display lexus LC500 2018 Navigation Manual

43
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
• This is a profile to allow remote control
the A/V equipment.
●If your cellular phone does not support
HFP, registering the Bluetooth® phone or using OPP, PBAP, MAP or PAN pro-files individually will not be possible.
●If the connected Bluetooth® device ver-sion is older than recommended or
incompatible, the Bluetooth® device function may not work properly.
●Certification
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
Other trademarks and trade names are
those of their respective owners.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select the desired item to be set.
Connecting a Bluetooth® device
( P.45)
Registering a Bluetooth® device
Setting Bluetooth® details
Displaying the Bluetooth® setup
screen
Bluetooth® setup screen
A
B

44
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.44)
Deleting a Bluetooth® device
( P.44)
Editing the Bluetooth® device
information and system settings
( P.49)
Up to 5 Bluetooth® devices can be
registered.
Bluetooth® compatible phones (HFP)
and audio players (AVP) can be regis-
tered simultaneously.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Add new device”.
When another Bluetooth® device is
connected
 To disconnect the Bluetooth®
device, select “Yes”.
When 5 Bluetooth® devices have
already been registered
 A registered device needs to be
replaced. Select “Yes”, and select
the device to be replaced.
5 Follow the steps in “Registering a
Bluetooth® phone for the first time”
from step 6. (P.39)
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Remove device”.
5 Select the desired device.
6 Select “Yes” when the confirmation
screen appears.
7 Check that a confirmation screen is
displayed when the operation is
complete.
●When deleting a Bluetooth® phone, the contact data will be deleted at the same
time.
Registering a Bluetooth® device
C
D
Deleting a Bluetooth® device

45
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
Up to 5 Bluetooth® devices (Phones
(HFP) and audio players (AVP)) can be
registered.
If more than 1 Bluetooth® device has
been registered, select which device to
connect to.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Registered device”.
5 Select the device to be connected.
: Phone
: Audio player
 The profile icon for a currently con-
nected device will be displayed in
color.
 Selecting a profile icon which is not
currently connected will switch the
connection to the function.
 If the desired Bluetooth® device is
not on the list, select “Add new
device” to register the device.
( P.44)
6 Select the desired connection.
7 Check that a confirmation screen is
displayed when the connection is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●It may take time if the device connection
is carried out during Bluetooth® audio
playback.
●Depending on the type of Bluetooth® device being connected, it may be neces-sary to perform additional steps on the
device.
●When disconnecting a Bluetooth®
device, it is recommended to disconnect using the system.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
Connecting a Bluetooth®
device
Connecting a Bluetooth® device
in a different way (from phone
setup screen)

47
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
■Connecting manually
When the auto connection has failed
or “Bluetooth* power” is turned off, it is
necessary to connect Bluetooth®
manually.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Follow the steps in “Connecting a
Bluetooth® device” from step 4.
( P.45)
■Reconnecting the Bluetooth®
phone
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth® network when the engine
switch <power switch> is in ACCES-
SORY or IGNITION ON mode <ON
mode>, the system automatically
reconnects the Bluetooth® phone.
The Bluetooth® device’s information
can be displayed on the screen. The
displayed information can be edited.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Registered device”.
5 Select the desired device to be
edited.
6 Select “Device info”.
Editing the Bluetooth® device
information

48
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
7Confirm and change the
Bluetooth® device information.
The name of the Bluetooth® device
is displayed. It can be changed to a
desired name. ( P.48)
Select to set the Bluetooth® audio
player connection method.
( P.48)
Device address is unique to the
device and cannot be changed.
Phone number is unique to the
Bluetooth® phone and cannot be
changed.
Compatibility profile is unique to
the Bluetooth® device and cannot
be changed.
Select to reset all setup items.
●If 2 Bluetooth® devices have been regis- tered with the same device name, the devices can be distinguished referring to
the device’s address.
●Depending on the type of phone, some
information may not be displayed.
1 Select “Device name”.
2 Enter the name and select “OK”.
●Even if the device name is changed, the
name registered in your Bluetooth® device does not change.
1 Select “Connect audio player
from”.
2 Select the desired connection
method.
“Vehicle”: Select to connect the audio sys- tem to the audio player.
“Device”: Select to connect the audio player to the audio system.
 Depending on the audio player, the
“Vehicle” or “Device” connection
method may be best. As such, refer
to the manual that comes with the
audio player.
A
B
C
D
E
F
Changing a device name
Setting audio player connection
method

50
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.50)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® audio players.
( P.50)
Select to reset all setup items.
●A newly registered Bluetooth® device will automatically be given the highest automatic connection priority.
■Changing phone automatic con-
nection priority
1 Select “Preferred phones”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
■Changing audio player automatic
connection priority
1 Select “Preferred audio players”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
1 Select “System information”.
2 Select the desired item to be set.
Displays system name. Can be
changed to a desired name.
( P.51)
PIN code used when the
Bluetooth® device was registered.
Can be changed to a desired code.
( P.51)
Device address is unique to the
C
D
Editing the system information
A
B
C

51
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
device and cannot be changed.
Select to set the phone connection
status display on/off.
Select to set the connection status
display of the audio player on/off.
Compatibility profile of the system
Select to reset all setup items.
■Editing the system name
1 Select “System name”.
2 Enter a name and select “OK”.
■Editing the PIN code
1 Select “System PIN code”.
2 Enter a PIN code and select “OK”.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select the items to be set.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
D
E
F
G
Connecting to internet via
Wi-Fi®
Using the Wi-Fi® function, this sys-
tem can connect to the internet,
which allows the use of the con-
nected services, traffic information,
etc.
Displaying the Wi-Fi® settings
screen

52
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Select to turn the Wi-Fi® function
on/off. ( P.52)
Select to access to network on/off.
Displays connected network name
Select to search for available net-
works that can be connected.
( P.52)
Select to connect quickly to a WPS
compatible Wi-Fi® device.
( P.53)
Select to set the detailed Wi-Fi®
settings. ( P.53)
Displays status of the Miracast™
connection. ( P.142)
“On”: Connecting
“Off”: Not connecting
When turned on, “Available networks”
and “Easy setup” can be selected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Wi-Fi* power”.
 Each time it is selected, the “Wi-Fi*
power” is turned on/off.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
Available networks can be searched
for and connected to.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Available networks”.
5 Select the desired network.
 When a network with is selected
and the password enter screen is
displayed, enter the password then
Wi-Fi® settings screen
A
B
C
D
E
F
G
Turning Wi-Fi® function on/off
Connecting to a network

53
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
select “OK”.
 The network that was selected Pre-
ferred Network is marked with .
 If button is pressed on Remote
Touch during displaying this screen,
the following function can be set up.
“Details”: Select to display details about the
network.
“Add Wi-Fi* network”: Select to add a
Wi-Fi® network that is not currently dis-
played.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
■Adding a Wi-Fi® network
Available networks which are not dis-
played by searching can be added.
1 Press the button on the Remote
Touch.
2 Select “Add Wi-Fi* network”.
3 Enter the network name and select
“OK”.
4 Select the security type.
5 Enter the password and select
“OK”.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
If a Wi-Fi® device is Wi-Fi Protected
Setup™ compatible, it can be con-
nected to more quickly.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Easy setup”.
5 Select “PIN code” or “Push button”
as determined by the device.
6 Operate the Wi-Fi® device to con-
nect.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Detailed settings”.
5 Select the items to be set.
Select to change the listing order of
your preferred networks and to
Connecting quickly
Detailed Wi-Fi® settings
A

54
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
delete networks from the list.
( P.54)
Select to set automatic connection
to network on/off. When set to on,
the system will automatically con-
nect to the preferred networks that
have been registered.
Select to set the automatic connec-
tion message notification display
on/off.
Select to reset all setup items.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
Any network connected to in the past
is set as a preferred network. The pri-
ority of the networks to connect to can
be changed.
1 Select “Reorder/Remove preferred
networks”.
2 Select the desired network and
select “Move up” or “Move down”
to change the connection priority
of the network.
“Remove”: Select to delete a network.
●If a network is being connected to, pre-
ferred network settings cannot be changed.
Reception level appears on the right
upper side of the screen. ( P.18)
●Communication standards
•802.11b •802.11g•802.11n
●Security•WEP
•WPA™*
Preferred network settings
B
C
D
Wi-Fi® function operating hints
WARNING
●Use Wi-Fi® devices only when safe
and legal to do so.
●Your audio unit is fitted with Wi-Fi® antennas. People with implantable car-
diac pacemakers, cardiac resynchro- nization therapy-pacemakers or implantable cardioverter defibrillators
should maintain a reasonable distance
between themselves and the Wi-Fi®
antennas. The radio waves may affect the opera-tion of such devices.
●Before using Wi-Fi® devices, users of
any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-
pacemakers or implantable cardio- verter defibrillators should consult the manufacturer of the device for infor-
mation about its operation under the influence of radio waves.Radio waves could have unexpected
effects on the operation of such medi- cal devices.
Conditions displayed with Wi-Fi®
icon
Specifications