LEXUS NX250 350 2023 Owners Manual

PedestriansRearoftheVehicledisplay
Displays a message to urge the driver to take evasive action when a pedestrianis detected in the detection area behind the vehicle. (A message will also bedisplayed on the center display.)

A
Pedestrian detection icon
B
Brake reminder
6-2.Usingthesafedrivingsupportfunctions
4396
Driving support system

RoadSignAssist*
RSA(RoadSignAssist)
Vehicles with a navigation system: The RSA system detects specific road signs
using the front camera and/or navigation system *
(when speed limit information is
available) and warns the driver via displays and buzzers.
Vehicles without a navigation system: The RSA system detects specific road signs
using the front camera and warns the driver via displays and buzzers.
WARNING

INFORMATION

Duplicate display example
ChangingRSAsettings
The following settings of the RSA can be changed through customize settings.
W P.712
6-2.Usingthesafedrivingsupportfunctions
4436
Driving support system

Dynamicradarcruisecontrol
Dynamicradarcruisecontrol
This dynamic radar cruise control uses radar to detect the presence of vehicles
ahead, determines the current vehicle-to-vehicle distance, and operates to main-
tain a suitable distance from the vehicle ahead. The desired vehicle-to-vehicle
distance can be set by operating the vehicle-to-vehicle distance switch.
Use the dynamic radar cruise control only on highways and expressways.
WARNING

WARNINGThe dynamic radar cruise control determines whether the distance between the
driver
s own vehicle and a designated preceding vehicle is within a set range. It is not capable of making any other type of judgement. Therefore, it is absolutely necessaryfor the driver to remain vigilant and to determine whether or not there is a possibility of
danger.

AConstant speed cruising:When there are no vehicles aheadThe vehicle drives at the speed set by the driver.
If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display will blink and a buzzer will sound.B
Deceleration and follow-up cruising
When a preceding vehicle driving slower than the set vehicle speed is detectedWhen a vehicle is detected driving ahead of your vehicle, the vehicle automatically
decelerates and if a greater reduction in vehicle speed is necessary, the brakes are applied (the stop lights will come on at this time). The vehicle is controlled to maintain
the vehicle-to-vehicle distance set by the driver, in accordance with changes in the
speed of the preceding vehicle. If vehicle deceleration is not sufficient and the vehicle approaches the vehicle ahead, the approach warning will sound.
C
Acceleration
When there are no longer any preceding vehicles driving slower than the set vehiclespeed
The vehicle accelerates until the set vehicle speed is reached and then resumes constant speed cruising.
D
Starting off:
If a preceding vehicle stops, the vehicle will also stop (controlled stop). After thepreceding vehicle starts off, pressing the [ + @ switch or depressing the accelerator
pedal will resume follow-up cruising (start off operation). If a start off operation is not
performed, the controlled stop will continue.
INFORMATION

As the sensor may not be able to correctly detect a vehicle, the system may not operate
properly.