display lexus LC500 2018 Navigation Manual

188
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
7-1.Phone ope ration (Hands -free system for cellular pho nes)
The phone top screen can be reached
by the following method:
1 Press the “MENU” button on the
Remote Touch, then select “Phone”.
Select to display the “History”
screen. ( P.192)
Select to display the “Favourites”
screen. ( P.193)
Select to display the “Contacts”
screen. ( P.193)
Select to display the “Keypad”
screen. ( P.194)
Select to select device if there are
more than 2 phones registered.
Select to display the “Message”
screen. ( P.199)
The following functions can be used on
phone operation:
 Registering/connecting Bluetooth®
device ( P.39)
 Calling on the Bluetooth® phone
( P.192)
 Receiving on the Bluetooth® phone
( P.195)
 Talking on the Bluetooth® phone
( P.196)
The following function can be used on
message function:
 Using the Bluetooth® phone mes-
sage function ( P.199)
The following settings can be made in
navigation system:
 Phone settings (P.204)
 Bluetooth® settings (P.43)
Quick reference
Phone top screen operation
Phone operation
A
B
C
D
E
F
Message function
Setting up a phone

192
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
1Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the desired method to call
from.
■Calling methods from phone top
screen
 By favourite (P.193)
 By call history (P.192)
 By contacts (P.193)
 By keypad (P.194)
 By message (P.199)
■Also the following lists are avail-
able from each function’s screen
 By POI call (P.75)
 By speech command system
( P.168)
Up to 45 of the latest call history items
(missed, incoming and outgoing) can
be selected from the “History”.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “History” on the sub menu
and select the desired contact.
 If the contact which is not registered
on the contact list is selected, the
name is displayed as “Unknown”. In
this case, follow the guidance on the
screen to make a call properly.
4 Check that the call screen is dis-
played.
●The icons of call type are displayed.
: Missed call
: Incoming call
: Outgoing call
●When making a call to the same number continuously, only the most recent call is listed in call history.
●When a phone number registered in the contact list is received, the name is dis-
played.
●Number-withheld calls are also memo-
rized in the system.
●International phone calls may not be
Calling on the Bluetooth®
phone
After a Bluetooth® phone has been
registered, a call can be made using
the hands-free system. There are
several methods by which a call can
be made, as described below.
Calling methods on the
Bluetooth® phone
By call history

193
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
made depending on the type of cellular phone you have.
●The list should group together consecu-tive entries with the same phone number and same call type. For example, two calls
from John’s mobile would be displayed as follows: John (2)
●By pressing the switch on the steer-
ing wheel, a call to the latest history item can be made.
Calls can be made using registered
contacts which can be selected from a
contact list. ( P.210)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Favourites” on the sub
menu and select the desired con-
tact.
4 Select the desired number.
5 Check that the call screen is dis-
played.
Calls can be made by using contact
data which is transferred from a regis-
tered cellular phone. ( P.193)
Up to 5000 contacts (maximum of 4
phone numbers and 4 e-mail
addresses per contact) can be regis-
tered in the contact list.
■Calling from contacts list
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Contacts” on the sub
menu and select the desired con-
tact.
“E-mail Addresses”: Select to display all
registered e-mail addresses for the con- tact.
4 Select the desired number.
5 Check that the call screen is dis-
played.
■For PBAP compatible Bluetooth®
phones when “Automatic transfer”
is set to on ( P.206)
 Contacts are transferred automati-
cally.
■For PBAP compatible Bluetooth®
phones when “Automatic transfer”
is set to off ( P.206)
1 Select the desired item.
Select to always transfer all the
contacts from a connected cellular
phone automatically.
Select to transfer all the contacts
from a connected cellular phone
only once.
Select to cancel transferring.
By favour ites list
By contacts list
When the contact is empty
A
B
C

194
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
2Check that a confirmation screen is
displayed when the operation is
complete.
■For PBAP incompatible but OPP
compatible Bluetooth® phones
1 Select the desired item.
Select to transfer the contacts from
the connected cellular phone.
Follow the steps in “Transfer con-
tacts from device” from step 2.
( P.207)
Select to add a new contact manu-
ally.
Follow the steps in “Registering a
new contact to the contacts list”
from step 2. (P.209)
Select to cancel transferring.
●If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be
transferred using Bluetooth®. But the contacts can be transferred from USB device. ( P.208)
●Depending on the type of Bluetooth® phone:
• It may be necessary to perform additional steps on the phone when transferring contact data.
• The registered image in the contact list may not transfer depending on the type
of Bluetooth® phone connected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and enter the phone number.
4 Select or press the switch
on the steering wheel.
5 Check that the call screen is dis-
played.
●Depending on the type of Bluetooth® phone being connected, it may be neces-
sary to perform additional steps on the phone.
■112 emergency call support
This feature is used to make a 112
emergency call. This function is not
available when the hands-free system
is not connected.
The call has to be placed from a coun-
try where 112 is available.
●The SOS function uses a different system than the ERA-GLONASS system (if equipped).
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Keypad” on the sub
menu and select “SOS”.
4 Select “112”.
A
B
C
By keypad
SOS

195
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
5Check that the call screen is dis-
played.
 The current location of the vehicle is
displayed at bottom on the screen.
■Roadside assist
This feature is used to make a call to
Lexus roadside assist service.
The call has to be placed from a coun-
try where Lexus roadside assist service
is available.
To use this function, it is necessary to
register a country. ( P.212)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select the “Favourites” on the sub
menu.
4 Select “Lexus Euro assistance 24”.
5 Select .
6 Check that the call screen is dis-
played.
 The current location of the vehicle is
displayed at bottom on the screen.
1 Select “Answer” or press the
switch on the steering wheel to talk
on the phone.
Main display
Side display
To refuse to receive the call: Select “Decline”.
To adjust the volume of a received call: Turn the “PWR·VOL” knob, or use the volume
control switch on the steering wheel.
●During international phone calls, the
other party’s name or number may not be
Receiving on the Bluetooth®
phone
When a call is received, this screen
is displayed with a sound.
This screen can also be displayed
on the side display.
Incoming calls

196
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
displayed correctly depending on the type of cellular phone you have.
●The ringtone that has been set in the “Sounds” screen sounds when there is an incoming call. Depending on the type of
Bluetooth® phone, both the system and
Bluetooth® phone may sound simultane- ously when there is an incoming call. ( P.204)
●The incoming call display mode can be set. ( P.205)
Main display
Select to display the keypad to send
tones. ( P.197)
Select to send tones. This button
only appears when a number that
contains a (w) is dialed in hands-
free mode. ( P.197)
Select to adjust your voice volume
that the other party hears from their
speaker. ( P.198)
Select to mute your voice to the
other party.
Select to mute navigation’s route
guidance during talking on the
phone.
Select to change handset modes
Talking on the Bluetooth®
phone
While talking on the phone, this
screen is displayed. The operations
outlined below can be performed
on this screen.
This screen can also be displayed
on the side display.
Call screen operation
A
B
C
D
E
F

197
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
between hands-free and cellular
phone.
Select to talking/holding with the
other party*. ( P.198)
Select to hang up the phone.
*: This function may not be available
depending on the type of Bluetooth®
phone.
Side display
Select to mute your voice to the
other party.
Select to change handset modes
between hands-free and cellular
phone.
Select to hang up the phone.
Select to start talking/holding with
the other party*. ( P.198)
Select to switch to the main display.
*: This function may not be available
depending on the type of Bluetooth®
phone.
●When cellular phone call is changed to hands-free call, the hands-free screen will
be displayed and its functions can be operated on the screen.
●Changing between cellular phone call and hands-free call can be performed by
operating the cellular phone directly.
●Transferring methods and operations will
be different depending on the type of cel- lular phone you have.
●For the operation of the cellular phone, see the manual that comes with it.
●This screen can be di splayed on the main display or side display. ( P.205)
■By keypad
This operation cannot be performed
while driving.
1 Select “0-9” on the sub menu.
2 Enter the desired number.
■By selecting “Release tones”
“Release tones” appear when a contin-
uous tone signal(s) containing a (w) is
registered in the contact list.
1 Select “Release tones” on the sub
menu.
●A continuous tone signal is a character string that consists of numbers and the
characters p or w. (e.g. 056133w0123p#1 )
●When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have
elapsed. When the “w” pause tone is used, the tone data up until the next pause tone will be automatically sent
after a user operation is performed.
●Release tones can be used when auto-
mated operation of a phone based ser- vice such as an answering machine or bank phone service is desired. A phone
number with continuous tone signals can be registered in the contact list.
●Tone data after a “w” pause tone can be operated on speech command during a call.
G
H
A
B
C
D
E
Sending tones

198
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
1Select “Transmit volume” on the sub
menu.
2 Select the desired level for the
transmit volume.
3 Press the button on the
Remote Touch to display previous
screen.
●The sound quality of the voice heard from the other party’s speaker may be nega-
tively impacted.
●“Transmit volume” is dimmed when mute
is on.
When a call is interrupted by a third
party while talking, the incoming
screen is displayed.
The incoming screen can also be dis-
played on the side display.
1 Select “Answer” or press the
switch on the steering wheel to
start talking with the other party.
 To refuse to receive the call: Select
“Decline”.
 Each time “Swap calls” is selected,
the party who is on hold will be
switched.
●This function may not be available
depending on the type of cellular phone.
●This screen can be displayed on the main
display or side display.
 When there are no calls on hold
during a call: “Hold” is displayed.
When selected, the current call is
placed on hold.
 When there is no current call, but
there is a call on hold: “Activate” is
displayed. When selected, the sys-
tem switches to the call that was on
hold.
 When there is another call on hold
during a call: “Swap calls” is dis-
played. When selected, the current
call is placed on hold, and the sys-
tem switches to the call that was on
hold.
●This function may not be available depending on the type of cellular phone.
●This screen can be di splayed on the main display or side display.
Transmit volume setting
Incoming call waiting
Switching calls whil e a call is in
progress

199
7
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
Phone
1Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select the account name.
 Account names are the names of
the accounts that exist on the cur-
rently connected phone.
5 Check that the message inbox
screen is displayed.
“Phone”: Select to change to phone mode.
 The following functions can be used
on message function:
• Receiving a message ( P.199)
• Checking received messages
( P.200)
• Checking sent messages ( P.200)
• Replying to a message (Create new
message) ( P.201)
• Replying to a message (Quick reply)
( P.201)
• Calling the message sender ( P.202)
• “Messaging” screen ( P.211)
When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and is ready
to be operated on the screen.
Select to check the message.
Select to not open the message.
Select to call the message sender.
●To display the above screen, it needs to
Bluetooth® phone message
function
Received messages and sent mes-
sages can be forwarded from the
connected Bluetooth® phone,
enabling checking and replying
using the system.
Depending on the type of
Bluetooth® phone connected,
received messages may not be
transferred to the message inbox.
If the phone does not support the
message function, this function
cannot be used. Ev en when the sup-
ported phone is used, reply function
may not be used.
Displaying the message inbox
screen
Receiving a message
A
B
C

200
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
be set to “Full screen” on “Incoming SMS/MMS display” and “Incoming E-mail display”. ( P.205) Default setting is
“Drop-down”.
●Depending on the cellular phone used
for receiving messages, or its registration status with the system, some information may not be displayed.
●The pop up screen is separately available for incoming e-mail and SMS/MMS
messages under the following conditions:
E-mail:
• “E-mail notification pop-up” is set to on.
( P.205)
SMS/MMS:
• “SMS/MMS notification pop-up” is set to
on. ( P.205)
1Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select a desired account name that
is displayed on the left side of
screen.
5 Select the desired message from
the list.
6 Check that the message is dis-
played.
Select “Mark unread” or “Mark
read” to mark e-mail unread or
read on the message screen.
This function is available when
“Update message read status on
phone” is set to on. ( P.211)
When the text message type is
SMS, it is not displayed.
Select to reply to the message.
( P.201)
Select to display the previous or
next message.
Select to have messages read out.
To cancel this function, select .
When “Automatic message read-
out” is set to on, messages will be
automatically read out. ( P.211)
Select to make a call to the sender.
●Depending on the type of Bluetooth® phone being connected, it may be neces-sary to perform additional steps on the
phone.
●Messages are displayed in the appropri-
ate connected Bluetooth® phone’s regis- tered mail address folder. Select the desired folder name to be displayed.
●Turn the “PWR·VOL” knob, or use the volume control switch on the steering
wheel to adjust the message read out vol- ume.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
Checking received messages
A
Checking sent messages
B
C
D
E