display lexus LC500 2018 Navigation Manual

99
3
-$@-$I@/BWJ@0.&@ &&

3-3. Route guidance
Navigation system
5Select the desired item to display
the segment.
 Guidance arrow, street name, dis-
tance to the point are displayed.
6 Check that the detail of the seg-
ment is displayed.
“Detour”: Select to detour the segment.
( P.99)
1A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.69)
2 Select the on the map.
3 Select “Route”.
4 Select .
5 Select the desired route segment to
detour.
6 Select “Detour”.
1 A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.69)
2 Select the on the map.
3 Select “Route”.
4 Select .
5 Press the button on the Remote
Touch.
6 Select “Detour list”.
Detour setting
Detouring a route segment from
the turn list
Canceling the detoured setting

100
-$@-$I@/BWJ@0.&@ &&

3-3. Route guidance
7Check that the detours list is dis-
played. Select the desired route
segment.
8 Select “Detour off” to cancel the
detoured setting.
This feature either automatically or
manually changes routes when traffic
messages on the guidance route have
been received.
The dynamic reroute settings can be
changed. ( P.112)
When traffic messages of the guidance
route has been received, the route
automatically changed.
 A pop-up message is displayed on
the screen. The route will be recal-
culated automatically.
When traffic messages of the guidance
route has been received, select manu-
ally whether or not to change routes.
1 A pop-up message is displayed on
the screen. Select “Show detour” to
display the detour route on the
map.
 Select “Ignore” to return to the pre-
vious screen.
2 Select “Detour”.
 Select “Ignore” to return to the pre-
vious screen.
Dynamic rerouting by the traffic
messages
Rerouting automatically
Rerouting manually

101
3
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Navigation system
3-4.Favourite destinations
1Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Check that the favourites list is dis-
played.
 The 4 top favourites (home, work,
and any 2 favourites) are displayed
as quick access buttons.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select “Add new...” box.
4 Select the desired method to
search the desired location.
5 Enter the entry name and then
select “OK”.
6 Check that the entry is registered in
the favourites list.
4 favourite destinations (home, work,
and any 2 favourites) are displayed as
quick access buttons and directly start
the route guidance. Automatic naviga-
tion is available to the 4 favourite desti-
nations.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
Registering an entry
Favourite points and routes on the
map can be registered in the favou-
rites list. Up to 200 entries can be
registered.
Displaying favourites list
Creating a new entry
Registering a quick access desti-
nations

103
3
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Navigation system
5Select “Yes” when the confirmation
screen appears.
6 Check that a progress bar is being
displayed while the data loading is
in progress.
 To cancel this function, select “Can-
cel”.
 A confirmation screen is displayed
when the operation is complete.
7 Check that the entry is registered in
the favourites list.
The POIs and routes that are regis-
tered on your Lexus portal site can be
downloaded via the internet. They will
be stored in the favourites list.
For detailed information about down-
loading POIs and routes: P.222
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites” or “Recent”.
3 Select of the desired entry.
4 Select the desired item.
Entries in the favourites list (Desti-
nation)
Select to display detailed entry
information. ( P.104)
Select to change the entry
name/address.
Select to delete the entry.
Downloading POIs and routes
via the internet
Editing the entry information
Editing the entr y information
A
B
C

104
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Entries in the favourites list (Route)
Select to display detailed entry
information. ( P.104)
Select to edit the route. ( P.104)
Select to delete the entry.
Entries in the last destinations
Select to display detailed entry
information. ( P.104)
Select to delete the entry.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites” or “Recent”.
3 Select of the desired entry.
4 Select “Show details”.
5 Check the details of the entry infor-
mation.
 The address will be marked on the
map.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select of the desired entry.
4 Select “Edit route”.
5 Select of the desired entry.
Select to delete destination and
stopover.
Select to edit address.
Displaying details of the entry
information
A
B
C
A
B
Editing the route
A
B

106
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
3-5.Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select the desired item to be set.
 “Map layout”
Select to change the map layout to 3D
heading-up, 2D heading-up or 2D north-
up. ( P.107)
“Day/Night mode”
Select to change the map screen bright-
ness. ( P.107)
“Arrival information”
Select to change the display of arrival
information to estimated arrival time or
remaining travel time.
 “Speed limits”
Select to set speed limit information on/off.
(If equipped) ( P.108)
“Automatic map zoom”
Select to change the zoom level that is
automatically zoomed into when an area
requiring caution is approached. ( P.109)
“POIs on map”
Select to set displayed POI icon catego-
ries. ( P.109)
“Show guidance arrow”
Select to set the display of route guidance
arrow on/off. ( P.93)
“Show street name”
Select to set the display of the name of the
current street or the next street on/off.
( P.93)
“Show 3D buildings”
Select to set the display of 3D buildings
on/off. ( P.71)
“Show 3D landmarks”
Select to set the display of 3D landmarks
on/off. ( P.72)
“Show signposts”
Select to set the display of signposts on/off.
( P.93)
“Show junction view”
Select to set the display of the junction view
on/off. ( P.94)
“Show lane recommendation”
Select to set the recommended lane dis-
Map settings
Displaying map setting screen
Map setting screen

107
3
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
Navigation system
play on/off. (P.94)
“Show traffic bar”
Select to set the display of traffic bar on/off.
( P.93)
“Show traffic icons”
Select to set the display of the traffic mes-
sage icons on/off. ( P.76)
“Show speed cameras”
Select to set the display of the safety cam-
eras icons on/off. ( P.72)
“Use online data for speed cam-
eras”
Select to enable using online data to show
the safety camera icons.
 “Save recent route”
Select to display a trail of breadcrumbs on
the map.
 “Show highway mode”
Select to set the display of the highway
mode on/off. ( P.93)
“Country information”
This function goes to another screen
where it is possible to:
• Set country information screen when
crossing the border on/off.
• See country information for any country
in the database.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Map layout”.
6 Select the desired item.
Select to display the map screen in
3D heading-up.
Select to display the map screen in
2D heading-up.
Select to display the map screen in
2D north-up.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Day/Night mode”.
6 Select the desired item.
Select to change the map screen to
Map layout
Day/Night mode
A
B
C
A

108
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
day or night mode depending on
the position of the headlight switch.
Select to always display the map
screen in day mode.
Select to always display the map
screen in night mode.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Arrival information”.
6 Select the desired item.
Select to set the arrival information
off.
Select to display the arrival time on
the map screen.
Select to display the remaining time
on the map screen.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Speed limits”.
6 Select the desired item.
Select to display the speed limits on
the map.
Select to receive an audible warn-
ing, if the speed limit will be
exceeded by a certain range.
Select to set the speed warning
threshold. ( P.108)
*:If equipped
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Speed limits”.
6 Select “Speed warning threshold”.
Arrival information
Speed limits*
B
C
A
B
C
Speed warning threshold
A
B
C

109
3
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
Navigation system
7Select the desired item.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Automatic map zoom”.
6 Select the desired item.
Select to set the automatic zoom
off.
Select to set the near distance to
automatic map zoom.
Select to set the normal distance to
automatic map zoom.
Select to set the far distance to
automatic map zoom.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “POIs on map”.
6 Select the desired POI categories.
Select to display all categories.
Select to hide all icons.
Select to display main categories
and subcategories.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Country information”.
Automatic map zoom
A
B
C
D
POIs on map
Country information
A
B
C

110
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
6Select the desired item.
Select to display the country infor-
mation when the vehicle crosses a
border on/off.
Select to display the country infor-
mation.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Traffic”.
5 Select the item to be set.
Select to change the receiving
method for traffic messages.
( P.111)
Select to change settings for traffic
over internet. ( P.111)
Select to set the TMC (Traffic mes-
sage channel) setup.
Select to set the radius for display-
ing traffic messages. ( P.112)
A
B
Traffic message settings
Displaying traffic settings screen
A
B
C
D