engine MAZDA MODEL 6 2016 Betriebsanleitung (in German)

6–72
Wartung und PÀ ege
Wartung durch Fahrzeughalter
*nur bestimmte Modelle
Beschreibung Nennleistung Schaltkreis
19 HEATER 40 A Klimaanlage
20 DCDC REG 30 A Schutz für verschiedene Schaltkreise
*
21 ENGINE.IG1 7,5 A Motorsteuerung
22 C/U IG1 15 A Schutz für verschiedene Schaltkreise
23 H/L LOW L
HID L 15 A Abblendlicht (links)
24 H/L LOW R 15 A Abblendlicht (rechts)
25 ENGINE3 15 A Motorsteuerung
26 ENGINE2 15 A Motorsteuerung
27 ENGINE1 15 A Motorsteuerung
28 AT 15 A Getriebesteuerung
* , Zündschalter
29
H/CLEAN 20 A Scheinwerferwascher *
30 A/C 7,5 A Klimaanlage
31 AT PUMP 15 A Getriebesteuersystem
*
32 STOP 10 A Bremsleuchten, Nebelschlussleuchte *
33 R.WIPER 15 A Heckscheibenwischer * , Diebstahl-Alarmanlage *
34 H/L HI 20 A Fernlicht
35 HID R
ST.HEATER 15 A Lenkradheizung
*
36 FOG 15 A Nebelscheinwerfer
*
37

7,5 A Motorsteuerung
38 AUDIO2 7,5 A Audioanlage
39 GLOW SIG 5 A Motorsteuerung
*
40 METER2 7,5 A Armaturenbrett *
41 METER1 10 A Armaturenbrett
42 SRS1 7,5 A Airbags
43 BOSE 25 A Fahrzeuge mit Bose
® -Audioanlage *
44 AUDIO1 15 A Audioanlage
45 ABS/DSC S 30 A ABS, Dynamische Stabilitätskontrolle
46 FUEL PUMP 15 A Kraftstoffsystem
*
47 FUEL WARM 25 A Kraftstoffheizung *
48 TAIL 15 A Schlussleuchten, Kennzeichenbeleuchtung *
49 FUEL PUMP2
SCR2 25 A Kraftstoffsystem
*
50 HAZARD 25 A Warnblinkleuchten, Blinkleuchten, Schlussleuchten,
Begrenzungsleuchten, Nummernschildleuchten
51 DRL 15 A Tagesfahrleuchten
*
52 R.OUTLET2 15 A Zusatzsteckbuchse
53 HORN 15 A Horn
54 ROOM 15 A Deckenleuchte



Selector
Maintenance Monitor
“Oil Change” with flexible setting*1 is available. Consult an Authorised Mazda
Repairer for details*2.
Maintenance Monitor (Type A/Type B audio)
Reset method
Press and hold the selector with the ignition switched off, then switch it on. Keep
pressing the selector for more than 5 seconds. The master warning light will flash
for a few seconds when the reset is completed.
Maintenance Monitor (Type C/Type D audio)
1. Select the icon on the home screen to display the “Applications” screen.
3. Select “Maintenance” to display the maintenance list screen.
4. Switch the tab and select the setting item you want to change.
You can customize settings in the setup display as follows:
Explanation Ta b
ScheduledNotification can be switched on/off.Item
Setting
Displays the time or distance until maintenance is due. Time
(months)
Distance
(km or mile)
ResetSelect this item to set the maintenance period.
The wrench indication/indicator light in the instrument cluster will
be illuminated when the remaining distance is less than 1,000 km or
600 mile, or the remaining number of days is less than 15
(whichever comes first).
Resets the time and distance to the initial values.
Once the system turns on, it needs to be reset whenever carrying out
maintenance.
2. Select “Vehicle Status Monitor” to display the current warnings.
1*1 The engine oil flexible maintenance setting is available (only some models).
Based on the engine operating conditions, the onboard computer in your vehicle
calculates the remaining oil life.
*2 When the engine oil flexible maintenance setting is selected, the system must be
reset whenever replacing the engine oil regardless of the wrench indicator light
display.
When the engine oil flexible maintenance setting is selected, the wrench indicator
light in the instrument cluster will be illuminated when remaining oil life becomes
less than 1,000 km (600 mile), or remaining days are less than 15 (Whichever
comes first).


Explanation Ta b
Notification can be switched on/off.Item
Setting
Displays the distance until tyre rotation is due.
Distance
(km or mile)
ResetSelect this item to set the tyre rotation distance.
The wrench indication/indicator light in the instrument cluster will
be illuminated when the remaining distance is less than 1,000 km or
600 mile.
Resets the remaining distance to the initial value.
Once the system turns on, it needs to be reset whenever rotating the
tyres. Tyre Rotation
Oil Change
2
Notification can be switched on/off. Setting*1
Displays the distance until the oil replacement is due.
Distance
(km or mile)
Reset
*2
Select this item to set the oil replacement distance.
The wrench indication/indicator light in the instrument cluster will
be illuminated when the remaining distance is less than 1,000 km or
600 mile.
Resets the remaining distance to the initial value.
Once the system turns on, it needs to be reset whenever replacing
the engine oil.
*1 The engine oil flexible maintenance setting is available (only some models).
Consult an Authorised Mazda Repairer for details.
*2 Whenever the engine oil is replaced, the vehicle engine control unit reset is
necessary for SKYACTIV-D 2.2. When the engine oil flexible maintenance setting is selected, you will see the
following items in the display. The vehicle calculates the remaining oil life based
on the engine operating conditions and lets you know when an oil change is due
by illuminating the wrench indicator light in the instrument cluster.
Your Authorised Mazda Repairer will be able to reset the engine control unit or
refer to the vehicle engine control unit reset procedure.
Explanation Ta b
Oil ChangeDisplays the engine oil life until the oil replacement is due.Item
Oil life (%)
ResetThe wrench indication/indicator light in the instrument cluster will
be illuminated when remaining oil life distance is less than 1,000 km
(600 mile), or remaining days are less than 15 (whichever comes
first).
Resets the remaining oil life to 100 %.
The system must be reset whenever replacing the engine oil.