fer function on this
system to on.349
New message notifi-
cations are not dis-
played.
Notification of SMS/
MMS/E-mail recep-
tion on this system is
set to off.Set notification of
SMS/MMS/E-mail
reception on this sys-
tem to on.
∗349
Automatic message
transfer function is
not enabled on the
cellular phone.Enable automatic
transfer function on
the cellular phone.∗
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
The Bluetooth® con-
nection status is dis-
played at the top of
the screen each time
the engine <power>
switch is in ACCES-
SORY or IGNI-
TION ON <ON>
mode.
Connection confir-
mation display on this
system is set to on.To turn off the dis-
play, set connection
confirmation display
on this system to off.
64
IS_Navi_EE_53C71E.book 368 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

375
1. CONNECTED SERVICES
IS300h/250_Navi_EE
CONNECTED SERVICES
8
2. SETTINGS REQUIRED FOR USING THE SERVICE
1Press the “MENU” button on the
Remote Touch.
2Select “Setup”.
3Select “Navigation”.
4Select “Connected service”.
5Check that navigation identification is
displayed.
OBTAINING LEXUS PORTAL
SITE ACCOUNT
Before using connected services, it is
necessary to first access Lexus portal
site (www.my.lexus.eu
) via a personal
computer etc. and create an account.
CHECKING NAVIGATION
IDENTIFICATION
IS_Navi_EE_53C71E.book 375 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

378
1. CONNECTED SERVICES
IS300h/250_Navi_EE
6Enter a search item and select “Search”.7Select the desired point from the dis-
played list.
No.FunctionPage
Select to set a provider.379
Select to set a destination
or enter a keyword such as
the establishment or shop
name.
379
Select to narrow down the
search area.
The search area can be
narrowed down by enter-
ing an address, selecting a
previously searched desti-
nation, the last displayed
map or one of the current
destinations.
380
No.Function
Displays search results
•Up to 20 search results are down-
loaded at a time.
•Unsupported characters will not
be displayed on the list.
•Highlighted advertisements may
be displayed at the top of the
search result list.
Select to display the previous or next
screen.
•If there are no more results in the
current list, a confirmation screen
will be displayed.
“Download more”: Select to down-
load the next 20 search results.
“New search”: Select to perform a
new search.
Select to display a full screen map.
IS_Navi_EE_53C71E.book 378 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

379
1. CONNECTED SERVICES
CONNECTED SERVICES
IS300h/250_Navi_EE
8
8Check that POI information is displayed
and select “Enter”.
zThe route will be calculated.1Select “Provider”.
2Select the desired search engine.
zThe selected search engine indicator will
illuminate.
1Select “What”.
2Enter the word and select “OK”.
“History”: Select to set a previously
searched word. (→P.380)
No.FunctionPage
Select to call the registered
telephone number.
Select to display detailed
information. 381
Select to set as a destina-
tion. If a destination has al-
ready been set, “Add to ”
and “Replace ” will be
displayed.
“Add to ”: Select to add a
destination.
“Replace ”: Select to de-
lete the existing destina-
tion(s) and set a new one.
131
Select to display the Street
View.385
INFORMATION
●
After establishments acquired using
“Online search” have been set as a desti-
nation once, they can be saved as a mem-
ory point. (→P.1 5 6 )
SELECTING A SEARCH
ENGINE
The desired search engine can be set.
Before using a new search engine, the
terms of use must be read and agreed to
on Lexus portal site. Depending on the
conditions, certain search engines can-
not be selected.
ENTERING A SEARCH WORD
IS_Navi_EE_53C71E.book 379 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

380
1. CONNECTED SERVICES
IS300h/250_Navi_EE
■SELECTING A PREVIOUS WORD
TO SEARCH
1Select “History”.
2Select the desired word.
“Delete”: Select to delete previous search
words.
1Select “Where”.
2Select the desired item to search for a
point.
SELECTING A SEARCH AREA
No.Function
Select to set a location by address or
location.
Select to set a location by a previous-
ly selected destination. (→P.1 2 5 )
Select to set a location by using the
current position.
Select to set a location by using the
last displayed map.
Select to set a location by using a
current destination.
Select to change pages.
IS_Navi_EE_53C71E.book 380 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

381
1. CONNECTED SERVICES
CONNECTED SERVICES
IS300h/250_Navi_EE
8
1Select “Detail” on the POI information
screen. (→P.379)
2Check that the details of the selected
POI are displayed.
1Select “Feedback”.
2Check that the following screen is dis-
played.
3Select “Submit”.
VIEWING POI DETAILS
No.FunctionPage
Select to view the POI’s de-
tails. If supported by your
search provider, the feed-
back function will be dis-
played.
381
Select a desired picture to
display it in full screen, if
pictures are available.
EVALUATING THE
INFORMATION
Your rating of the selected POI can be
submitted. If the information is incorrect,
you can notify the search provider by se-
lecting the appropriate button.
No.Function
Select to enter your rating.
Select to notify the search provider
of incorrect information.
IS_Navi_EE_53C71E.book 381 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

384
1. CONNECTED SERVICES
IS300h/250_Navi_EE
3Close the console box.
4Display the “My memory” screen.
(→P.382)
5Select “Copy from USB”.
zIf a password has already been set, enter
the password. For instructions on setting a
password: →P.1 6 8
zIf there are multiple memory points stored
on the USB memory, select the memory
points and routes to be copied and select
“Start”.
6Check that a progress bar is being dis-
played while the data copy is in
progress.
zTo cancel this function, select “Cancel”.
7Check that a confirmation screen is dis-
played when the operation is complete.
INFORMATION
●
Memory points that are located outside
of the map’s data range cannot be regis-
tered.
●A maximum of 500 memory points can
be registered.
●When there are 21 or more memory
points and routes stored on a USB mem-
ory, only 20 memory points and routes
will be displayed at a time.
●Memory points acquired from Lexus por-
tal site can only be registered with the
registered system at the time of acquire-
ment.
●In some cases, memory points and routes
may not be able to be imported. If this
occurs, “Unable to read memory point
data. (Device ID error)” will be displayed.
●If memory points and routes which have
the same name are already stored in the
system, the system may not update those
memory points and routes.
IS_Navi_EE_53C71E.book 384 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

385
1. CONNECTED SERVICES
IS300h/250_Navi_EE
CONNECTED SERVICES
8
5. Street View
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Street View”.
4Select the desired item to search for a
point.The Street View of the desired location
can be viewed. In order to perform
Street View, the system must already be
connected to the internet. (→P.376)
No.Function
Select to set a Street View location
by address or location.
Select to set a Street View location
by a previously selected destination.
(→P.1 2 5 )
Select to set a Street View location
by using the current position.
Select to set a Street View location
by using the last displayed map.
Select to set a Street View location
by using a current destination.
Select to change pages.
IS_Navi_EE_53C71E.book 385 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

386
1. CONNECTED SERVICES
IS300h/250_Navi_EE
5Check that the picture is displayed.
“”, “ ”: Select to change pictures. Up to 6
pictures per location can be displayed.
INFORMATION
●
The Street View function can also be
selected from the following screens:
• Starting route guidance screen
(→P.1 3 3 )
• Online search result screen (→P. 3 7 9 )
●This function is not available while driving.
IS_Navi_EE_53C71E.book 386 ページ ２０１４年５月２９日　木曜日　午前１１時２２分