stop start MAZDA MODEL CX-3 2015 (in English) Workshop Manual

Page 461 of 671

5–139
Interior Features
Bluetooth®
Example of use (Location Based
Services)
1. Select the desired station from the
Nearby tab on the main menu.
The destination name or address
playback starts in the order of the
destination name list.
2. When the icon is selected, the
currently displayed destination is
displayed on the navigation system
(vehicles with navigation system).
3. When the
icon is selected, a phone
call is placed to the currently displayed
destination.
4. Select the
icon and display the
content list.
Selection of other destinations from the
list can be made.
Shout
Some social stations, such as Facebook or
Caraoke, support the ability to record and
share voice messages using the “Shout”
function.
1. Select the
icon and start the
countdown (3, 2, 1, 0). Recording starts
when the countdown reaches zero.
2. Records voice.
3. Select
and store/post the
recording.
NOTE
  Recordable time varies depending on
the station (Max. 30 seconds).
  Recording stops automatically when
the recordable time has elapsed. You
can then post or delete the recording.
$9@&;&&%@&EJUJPOJOEC

Page 575 of 671

7–29
If Trouble Arises
Overheating
Overheating
If the High engine coolant temperature
warning light illuminates, the vehicle loses
power, or you hear a loud knocking or
pinging noise, the engine is probably too
hot.
WARNING
Switch the ignition to off and make
sure the fan is not running before
attempting to work near the cooling
fan:
Working near the cooling fan when it
is running is dangerous. The fan could
continue running indefi nitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not remove either
cooling system cap when the engine
and radiator are hot:
When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury.
Open the bonnet ONLY after steam is
no longer escaping from the engine:
Steam from an overheated engine is
dangerous. The escaping steam could
seriously burn you.
If the High engine coolant temperature
warning light illuminates:
1. Drive safely to the side of the road and
park off the right-of-way.
2. Put a vehicle with an automatic
transaxle in park (P), a manual
transaxle in neutral.
3. Apply the parking brake.
4. Turn off the air conditioner.
5. Check whether coolant or steam is
escaping from the engine compartment.
If steam is coming from the engine
compartment:
Do not go near the front of the vehicle.
Stop the engine.
Wait until the steam dissipates, then
open the bonnet and start the engine.
If neither coolant nor steam is
escaping:
Open the bonnet and idle the engine
until it cools.
CAUTION
If the cooling fan does not operate
while the engine is running, the engine
temperature will increase. Stop the
engine and call an expert repairer,
we recommend an Authorised Mazda
Repairer.
6. Make sure the cooling fan is operating,
then turn off the engine after the
temperature has decreased.
7. When cool, check the coolant level.
If it is low, look for coolant leaks from
the radiator and hoses.
$9@&;&&%@&EJUJPOJOEC

Page 581 of 671

7–35
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
If a Warning Light Turns On or Flashes
If any warning light turns on/fl ashes, take appropriate action for each light. There is no
problem if the light turns off, however if the light does not turn off or turns on/fl ashes again,
consult an Authorised Mazda Repairer.
(Vehicles with type C/type D audio)
The warning contents can be verifi ed on the audio.
1. Select the
icon on the home screen to display the applications screen.
2. Select the “Warning Guidance”.
Stop Vehicle in Safe Place Immediately
If any of the following warning lights turns on, the system may have a malfunction. Stop the
vehicle in a safe place immediately and contact an Authorised Mazda Repairer.
Signal Warning
Brake System Warning
Light
This warning has the following functions:
Parking brake warning/Warning light inspection
The light illuminates when the parking brake is applied with the ignition switched to
START or ON. It turns off when the parking brake is fully released.
Low brake fl uid level warning
If the brake warning light remains illuminated even though the parking brake is
released, the brake fl uid may be low or there could be a problem with the brake
system. Park the vehicle in a safe place immediately and contact an expert repairer, we
recommend an Authorised Mazda Repairer.
WARNING
Do not drive with the brake system warning light illuminated. Contact an expert
repairer, we recommend an Authorised Mazda Repairer to have the brakes
inspected as soon as possible:
Driving with the brake system warning light illuminated is dangerous. It
indicates that your brakes may not work at all or that they could completely fail
at any time. If this light remains illuminated, after checking that the parking
brake is fully released, have the brakes inspected immediately.
CAUTION
In addition, the effectiveness of the braking may diminish so you may need to
depress the brake pedal more strongly than normal to stop the vehicle.
$9@&;&&%@&EJUJPOJOEC

Page 583 of 671

7–37
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Signal Warning
Engine Oil Warning
Light This warning light indicates low engine oil pressure.
CAUTION
Do not run the engine if the oil pressure is low. Otherwise, it could result in
extensive engine damage.
If the light illuminates or the warning indication is displayed while driving:
1. Drive to the side of the road and park off the right-of-way on level ground.
2. Turn off the engine and wait 5 minutes for the oil to drain back into the sump.
3. Inspect the engine oil level 6-28 . If it's low, add the appropriate amount of engine oil
while being careful not to overfi ll.
CAUTION
Do not run the engine if the oil level is low. Otherwise, it could result in extensive
engine damage.
4. Start the engine and check the warning light.
If the light remains illuminated even though the oil level is normal or after adding oil,
stop the engine immediately and have your vehicle towed to an expert repairer, we
recommend an Authorised Mazda Repairer.
(Red)
High Engine Coolant
Temperature Warning
Light
The light fl ashes when the engine coolant temperature is extremely high, and
illuminates when the engine coolant temperature increases further.
Handling Procedure
Flashing light
Drive slowly to reduce engine load until you can fi nd a safe place to stop the vehicle
and wait for the engine to cool down.
Illuminated light
This indicates the possibility of overheating. Park the vehicle in a safe place
immediately and stop the engine.
Refer to Overheating 7-29 .
CAUTION
Do not drive the vehicle with the high engine coolant temperature warning light
illuminated. Otherwise, it could result in damage to the engine.
$9@&;&&%@&EJUJPOJOEC

Page 585 of 671

*Some models.7–39
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Signal Warning
ABS Warning Light If the ABS warning light stays on while you're driving, the ABS control unit has detected a
system malfunction. If this occurs, your brakes will function normally as if the vehicle had
no ABS.
Should this happen, consult an expert repairer, we recommend an Authorised Mazda
Repairer as soon as possible.
NOTE
When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs, it is the result of the weak battery and
does not indicate an ABS malfunction.
Recharge the battery.
(With DSC vehicles)
The brake assist system does not operate while the ABS warning light is illuminated.
Check Engine Light If this light illuminates while driving, the vehicle may have a problem. It is important to
note the driving conditions when the light illuminated and consult an expert repairer, we
recommend an Authorised Mazda Repairer.
The check engine light may illuminate in the following cases:
The engine's electrical system has a problem. The emission control system has a problem. (SKYACTIV-G 2.0)
The fuel tank level being very low or approaching empty. The fuel-fi ller cap is missing or not tightened securely.
If the check engine light remains on, or it fl ashes continuously , do not drive at high speeds
and consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as
possible.
(Amber)
i-stop Warning
Light
*
When the light is turned on
A problem in the system may be indicated under the following conditions. Have your
vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
The light does not turn on when the ignition is switched ON. The light continues to remain on even though the i-stop OFF switch has been pressed
while the engine is running.
When the light is fl ashing
The light continues to fl ash if the system has a malfunction. Have your vehicle inspected at
an expert repairer, we recommend an Authorised Mazda Repairer.
(Amber)
i-ELOOP Warning
Light
*
The light turns on if there is any malfunction in the i-ELOOP system. Consult an expert
repairer, we recommend an Authorised Mazda Repairer.
$9@&;&&%@&EJUJPOJOEC

Page 590 of 671

*Some models.7–44
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Signal Warning Action to be taken
Seat Belt Warning
Light (Front seat) The seat belt warning light turns on if the
driver or front passenger's seat is occupied
and the seat belt is not fastened with the
ignition switched ON.
If the driver or front passenger's seat belt is
unfastened (only when the front passenger
seat is occupied) and the vehicle is driven at
a speed faster than about 20 km/h (12 mph),
the warning light fl ashes. After a short time,
the warning light stops fl ashing, but remains
illuminated. If a seat belt remains unfastened,
the warning light fl ashes again for a given
period of time.
NOTE
If the driver or front passenger's seat belt
is unfastened after the warning light turns
on, and the vehicle speed exceeds 20
km/h (12 mph), the warning light fl ashes
again.
Placing heavy items on the front
passenger's seat may cause the front
passenger's seat belt warning function
to operate depending on the weight of
the item.
To allow the front passenger's seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on
the front passenger's seat. The sensor
may not function properly because the
additional seat cushion could cause
sensor interference.
If a small child is seated on the front
passenger's seat, the warning light may
not operate. Fasten the seat belts.
(Red)
Seat Belt Warning
Light (Rear seat)
*
If the rear seat belts are not fastened while the
ignition is switched ON , the driver and the
passenger are alerted by the warning light.
The warning light operates even if there is no
passenger on the rear seat.
NOTE
If a rear seat belt is not fastened by a
certain period of time after the engine has
been started, the warning light turns off. Fasten the seat belts.
$9@&;&&%@&EJUJPOJOEC

Page 598 of 671

*Some models.7–52
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Key Left-in-luggage Compartment
Warning Beep (With the advanced
keyless function)
If the key is left in the luggage
compartment with all doors locked
and the liftgate closed, a beep sound is
heard for about 10 seconds to remind
the driver the key has been left in the
luggage compartment. If this happens,
open the liftgate by pressing the electric
liftgate opener and remove the key. A key
removed from the luggage compartment
may not function because its functions
may have been temporarily suspended.
To restore the key function, perform the
applicable procedure (page 3-7 ).
Key Left-in-vehicle Warning Beep
(With the advanced keyless
function)
If a key is left in the vehicle cabin and all
the doors and the luggage compartment
are locked using a separate key, a beep
sound is heard for about 10 seconds to
remind the driver that the key has been
left in the vehicle cabin. If this happens,
open the door and remove the key. A key
removed from the vehicle this way may
not function because its functions may
have been temporarily suspended. Perform
the applicable procedure to restore the
functions of the key (page 3-7 ).
i-stop Warning Beep *
















 If the driver's door is opened while
engine idling is stopped, the warning
sound operates to notify the driver that
engine idling is stopped. It stops when
the driver's door is closed.
 


 The warning sound operates if the
following operations are performed
while the engine idling is stopped. In
such cases, the engine does not restart
automatically to ensure safety. Start the
engine using the normal method.
 

 
(European model)
 The driver's seat belt is unfastened and
the driver's door is opened.
 

 
(Except European model)



 
(Manual transaxle)
 With the shift lever in a position other
than neutral, the driver's seat belt is
unfastened and the driver's door is
opened.
 

 
(Automatic transaxle)
 With the selector lever in the D or
M (not in second gear fi xed mode)
position, the driver's seat belt is
unfastened and the driver's door is
opened.
Vehicle Speed Alarm *
The vehicle speed alarm function is
designed to alarm the driver via a single
beep sound and a warning indication in the
instrument cluster that the previously set
vehicle speed has been exceeded.
You can change the vehicle speed setting
at which the warning is triggered (page
4-31 ).
$9@&;&&%@&EJUJPOJOEC

Page 631 of 671

9–5
Specifi cations
Specifi cations
Electrical System
Battery
Classifi cation Specifi cation
SKYACTIV-G 2.0 N-55 *1 or Q-85 *1
12V-55Ah/20HR *2 or 12V-65Ah/20HR *2
SKYACTIV-D 1.5 S-95 *1
*1 N-55, Q-85 or S-95 is designed for i-stop system (FOR STOP & START)/i-ELOOP system. Only N-55, Q-85
or S-95 should be used to ensure correct operation of i-stop system (FOR STOP & START)/i-ELOOP system.
Consult an expert repairer, we recommend an Authorised Mazda Repairer for details.
*2 Not for i-stop system/i-ELOOP system.
Spark-plug
Classifi cation Specifi cation
SKYACTIV-G 2.0 Mazda Genuine spark
plug
*1 PE5R-18-110 or PE5S-18-110
*1 The spark plugs provide the SKYACTIV-G its optimum performance. Consult an expert repairer, we
recommend an Authorised Mazda Repairer for details.
CAUTION
When cleaning the iridium plugs, do not use a wire brush. The fi ne particulate coating on
the iridium alloy and platinum tips could be damaged.
$9@&;&&%@&EJUJPOJOEC

Page 649 of 671

10–3
Index
C
Capacities .............................................. 9-7
Carbon Monoxide ............................... 3-27
Cargo Sub-Compartment .................. 5-153
Cell Phones ........................................... 8-4
Child Restraint
Categories of child-restraint
systems .......................................... 2-26
Child-restraint precautions ............ 2-21
Child-restraint system installation ... 2-26
Child-restraint system suitability for
various seat positions table............ 2-31
Installing child-restraint systems... 2-35
Child Safety Locks for Rear Doors ..... 3-19
Clock ................................................... 5-30
Collision warning ................................ 7-54
Coming Home Light System .............. 4-63
Control Status Display ........................ 4-89
Cruise Control ................................... 4-158
Cruise Control Switch ................. 4-158
Cruise Main Indicator Light (Amber)/
Cruise Set Indicator Light
(Green) ........................................ 4-159
Cruise Control Set Vehicle Speed
Display ................................................ 4-31
Cup Holder ........................................ 5-150
D
Defogger
Mirror ............................................ 4-74
Rear window ................................. 4-73
Diesel Particulate Filter ..................... 4-167
Dimensions ........................................... 9-7
Direct Mode
Automatic transaxle ...................... 4-56
Direction Indicators ............................ 4-67
Distance Recognition Support System
(DRSS) .............................................. 4-118
Indication on display ................... 4-119
Door Locks .......................................... 3-10
Drive selection .................................... 4-93 Driving In Flooded Area ..................... 3-52
Driving Tips
Automatic transaxle ...................... 4-57
Driving in fl ooded area.................. 3-52
Floor mat ....................................... 3-48
Hazardous driving ......................... 3-47
Rocking the vehicle ....................... 3-49
Running-in..................................... 3-46
Saving fuel and protection of the
environment................................... 3-46
Turbocharged vehicles (SKYACTIV-D
1.5) ................................................ 3-53
Winter driving ............................... 3-49
Dynamic Stability Control (DSC) ....... 4-84
TCS/DSC Indicator Light ............. 4-84
E
Effectiveness Display .......................... 4-92
Electronic steering lock warning beep ... 7-54
Emergency Starting
Push-Starting ................................. 7-27
Running Out of Fuel (SKYACTIV-D
1.5) ................................................ 7-28
Starting a Flooded Engine
(SKYACTIV-G 2.0) ...................... 7-27
Emergency Stop Signal System .......... 4-79
Emergency Towing
Towing Description ....................... 7-31
Towing/Tiedown Hooks ................ 7-32
Emission Control System (SKYACTIV-D
1.5) ...................................................... 3-26
Emission Control System (SKYACTIV-G
2.0) ...................................................... 3-25
Ending Display .................................... 4-92
Engine
Bonnet release ............................... 6-19
Coolant .......................................... 6-29
Engine Compartment Overview .... 6-21
Exhaust gas.................................... 3-27
Oil .................................................. 6-23
Starting ............................................ 4-5
Essential information ............................ 6-2
$9@&;&&%@&EJUJPOJOEC

Page 651 of 671

10–5
Index
I
i-ACTIVSENSE .................................. 4-98
Active safety technology ............... 4-98
Adaptive Front Lighting System
(AFS) ........................................... 4-101
Adjustable Speed Limiter ............ 4-134
Blind Spot Monitoring (BSM) .... 4-111
Camera and sensors ....................... 4-99
Distance Recognition Support System
(DRSS) ........................................ 4-118
Forward Sensing Camera (FSC) ... 4-148
High Beam Control System
(HBC) .......................................... 4-102
Lane Departure Warning System
(LDWS) ....................................... 4-105
Laser Sensor ................................ 4-154
Mazda Radar Cruise Control
(MRCC)....................................... 4-124
Pre-crash safety technology .......... 4-99
Radar Sensors (Rear)................... 4-156
Radar sensor (front)..................... 4-151
Rear Cross Traffi c Alert (RCTA) ... 4-121
Smart Brake Support (SBS) ........ 4-145
Smart City Brake Support
(SCBS) ........................................ 4-139
i-ELOOP ............................................. 4-85
Control status display .................... 4-87
i-ELOOP indicator light ................ 4-87
i-stop ................................................... 4-13
i-stop OFF switch .......................... 4-20
Indicator light (Green)................... 4-18
Vehicle roll prevention function .... 4-21
Warning light (Amber) .................. 4-18
i-stop warning beep ............................. 7-52
If a Warning Light Turns On or
Flashes................................................. 7-35
If the Active Driving Display does not
operate ................................................. 7-56
Ignition
Switch .............................................. 4-4
Ignition not switched off (STOP) warning
beep ..................................................... 7-51 Illuminated Entry System ................. 5-147
Immobilizer System ............................ 3-40
Indicator Lights ................................... 4-39
Glow plug ...................................... 4-43
Low engine coolant temperature ... 4-42
Wrench .......................................... 4-42
Inspecting Brake/Clutch Fluid Level ... 6-31
Inspecting Coolant Level .................... 6-29
Inspecting Engine Oil Level ............... 6-28
Inspecting Washer Fluid Level............ 6-32
Instrument Cluster ............................... 4-23
Instrument panel Illumination ............. 4-29
Interior Care ........................................ 6-66
Cleaning the Lap/Shoulder Belt
Webbing ........................................ 6-68
Cleaning the Upholstery and Interior
Trim ............................................... 6-66
Cleaning the Window Interiors ..... 6-68
Instrument panel Precautions ........ 6-66
Maintenance of the Active Driving
Display .......................................... 6-68
Interior Lights ................................... 5-146
Luggage Compartment Light ...... 5-146
Map Lights .................................. 5-146
Overhead Lights .......................... 5-146
J
Jack ....................................................... 7-6
Jump-Starting ...................................... 7-24
K
Key Suspend Function .......................... 3-7
Key left-in-luggage compartment warning
beep (With the advanced keyless
function) .............................................. 7-52
Key left-in-vehicle warning beep (With the
advanced keyless function) ................. 7-52
Keyless Entry System ........................... 3-3
Key removed from vehicle warning
beep ..................................................... 7-51
$9@&;&&%@&EJUJPOJOEC

Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 next >