LEXUS NX300h 2022 Owners Manual

NOTICE

Leavingaparkingspaceusingtheparallelexitingfunction
1With the brake pedal depressed and P shift
position selected, press the Advanced Park
main switch and check that the exit direction
selection screen is displayed on the center
display.
2 Select an arrow on the center display to select the direction you wish to exit.
If the turn signal lever is operated, only exit to the left or right can be selected.
3 Depress the brake pedal and select [Start@ button.
A buzzer will sound, an operation message will be displayed on the multi-information display, and assistance will begin operating. To cancel assistance, press the Advanced
Park main switch. If you feel that the vehicle is approaching close to a surrounding
vehicle, object, person, or gutter:
W P.453 If assistance is canceled, "Advanced Park
Canceled" will be displayed.
4 Perform operations as indicated by the ad-
vice displays until the vehicle is in a position
where exit is possible.
If the steering wheel is not operated, the vehicle
will stop at the exit position. When the vehicle
reaches a position where exit is possible, "You
can exit by moving the steering wheel" will be
displayed. If the steering wheel is operated, "Ad-
vanced Park Finished" will be displayed and assis-
tance will end. Grip the steering wheel and drive
forward.
6-2.Usingthesafedrivingsupportfunctions460

INFORMATION

3Select perpendicular parking (forward/re-
verse) function or parallel parking function.
Only parking spaces for which assist can be per-
formed are displayed.
4 Select the parking direction.
When perpendicular parking (forward/reverse) was selected in step 3
When parallel parking was selected in step 3
5 Using the arrow buttons, adjust the position
of the parking space to be registered, and
then select [OK@ button.
6-2.Usingthesafedrivingsupportfunctions4636
Driving support system

6Select [Start@ button.
A buzzer will sound, an operation message will
be displayed on the multi-information display, an-
dassistance will begin operating. When the brake
pedal is released, "Moving Forward..." will be dis-
played and the vehicle will begin moving forward.
If you feel that the vehicle is approaching close to
a surrounding vehicle, object, person, or gutter:

W P.453
7 Perform operations as indicated by the advice displays until the vehicle stops in
the target parking space.
8 Check the position that the vehicle has stopped. If necessary, adjust the posi-
tion of the parking spot to be registered using the arrow buttons, and then select [Reg.@ button.
"Registration Completed" will be displayed on the center display.

AApproximately 3.3 ft. (1 m)
2 Press the Advanced Park main switch and
check that a possible parking space is dis-
played on the center display.
If the [ MODE @ button is displayed, the button
can be touched to change between the memory
function, perpendicular parking (forward/reverse)
function and parallel parking function.
3 Select the desired parking space, and then select [Start@ button.
Perform the procedure for the perpendicular parking (forward/reverse) function from
step3.
W P.453INFORMATION

NOTICE
RWhen there are leaves, garbage, or other objects which will likely move, in the
parking space
R When the road surface around the parking space has the same repeating
pattern (brick, etc.)

NOTICERWhen the road surface around the parking space has the same repeating
pattern
R When there is a low protrusion on the road surface near the parking space
R When the parking space is on a slope
R When a camera has been splashed by hot or cold water and the lens has
fogged up
R When a camera lens is dirty or covered with water droplets
R When accessories which obstruct the view of the camera are installed
If assistance is ended during registration, perform registration again.