lights LEXUS NX300h 2018 User Guide

44 1-1. For safe use
LEXUS NX300h Owners Manu-
al_USA_OM78212U ■
There is a malfunction in the system
*1
: The system judges a person of adult size as an adult. When a smaller adult sits in the
front passenger seat, the system may not re cognize him/her as an adult depending on
his/her physique and posture. *2
: In the event the front passenger is wearing a seat belt. *3
: In the event the front passenger does not wear a seat belt. *4
: For some children, child in se at, child in booster seat or ch ild in convertible seat, the sys-
tem may not recognize him/her as a child. Factors which may affect this can be the phy-
sique or posture. *5
: Never install a rear-facing ch ild restraint system on the fr ont passenger seat. A forward-
facing child restraint system sh ould only be installed on the front passenger seat when it
is unavoidable. ( → P.50)*6
: In case the indicator light is not illuminated, consult this manual on how to install the child
restraint system properly. ( → P.47)Indicator/warning
light “AIR BAG ON” and “AIR BAG OFF” indica-
tor lights “AIR BAG OFF”
SRS warning light
On
Front passenger’s seat belt reminder light
Devices Front passenger airbag Deactivated
Side airbag on the front passenger seat
Activated
Curtain shield airbag in the front passenger
side
Seat cushion airbag in the front passenger
side Deactivated
Front passenger’s seat belt pretensioner and
force limiter Activated

73
LEXUS NX300h Owners Manu-
al_USA_OM78212U 2 2
Vehicle status information and indicators Vehicle status information
and indicators2-1. Instrument cluster
Warning lights and indicators . 74
Gauges and meters .................... 79
Multi-information display.......... 85
Head-up display ........................... 90
Energy monitor/fuel consumption
screen ............................................ 94

74 2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_OM78212U 2-1.Instrument cluster
For the purpose of explanatio n, the following illustration displays all warning lights
and indicators illuminated.
The units used on the meter and some in dicators may differ depending on the tar-
get region.Warning lights and indicators The warning lights and indicators inform th e driver of the status of the vehicle’s
various systems.
Instrument cluster

752-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_OM78212U 2
Vehicle status information and indicators Warning lights inform the driver of mal-
functions in any of the vehicle’s sys-
tems.
*1
: These lights turn on when the power
switch is turned to ON mode to indi-
cate that a system check is being per-
formed. They will turn off after the
hybrid system is on, or after a few sec-Warning lights (U.S.A.)
Brake system warning light *1

( → P.365)(Red)
(Canada)
Brake system warning light *1

( → P.365)
Charging system warning
light *2
( → P.365)
Low engine oil pressure warn-
ing light *2
( → P.365)
High coolant temperature
warning light *2
( → P.366)
(Yellow)
Brake system warning light *1

( → P.366)
(U.S.A.)
Malfunction indicator lamp *1

( → P.366)
(Canada)
Malfunction indicator lamp *1

( → P.366)
SRS warning light *1
( → P.366)
(U.S.A.)
ABS warning light *1
( → P.367)
(Canada)
ABS warning light *1
( → P.367)
(Yellow) Electric power steering sys-
tem warning light *1
( → P.367) (Red)
Electric power steering sys-
tem warning light *1
( → P.367)
PCS warning light *1
( → P.367)(if equipped)
PKSB OFF indicator *1, 3
( → P.368)(Orange)
LDA indicator *2
( → P.368)
Slip indicator light *1
( → P.368)
Brake hold operated indica-
tor *1, 3
( → P.368)(U.S.A.)
Parking brake indicator *3

( → P.369)
(Canada)
Parking brake indicator *3

( → P.369)
Low fuel level warning light
( → P.369)
Driver’s and front passenger’s
seat belt reminder light
( → P.369)
Rear passengers' seat belt
reminder light *4
( → P.370)
Master warning light *1

( → P.370)
Tire pressure warning light *1

( → P.370)
Brake Override System/
Drive-Start Control warning
light *2
( → P.371)

76 2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_OM78212U onds. There may be a malfunction in a
system if the lights do not turn on, or
turn off. Have the vehicle inspected by
your Lexus dealer. *2
: This light illuminates on the multi-infor-
mation display. *3
: The light flashes to indicate a malfunc-
tion. *4
: This light illuminates on the center
panel. The indicators inform the driver of the
operating state of the vehicle’s various
systems.
WARNING■
If a safety system warning light does
not come on
Should a safety system light such as the
ABS and SRS airbag warning light not
come on when you start the hybrid sys-
tem, this could mean that these systems
are not available to he lp protect you in an
accident, which could result in death or
serious injury. Have the vehicle inspected
by your Lexus dealer immediately if this
occurs. Indicators Turn signal indicator ( → P.176)(U.S.A.)
Headlight indicator ( → P.183)
(Canada)
Tail light indicator ( → P.183)
Headlight high beam indicator
( → P.185)(if equipped)
Automatic High Beam indica-
tor ( → P.186)
Fog light indicator ( → P.189)
“READY” indicator ( → P.150)
EV indicator ( → P.62)
EV drive mode indicator *2

( → P.171)
“Eco” indicator *2
( → P.249)
“Sport” indicator *2
( → P.249)
Dynamic radar cruise control
indicator *2
( → P.217)
Cruise control “SET” indica-
tor *2
( → P.217)
Cruise control indicator *2

( → P.224)

772-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_OM78212U 2
Vehicle status information and indicators *1
: These lights turn on when the power
switch is turned to the ON mode to
indicate that a system check is being
performed. They will turn off after the
hybrid system is on, or after a few sec-
onds. There may be a malfunction in a
system if the lights do not turn on, or
turn off. Have the vehicle inspected by
your Lexus dealer. *2
: This light illuminates on the multi-infor-
mation display. *3
: The light flashes to indicate that the sys-
tem is operating. *4
: The light comes on when the system is
turned off. *5
: When the outside temperature is
approximately 37°F (3°C) or lower, the
indicator will flash for approximately 10
seconds, then stay on. *6
: In order to confirm operation, the BSM
outside rear view mirror indicators illu-
minate in the following situations:
When the power switch is turned to
ON mode while the BSM main switch is
set to ON.
When the BSM main switch is set to
ON while the power switch is in ON
mode.
If the system is func tioning correctly, the
BSM outside rear view mirror indica-
tors will turn off after a few seconds.
If the BSM outside rear view mirror indi-
cators do not illuminate or do not turn
off, there may be a malfunction in the
system.
If this occurs, have the vehicle inspected (White)
LDA indicator *2
( → P.210)(Green)
LDA indicator *2
( → P.210)(Orange)
LDA indicator *2, 3
( → P.210)(if equipped)
Intuitive parking assist indica-
tor ( → P.227)(if equipped)
PKSB OFF indicator *1, 4

( → P.232)
Slip indicator light *1, 3
( → P.251)
VSC off indicator *1, 4
( → P.251)
PCS warning light *1, 4
( → P.205)
(U.S.A.)
Parking brake indicator
( → P.178)
(Canada)
Parking brake indicator
( → P.178)
Brake hold standby indicator *1

( → P.180)
Brake hold operated indica-
tor *1
( → P.180)
Low outside temperature
indicator *2, 5
( → P.79)
(if equipped)
BSM outside rear view mirror
indicators *6, 7
( → P.241)
Security indicator *8
( → P.69,
71) (U.S.A.)
“AIR BAG ON/OFF” indi-
cator *8
( → P.41)(Canada)
“AIR BAG ON/OFF” indi-
cator *7
( → P.41)

84 2-1. Instrument cluster
LEXUS NX300h Owners Manu-
al_USA_OM78212U Switches between odometer, trip
meter and maintenance required infor-
mation displays. When the trip meter is
displayed, pressing and holding the
button will reset the trip meter.
The brightness of the instrument panel
lights can be adjusted.
1 Darker
2 Brighter ■
Instrument panel brightness adjustment
The instrument panel brightness levels
when the tail lights are on and off can be
adjusted individually. However, when the
surroundings are bright (daytime, etc.),
turning on the tail lights will not change the instrument panel brightness. At this time,
any adjustments made to the instrument
panel brightness levels will be applied to
both settings at once.
Changing between the odome-
ter, trip meter and maintenance
required information
Changing the Instrument panel
light brightness

104 3-1. Key information
LEXUS NX300h Owners Manu-
al_USA_OM78212U The electronic keys are equipped with
the following wireless remote control:
Locks all the doors ( → P.106)
Unlocks all the doors ( → P.106)
Opens the windows and moon
roof *1, 2
( → P.106)
Opens and closes the power back
door *1
( → P.113)
Sounds the alarm ( → P.104)*1
: If equipped *2
: This setting must be customized at your
Lexus dealer.
■
Theft deterrent panic mode
When is pressed for longer than
about 1 second, an alarm will sound inter- mittently and the vehicle lights will flash to
deter any person from trying to break into
or damage your vehicle.
To stop the alarm, press any button on the
electronic key.
■
Back door reserve lock function (vehi-
cles with power back door)
This function is a function which reserves
locking of all doors, beforehand, when the
back door is open. When the follow is done,
all the doors except the back door are
locked and then back door will also be
locked at the same time it is closed.
1 Close all doors, except the back door.
2 Push the wireless lock button during the
automatic closing operation of the back
door.
To take out the mechanical key, push
the release button and take the key out. The mechanical key can only be inserted in
one direction, as the key only has grooves
on one side. If the key cannot be inserted in
a lock cylinder, turn it over and re-attempt
to insert it.
After using the mechanical key, store it in
the electronic key. Carry the mechanical
key together with the electronic key. If the
electronic key battery is depleted or the
entry function does not operate properly,
you will need the mechanical key.
( → P.387)NOTICE●
The surface of the card key may be
damaged, or its coating may peel off in
the following situations:
• The card key is carried together with
hard objects, such as coins and keys.
• The card key is scraped with a sharp
object, such as the tip of a mechanical
pencil.
• The surface of the card key is wiped
with thinner or benzene.
Wireless remote control
A
B
C
D
E Using the mechanical key

1073-2. Opening, closing and locking the doors
LEXUS NX300h Owners Manu-
al_USA_OM78212U 3
Before driving
For vehicles with alarm: To prevent unin-
tended triggering of the alarm, unlock the
doors using the wirele ss remote control and
open and close a door once after the set-
tings have been changed. (If a door is not
opened within 60 seconds after is
pressed, the doors will be locked again and
the alarm will automatically be set.)
In a case that the alarm is triggered, imme-
diately stop the alarm. ( → P.71)■
Locking the doors from the outside with-
out a key
1 Move the inside lock button to the lock
position.
2 Close the door.
The door cannot be locked if the power
switch is in ACCESSORY or ON mode, or
the electronic key is le ft inside the vehicle.
The key may not be detected correctly and
the door may be locked.
■
Impact detection door lock release sys-
tem
In the event that the vehicle is subject to a
strong impact, all the doors are unlocked.
Depending on the force of the impact or the
type of accident, however, the system may not operate. ■
Operation signals
Doors:
A buzzer sounds and the emergency flash-
ers flash to indicate that the doors have
been locked/unlocked. (Locked: Once;
Unlocked: Twice)
Windows:
A buzzer sounds to indicate that all win-
dows are opening. ■
Security feature
If a door is not opened within approximately
60 seconds after the vehicle is unlocked,
the security feature automatically locks the
vehicle again. ■
Open door warning buzzer
If the vehicle speed reaches 3 mph (5 km/
h), the master warning light flashes and a
buzzer sounds to indicate that door(s) or
the hood in not fully closed.
The open door(s) or hood is displayed on
the multi-information display. ■
Welcome light illumination control
The side marker, parking, tail and license
plate lights automatically turn on at night
when the doors are unlocked using the
entry function or wireless remote control if
the light switch is in the “AUTO” position. ■
When the door cannot be locked by the
lock sensor on the surface of the door
handle
When the door cannot be locked even if the
lock sensor on the surface of the door han-
dle is touched by a finger, touch the lock
sensor with the palm.
When gloves are being worn, remove the
gloves.Multi-information
display/Beep Unlocking function
Exterior: Beeps 3
times
Interior: Pings
once Holding the driver’s
door handle unlocks
only the driver’s door.
Holding any of the
passenger door han-
dles unlocks all the
doors.
Exterior: Beeps
twice
Interior: Pings
once Holding a door han-
dle unlocks all the
doors.

140 3-4. Adjusting the steering wheel and mirrors
LEXUS NX300h Owners Manu-
al_USA_OM78212U To sound the horn, press on or close to
the mark. The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Adjust the height of the rear view mir-
ror by moving it up and down.
Responding to the level of brightness
of the headlights of vehicles behind, the
reflected light is automatically
reduced. 
Type A
Changing automatic anti-glare func-
tion mode on/offWARNING■
Caution while driving
Do not adjust the steering wheel while
driving.
Doing so may cause the driver to mis-
handle the vehicle and cause an acci-
dent, resulting in death or serious injury. ■
After adjusting the steering wheel
(manual type)
Make sure that the steering wheel is
securely locked.
Otherwise, the steering wheel may move
suddenly, possibly causing an accident,
and resulting in deat h or serious injury.
Sounding the horn Inside rear view mirror The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the heig ht of rear view
mirror
WARNING■
Caution while driving
Do not adjust the position of the mirror
while driving.
Doing so may lead to mishandling of the
vehicle and cause an accident, resulting
in death or serious injury.
Anti-glare function