display MAZDA MODEL 3 HATCHBACK 2015 Navigation Manual (in English)

33
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.2.3 Searching for a POI (point of interest) by category
You can search for Places of Interest by their categories and subcategori\
es.
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select
.
4. Select the area around which the Place should be searched for:
• Select
to search around the current position or if it is not available,
around the last know position. (The result list will be ordered by the \
distance
from this position.)
• Select
to search along the active route, and not around a given
point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming gasoline stations or
restaurants. (The result list will be ordered by the length of the nece\
ssary
detour.)
• Select
to search for a place around the destination
of the active route. (The result list will be ordered by the distance f\
rom the
destination.)
• Select
to search for a place within a selected city. (The result list will be
ordered by the distance from the center of the selected city.)

/"7"76#&JOEC







35
10. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.

Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
11. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.

/"7"76#&JOEC







38
11. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
12. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







39
3.1.3 Searching for a Place using Local Search (Only some countries and regions)
If you have an Internet connection, you can search for places using the \
Local Search service.1. Select
after selecting on the MAP screen.
2. Select
.
3. Using the keyboard, start entering the text to search for. This text can be a type of Place (like “Hotel”), a type of goods you are looking for (like “P\
izza” or “Vacuum cleaner”) or
even a street name followed by the city.
(optional) The local search is carried out around your current location. To search around
a different location, enter the name of the city after the word you are looki\
ng for. You can
enter up to 25 characters.
4. After entering the text, select to open the list of results:
5. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
/"7"76#&JOEC







40
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.4 Selecting a map location as the destination
1. Touch anywhere on the map.
2. Drag the cursor and release it at the desired point.
3. Select .
/"7"76#&JOEC







41
4. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
5. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







42
3.1.5 Selecting the destination from your Favorites
1. Select after selecting on the MAP screen.
2. In the Navigation menu, select
.
When is selected, the screen transfers to the Favorites screen. Select your \
registered favorite.
3. The selected location is shown on the map.
The system transitions to the next screen by selecting , or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
4. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC







43
3.1.6 Selecting a recent destination from the History
1. Select after selecting on the MAP screen.
2. In the Navigation menu, select
.
3. The list of recent destinations appears. Smart History promotes three de\
stinations to the fi rst page based on your previous routes (most likely destinations). The rest of the
destinations are ordered by time they were last selected. If necessary, scroll the list to
see earlier destinations.

4. Select a destination from the list.
5. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
/"7"76#&JOEC







44
6. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate as follows:
1. Select
after selecting on the MAP screen.
2. In the Navigation menu, select
.
3. Input map coordinate value of and .
4. When fi nished, select .

5. Select .
/"7"76#&JOEC







45
6. The selected location is shown on the map.
The system transitions to the next screen by selecting
, or it returns to the
previous screen by selecting the button. By touching the location displayed on the
screen, you can change the destination to anywhere on the map.
Note! •
: You can search for POI (point of interest) around the
selected location.
•
: The selected location can be registered to
Favorites.
7. Navigation starts if
is selected, or after 10 seconds of no user interaction.
By touching the location displayed on the screen, you can verify the rou\
te. Additionally,
the route can be revised by selecting other options.
/"7"76#&JOEC