display LEXUS LX470 2007 User Guide

123
2-4. Using other driving systems
2
When driving
Rear view monitor system (if equipped)
■Displayed area
The rear view monitor system assists the driver by displaying an image of
the view behind the vehicle while reversing. The image is displayed in
reverse on the screen. This allows the image to appear in the same manner
as that of the rear view mirror.
Rear view image is displayed
when the shift lever is in “R”.
If you move the lever out of “R”,
the screen returns to the previ-
ous one.
The area covered by the camera is limited.
Objects which are close to either corner of
the bumper or under the bumper cannot be
seen on the screen.
The area displayed on the screen may vary
according to vehicle orientation or road con-
ditions.
Corner of bumper

125
2-4. Using other driving systems
2
When driving
CAUTION
■Observe these precautions to avoid an accident that could result in death or seri-
ous injuries.
●Never depend solely on the monitor system when reversing.
●Always check visually and with the mirrors to confirm your intended path is clear.
●Depicted distances between objects and flat surfaces differ from actual dis-
tances.
●Do not use the system if the back door is open.
■Conditions which may affect the rear view monitor system
●If the back of the vehicle is hit, the camera's position and mounting angle may
change. Contact your Lexus dealer.
●Rapid temperature changes, such as when hot water is poured on the vehicle in
cold weather, may cause the system to function abnormally.
●If the camera lens is dirty, it cannot transmit a clear image. Rinse with water and
wipe with a soft cloth. If extremely dirty, wash with a mild cleanser and rinse.
●The displayed image may be darker and mo ving images may be slightly distorted
when the system is cold.

126
2-4. Using other driving systems
Lexus night view system (if equipped)
The Lexus night view system assists the driver by displaying a monochrome
image of the view in front of the vehicle while driving at night.
Near-infrared rays are irradi-
ated forward and an image con-
verted from its irradiated light is
shown on the head-up display.
The image is shown ranging
from the tip of the low beam to
the high beam.
Near-infrared floodlight
Near-infrared camera
Head-up display
Automatic light control
sensor
■ Turning on the system and adjustin g the brightness of the display
ON/OFF
“MAIN” indicator light comes
on when the system is on.
Darker
Brighter
If the display is too bright, you
cannot see surroundings
through the windshield clearly.

127
2-4. Using other driving systems
2
When driving
■The Lexus night view system can be operated when
●The ignition key is in the “ON” position.
●It is dark outside.
●The headlights are on.
When all the above conditions are met, the head-up display shutter opens automat-
ically and the image sent from the head -up display is shown on the windshield.
■“BEAM” indicator
●When the vehicle starts moving with th e system on, the near-infrared floodlight
is irradiated and the “BEAM” indicator light comes on.
■Conditions unfavorable to correct operation
In the following conditions, the image may not be clear or the view of the road
ahead may not be shown at all.
●Driving on hills with many up and down slopes.
●Driving on road with curves.
●In severe weather conditions such as rain, fog or snow.
●Strong near-infrared light emission, such as the light coming from a vehicle run-
ning in the opposite lane, enters the near-infrared camera.
●An object or clothing of a pedestrian is made of a certain kind of material (ex.
leather).
●The windshield or the lens of the near-infrared floodlight is dirty. (Always keep
the windshield and the lens clean.)
●Double vision of image reduces clarity in some situation.
●The top of the windshield fogs up.

128
2-4. Using other driving systems
CAUTION
■While driving
●This system should be used as a supplemental aid to help you see objects. Never
depend on this system only. Be sure to view objects with your own eyes.
●This system is designed to help you see objects better when driving in a flat area
with few curves in darkness. Use of this function in an area with many curves or
slopes or in a well-lit area could cause an accident.
■Conditions which may affect the Lexus night view system
●If the front bumper is deformed in a collision, etc., the performance of the near-
infrared floodlight will be affected. Have it repaired or replaced by your Lexus
dealer.
●If you notice the inner lens of the near-infrared camera is dirty, have it inspected
by your Lexus dealer.
●If the top of the windshield fogs up, the lens of the near-infrared camera will also
fog up, resulting in deterioration of the system performance. Defog the wind-
shield by pushing the windshield air flow button on the air conditioning.
●If the outside temperature is low, the head-up display may darken or it may take
time to display the image with the system on.
●The automatic light control sensor may not function properly if an object is placed
on the sensor, or anything that blocks the sensor is affixed to the windshield.
■To a v o i d i n j u r y
The near-infrared floodlight irradiates stro ng energy nut visible to the eyes. Do not
stare at the floodlight at close range for a long time.

129
2-4. Using other driving systems
2
When driving
NOTICE
■To avoid damaging the head-up display
●Do not put anything in front of the head-up display shutter. It may hinder the open-
ing or closing of the shutter.
●Do not let drinks spill on the head-up display.
●If an object gets caught in the shutter and it dose not close securely, open the shut-
ter with your hand and remove the object. The shutter will function properly after
you turn the ignition off and then on.

Interior features3
171
3-1. Using the air conditioning system and defogger ........... 172
Automatic air conditioning system (without navigation
system).......................................... 172
Rear air conditioning controls........................................ 180
Rear window and outside rear view mirror defoggers........... 182
3-2. Using the audio system ......... 183 Audio system type (without navigation system) .................. 183
Using the radio ............................ 185
Using the cassette player........ 194
Using the CD player .................. 197
Optimal use of the audio system ......................................... 204
Using the steering switches ...................................... 206
Rear seat audio system .......... 209 3-3. Using the interior lights ........ 212
Interior lights list .......................... 212
3-4. Using the storage features ................................... 215
List of storage features ............ 215
3-5. Other interior features......... 221 Sun visors ....................................... 221
Vanity mirror ............................... 222
Clock.............................................. 223
Outside temperature display ......................................... 224
Ashtrays ........................................ 225
Cigarette lighter ........................ 227
Power outlet ................................ 228
Seat heaters ................................ 230
Coat hooks .................................. 232
Armrest ......................................... 233
Floor mats .................................... 234
Luggage compartment features....................................... 235
Garage door opener............... 237
Compass....................................... 242
Lexus Link System .................... 246

172
3-1. Using the air conditioning system and defogger
Automatic air conditioning system (without navigation system)
Airflow and outlets are automatically selected according to the tempera-
ture setting.
Owners of models equipped with a navigation system should refer to the
“Navigation System Owner’s Manual”.
Temperature controlAutomatic mode
Off
Airflow display
Outside air or
recirculated mode Windshield defoggerAir conditioning
ON/OFF switch
Temperature display
Fan speed display
Air flow control
Fan speed control

185
3-2. Using the audio system
3
Interior features
Using the radio
Press or to choose either an AM or FM band.
Po w e r Vo l u m e
AM·SAT/FM
mode buttons
Seeking the
frequency
Changing the
program types
Seeking any traffic
program station
Present stations Displaying radio
text messages
Scan for receivable
stations
Adjusting the
frequency
(AM, FM mode) or
channel (SAT mode)

186
3-2. Using the audio system
Setting station presets (excluding XM® satellite radio)
Search for desired stations by turning or pressing  or 
on .
Press and hold one of the preset st ations (1 - 6) until you hear a
beep.
Scanning radio stations (excluding XM® satellite radio)
■ Scanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for a few seconds each.
When the desired station is reached, press once again.
■ Scanning all radio stations within range
Press .
“SCAN” appears on the display an d all stations with reception
will be played for a few seconds each.
When the desired station is reached, press once again.
RDS (Radio Data System)
This feature allows your radio to receive station identification information
and program information (classical, ja zz, etc.) from radio stations which
broadcast this information.
■ Receiving RDS broadcasts
Press  or  on the during FM reception.
STEP1
STEP2
STEP1
STEP2
STEP1
STEP2
STEP1