navigation Lexus IS300h 2014 Navigation manual

115
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select “Search area”.
2Select the location or area to be
searched.
SEARCHING FOR PARKING
LOT
No.Function
A search around the current position
can be performed.
A search around the currently set
destination can be performed.
The size of the search area around
the set location can be selected.
Select to change pages.
IS_Navi_EE_53C71E.book 115 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

116
IS300h/250_Navi_EE
2. DESTINATION SEARCH
1. DESTINATION SEARCH SCREEN
The “Destination” screen enables you to search for a destination. Press the “MENU”
button on the Remote Touch. Select “Nav” and then “Menu” to display the navigation
menu screen. Then select “Destination” to display the “Destination” screen.
No.FunctionPage
Select to search for a destination by address.120
Select to search for a destination by point of interest.123
Select to search for a destination by online search.
The navigation system can use an internet search engine to set a desti-
nation using the most up to date information. After setting the search
engine to be used for “Online search”, the screen button name will
change to the search engine’s logo.
377
Select to change the search area.119
IS_Navi_EE_53C71E.book 116 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

117
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
Select to search for a destination by the last displayed map.124
Select to search for a destination by memory points.124
Select to search for a destination from previously set destinations.125
Select to search for a destination by intersection.126
Select to search for a destination by motorway entrance/exit.127
Select to search for a destination by UK/NL postal code.130
Select to search for a destination by coordinates.128
Select to search for a destination by telephone number.128
Select to search for a destination by point of interest near cursor.129
Select to set a destination by home.119
Select to set a destination by quick access.120
No.FunctionPage
IS_Navi_EE_53C71E.book 117 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

119
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Destination” screen.
(→P.118)
2Select the search area button.
3Enter the search area name and select
“OK”.
4Select the desired search area.
1Display the “Destination” screen.
(→P.118)
2Select “Home”.
SELECTING THE SEARCH
AREA
INFORMATION
●
Included countries may be different by
map version or sales countries.
●For map database information and
updates: →P.1 8 7
SETTING HOME AS
DESTINATION
To use this function, it is necessary to
register a home address. (→P.152)
IS_Navi_EE_53C71E.book 119 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

121
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select “Town”.
2Enter the town name and select “OK”.
“Option”: Select to select a town in a differ-
ent way. (→P.121)
3Select the desired town name.
: Select to display a map of the cen-
tral area of the desired town.
■SELECTING A TOWN IN A DIFFER-
ENT WAY
1Select “Option”.
2Select the desired item.
3Select the desired town name.
ENTERING A TOWN NAME
No.FunctionPage
Select to enter the postal
code.122
Select from the last 5
towns.
Select from the nearest 5
towns.
IS_Navi_EE_53C71E.book 121 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

123
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Destination” screen.
(→P.118)
2Select “POI”.
3Enter the name of the POI and select
“OK”.
4Select the desired POI.
“Category”: Select to narrow down the cat-
egory.
“Town”: Select to narrow down a town.
zWhen entering the name of a specific POI,
and there are 2 or more sites with the same
name, the list screen is displayed.
■NARROWING DOWN CATEGO-
RIES
1Select “Categor y”.
2Select the desired category.
“List all categories”: Select to display all
POI categories.
■NARROWING DOWN A TOWN
1Select “Town”.
2Enter the town name and select “OK”.
“Option”: Select to select a town in a differ-
ent way. (→P.121)
3Select the desired town name.
SEARCHING BY POI
IS_Navi_EE_53C71E.book 123 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

125
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■SELECTING A STORED ROUTE
1Select “Stored routes”.
2Select the desired stored route.
3Select “OK”.
zA map of the destination will be displayed
when a destination is selected from the list.
1Display the “Destination” screen.
(→P.118)
2Select “Previous”.
3Select the desired destination.
“Previous start point”: Select to display the
start point map of the previous guided
route.
“Delete”: Select to delete the previous des-
tination. (→P.126)
This feature is available when a route es-
tablished and downloaded from Lexus
portal site is stored in the navigation sys-
tem. (→P.382)
SEARCHING FROM
PREVIOUS DESTINATIONS
INFORMATION
●
The previous starting point and up to 100
previously set destinations are displayed
on the screen.
IS_Navi_EE_53C71E.book 125 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

127
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Destination” screen.
(→P.118)
2Select “Motorway ent./exit”.
3Enter a motorway name and select
“OK”.
4Select the desired motorway.
5Select “Entrance” or “Exit”.
6Select the desired entrance or exit
name.
“Enter name”: Select to enter an entrance
or exit name to narrow down the listed
items.
INFORMATION
●
If the same 2 streets cross at more than 1
intersection, the screen changes and dis-
plays the menu to select the town name
where the streets intersect.
SEARCHING BY MOTORWAY
ENTRANCE/EXIT
IS_Navi_EE_53C71E.book 127 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

129
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Destination” screen.
(→P.118)
2Select “POI near cursor”.
3Set the search point by one of the fol-
lowing methods.
4Scroll the map to the desired point
(→P.103) and select “OK”.
5Select the desired POI categories and
select “List”.
“List all categories”: Select to display all
POI categories. To add more POI catego-
ries, select “More”.
6Select the desired POI.
zThe direction arrows of POIs are displayed
only when the current position is set as the
search point.
“On this route”: Select to search for POIs
along the route. When set to on, the indica-
tor will illuminate.
SEARCHING BY POI NEAR
CURSOR
The destination can be set by selecting
the search point and the POI category. It
is possible to display the names of POIs
located within approximately 20 miles
(30 km) from the selected search point.
No.Function
Select to enter the town name.
(→P.130)
Select to set a point by using the cur-
rent position.
Select to set a point by using the last
displayed map.
Select to set a point by using a cur-
rent destination.
Select to change pages.
IS_Navi_EE_53C71E.book 129 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

131
2. DESTINATION SEARCH
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
3. STARTING ROUTE GUIDANCE
1Select “Enter” on the destination map
screen.
zFor details about this screen: →P.1 3 2
2Select “Start” on the starting route
guidance screen.
zFor details about this screen: →P.1 3 3
After entering the destination, the
screen changes and displays the map lo-
cation of the selected destination.
STARTING ROUTE
GUIDANCE
CAUTION
●Be sure to obey traffic regulations and
keep road conditions in mind while driv-
ing. If a traffic sign on the road has been
changed, the route guidance may not
indicate such changed information.
INFORMATION
●
The route for returning may not be the
same as that for going.
●The route guidance to the destination
may not be the shortest route or a route
without traffic congestion.
●Route guidance may not be available if
there is no road data for the specified
location.
●When setting the destination on a map
with a scale more than 0.5 mile (500 m),
the map scale changes to 0.5 mile (500
m) automatically. If this occurs, set the
destination again.
●If a destination that is not located on a
road is set, the vehicle will be guided to
the point on a road nearest to the destina-
tion. The road nearest to the selected
point is set as the destination.
IS_Navi_EE_53C71E.book 131 ページ ２０１４年５月２９日　木曜日　午前１１時２２分