start stop button lexus LS400 1996 Gauges, Meters and Service Reminders / 1996 LS400: DRIVING POSITION MEMORY SYSTEM

COMFORT ADJUSTMENT
88
Activating a memorized position
When you push button ª1º or ª2º, the driving position
will be automatically adjusted to the position recorded
for that button.
Conditions for memorized position activation

Ignition key ªONº and shift lever in ªPº position
All parts of the memorized positions can be activated.
However, if the brake pedal is being depressed, the seat
position will not change.

Key not in ignition switch and within 30 seconds of opening
driver's door.
The memorized position can be activated, except for the
tilt and telescopic steering. This will be activated when the
key is inserted into the ignition switch.
If any driving position memory switch is pushed while one of
the memorized driving profiles is being activated, the
operation will stop.To activate the system, push the desired button (ª1º or ª2º)
again.
The driving position memory control system cannot be
operated while the vehicle is moving.
If the vehicle's battery is disconnected, the computer's
memory will be erased and the memorized positions will
have to be set again.
CAUTION!


Do not start the vehicle while the adjustments are
being made.

Take care not to select the wrong button, or the seat
could strike the rear passenger or hit your body
against the steering wheel. If this happens, you can
stop the movement by pressing another driving
position memory switch, or depressing the brake
pedal.